PELICAN 1510 CASE with FOAM! How to customize and setup your foam!
Pelican 1510 case with foam (amzn.to/3WcM2Lw) is a versatile and long lasting hard shell case that comes with a variety of different modifications! The Pelican 1510 case with pluck and pull foam is unique in that it allows the buyer to modify the placement of their goods however they see fit with their needs.
When first getting the Pelican 1510 case with foam, I was hesitant to start cutting right into the foam because I knew I wanted to be deliberate with what I cut out. I used the instructions that came with the pelican foam case, which were helpful so I decided to make a video on the process I did to cut out the pieces of pluck and pull foam.
This video is for anyone looking how to configure the foam on their Pelican 1510 case with foam.
This Pelican 1510 case has been great for me since I've used it and has kept my camera and lenses beyond safe.
#Pelicancase #pelican1510 #pelican #cameracase
LINKS FOR LENSES IN THE VIDEO!
Sony FE PZ 16-35mm F4 G
amzn.to/3Rnkgtd
Sony - FE 24-105mm F4 G OSS Standard Zoom Lens
amzn.to/3LUIB8r
Sony FE 24-70mm F2.8 GM II Lens
amzn.to/3SeXy7L
Canon EF 17-40mm f/4L USM Ultra Wide Angle Zoom Lens for SLR Cameras
amzn.to/3SnGhJs
Sony A7iii:
www.amazon.com/gp/product/B07B43WPVK/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07B43WPVK&linkCode=as2&tag=paulmcgovernj-20&linkId=4bf57b48e2c1e9c4b5edaf5a38085751
Saramonic Blink500 B4:
www.amazon.com/gp/product/B081ZQB8B8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B081ZQB8B8&linkCode=as2&tag=paulmcgovernj-20&linkId=137a46b74fc4e0b5958bf8227b5124dd
Neewer Photography 3 Roller Wall Mounting Manual Background Support System:
www.amazon.com/gp/product/B00RV90LE8/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00RV90LE8&linkCode=as2&tag=paulmcgovernj-20&linkId=6bb941741db3a17bea0e5954eed93f4
Tripod: amzn.to/3zmH1oE
GVM 800D-RGB LED Studio 3-Video Light Kit -- amzn.to/3rUm6pm
ROKINON CINE DS KIT:
www.amazon.com/gp/product/B07DMGNXPX/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07DMGNXPX&linkCode=as2&tag=paulmcgovernj-20&linkId=f7e07bdbb5bbd7bbd9239dec11d98787
Thanks so much for watching!
IG: @pmcg34
paulmcgovernjr.com
Пікірлер: 27
Here's a tip for anyone starting fresh. Unless you're setting up a long-time kit that's been the same forever, pack things a little tighter rather than spreading them out to fill the case. At least for me, I always end up wanting to add things later as I get used to a workflow, and if you spread everything out then you have to start getting really creative with how things fit. If you leave a spot for future, it makes things so much easier.
@PaulMcGovernJr
6 ай бұрын
Great tip!
I found it easy to trace out my items and then use a hot but not too hot soldering iron to easily score out my foam about 20mm then use a scalpel to cut the rest of the way through. There will be some nasty fumes so do it in a well ventilated area and use a mask. It's a simple and efficient way.
Thanks for sharing some tips. This is a very helpful video and I appreciate it.
@PaulMcGovernJr
Жыл бұрын
Thanks! Good to hear!
Very cool.
Thanks for this man.
@PaulMcGovernJr
4 ай бұрын
💪💪
Thanks for watching! Let me know if you have questions about plucking and pulling the foam in your case!
that's a nice and sturdy case! and definitely looking forward to your underwater vlog to show how to kill a shark with it!
@PaulMcGovernJr
Жыл бұрын
Yeah honestly it was great- had a ton of pricey equipment in here and wasn’t worried. For the shark-Bonk it over the head with this case is the first step!
@dannychen1064
Жыл бұрын
@@PaulMcGovernJr 😁😁and the amazing thing is, the equipment won't hurt at all after the bonk!
@PaulMcGovernJr
Жыл бұрын
@@dannychen1064 Boom! The perfection of the Pelican 1510!
Why did oyu not jsut put your lens hoods on the lenses? - find it a little strange that you made a separate section for them? - the lens hoods on the lenses would have made it a bit tidier and also offer protection to the lens and allow you to use the space for something else?.. looks good though and all in all you made a good job as the foam is SO fiddly...
I have a 1535 and recently I got a 1510 to carry the gear I will take with me. And not my entire camera load lol
@PaulMcGovernJr
Ай бұрын
Great for multiple uses!
Can you use these for fishing equipment? May get one for a family member.
@PaulMcGovernJr
Жыл бұрын
Yeah, could use it for anything really. It’s a great case! Very durable
What is the minimum number of cubic foam rows you need between two objects?
@PaulMcGovernJr
Жыл бұрын
I would try and leave at least 2, maybe 3. If you leave 1 row it’ll break, and even 2 can be a little weak…but 2 is manageable.
Foam party! Oh, that's something different; ask Michael.
@PaulMcGovernJr
Жыл бұрын
😂
Trekpak. Forget foam
Shame on you dude. I see you abandoned your Missus since she buggered your foam edge. Sorry Rachael, Paul made it about you.
@PaulMcGovernJr
10 ай бұрын
Lol - I take my foam very seriously.
@ryanyoder7573
6 ай бұрын
I would have probably been kind of a dick and then would feel bad about it later.