Can you please post a complete schematic for this experiment and include an explanation of the startup voltages of all the capacitor banks? It is impossible to determine your exact wiring configuration for this video.

Could you please add the schematic in your amazing innovative presentation as we conceived partially but not adequate because the video presentation is unstable enough.

Brother, so grateful you take the time to share your Brilliance in a way even I can begin to understand

Guys it's just a series loop from the cell, through the caps, through the primary of the transformer and back to the cell through the led. You have a wire from the secondary going through a diode and back to the caps, capturing the spike. I'm sure he will explain it because he's a nice guy but it's really not hard to understand if you watch the previous videos.

@joellagace1679

Ай бұрын

That's really all it is,...... :) no secrets no gimmicks

@joellagace1679

Ай бұрын

Some get confused with the transformer and think its just a normal basic L/C oscillator that runs for a few seconds and ping pongs between caps until drained. I put heavy emphasis the transformer is not even needed its just a quick method to isolate and capture the spike.

@marcelfiechter7436

29 күн бұрын

Thanks a lot for this short explanation. We are not all on the same level. Your explanation helped me a lot.

@marcelfiechter7436

29 күн бұрын

@@joellagace1679 I guess instead of a transformer it could be done also with a MOSFET NPN.

@Someone-A3

29 күн бұрын

But isn't the transformer AC? How is working with DC?

This is epic man! Great work :)

❤❤

I ordered magnesium, shungite and PEG 4000. I won't have time for experiments until September :(

I have tried to make a "battery" similar to yours. I just added a couple more crystallizing chemicals to your polyethylene glycol. As I do not have copper oxide yet, I've used galena and pyrite. When I left it to dry, I left it connected for some hours to my PS 60V to align the molecules and crystals. What is interesting about that "battery" is it acts as a diode and a battery at the same time. On the positive terminal, there is the minus port of the diode if expressed graphically. It gives me 1.6V and 0.4mA. Just wondering, the diode lits becouse the external input via your osciloscope?

Are both wires from the output of the transformer connecting to the caps or just the one wire with the diode? Still trying to understand this setup. 😕

7:50 so the ZVS works like that , it uses the flyback to trigger the next pulse and the caps are doing the slow rise and fall . thats how i understand the zvs , dont quote me

We need a schematic, for the dummies like me.

Does it need to be a blinky LED?

Hi Joel 👋 do you start with charged caps in that system?

@joellagace1679

29 күн бұрын

Of course just like I did the first time, caps just simulate a series DC , feel free to use any trigger that is available instead of caps, Solar, Earth/water batteries etc...

Did you just save the world?

@joellagace1679

Ай бұрын

I guess the limits are your resources, I can't do much in a kitchen and a few wire clips :) But it gets the point across :)

@dSquared0162

Ай бұрын

@@joellagace1679 Waiting for the kits... 😁

@joellagace1679

Ай бұрын

More like the end of summer it takes like 6 weeks to get some of these parts ( the magnesium plates and conductive carbon. :( but its all in the works, It's just going to take some time. Also need to find plastic molds the size of about cupcakes.

@DBowling11

Ай бұрын

@@joellagace1679 I'm laughing about the cupcakes. My wife buys applesauce in these little plastic containers about the size of cupcakes. I have a stack of about a hundred because I use them for sorting small nuts, and screws.

The smallest part in this circuits seems to me the cables and the LED itself. I believe that the echo gets limited by this parts in the circuit. I have an idea how to test this theory. I would take your PEG cell you're using here. Then connect a 12v-car-battery or 12-lead acid-battery with the PEG cell in series with wires AWG 15 or bigger. And the load a 12v-car bulb with 5 Watts also with AWG 15 or even better, connect it directly. This way everything is bigger and the echo is eventually also bigger.

Very Interesting! I wasn't going to get into these power cells that you have been making, but this is so interesting that I am about to order all the Peg cell ingredients, I was also thinking about making them in Graphite cups and trying various centre electrodes.

@joellagace1679

Ай бұрын

Very interesting, Can't give you any guarantee of the various experimental outcomes you have in mind, But I am looking forward to hearing your results. Folks are having issues around the world finding the right PEG 3350 100% powder. I'm thinking of buying some bulk here in Canada and repacking it with my in the works PEG cell kits. If you look around some have been lucky enough to find the right mix. I'm still a little confused as to why the PEG is so widely available in dollar stores and corner stores even Walmart in big bulk yet everywhere else it does not even make it across your borders by mail in original packaging.

@joellagace1679

Ай бұрын

The folks over at Beyond Unity forums are working hard at trying to figure out what mix needs to be done if you can't find the right PEG to make alternative PEGs work as well. So far very promising. But i'm not there at the other end of the world so I can do little to contribute to that part of the research.

@joellagace1679

Ай бұрын

Yeah this cell here has a centre electrode its the copper in the black wire that is sticking out doing nothing. Saving it for future project that need transistor like bias and see how it reacts.

@marcelfiechter7436

29 күн бұрын

@@joellagace1679 I guess the content of relaxa is pure PEG 3350. I could buy this type of medicament also in the pharmacy. But there is a little bit of sodium chloride and other small amounts of ingredients. This could distort everything. I could order also pure PEG 3350 on the internet. But it's 3 times more expensive.

@joellagace1679

29 күн бұрын

Yeah 100%

I didn't think you will manage to do this that quick. But here it is. I'm not sure if I understood everything correct. I'm guessing in this setup you didn't precharge the capacitors to start with. There is 0.5v-1v on the cell in the off mode. The main point here is that you manage to charge the capacitors up to 6.05v without any power from outside. That's groundbreaking. And the capacitors are keeping this voltage permanently. The voltage of 6.05 and 0.5v of the cell is adding up I guess. And you connected the plus of the cell to the plus of the capacitor bank I guess. And it's changing the polarity when the LED is blinking. In this moment I guess you have around 10v on the load. This are approximately -5v on the cell and +6.05 on the capacitor bank that makes 11.05v on the load. Am I on the correct path?

@joellagace1679

Ай бұрын

Yeah more or less it's in that direction. I had to give it a trigger to start of course. But my point was it can be removed, In the other video I had no feedback and was pulsing it manually just to demonstrate the effect. But many got upset and thought it was scam.

@joellagace1679

Ай бұрын

HV has the knack to blow everything up even at low current. So my next idea since this seems to be interacting with electrostatic giving us a kind of cold energy flow. Because nothing heats up it might work well along side more advanced projects like Solid State Bedini, Don Smith. Kapagen etc...

@marcelfiechter7436

Ай бұрын

@@joellagace1679 Exactly I got the idea that this PEG cell would run very well with very high voltages. But this is something that scares me. I don't like more than 100v. Go with the Solid State Bedini. Combine this. I believe this will be a big step forward again. I get it more or less so fare. And one day I will see a way to do something with this. My knowledge in this area is not that big.

@marcelfiechter7436

Ай бұрын

@@joellagace1679 You did a good video on 01/12/2023 "Solid State Bedini Free Energy". This method seems quite simple. The biggest issue I have is the coil. Coils are very interesting but still quite complicate. Maybe the PEG cell can replace the coil? Then suddenly this Solid State Bedini would be in the reach of my knowledge.

testing

What happened? Where did you go? Did the Feds come visit you? 🙂

@olavp.4019

27 күн бұрын

Maybe he search Vacance, and a Vacuum Tube.... His big Air Coil must be checked. Hopefully Bey

@joellagace1679

27 күн бұрын

I think the "feds" have better things to do hehe than focus on me. A guy and his kitchen lol maybe if I gave out KFC secret lmao "the secret is dirty bird"

@Someone-A3

26 күн бұрын

​@@joellagace1679 😆