Can you guys do a test where lawrence is jumping with a camera on for like 20 minutes lmao

Efficient and very informative with cheeky humour, wish all the product videos were like this.

Beautifully awkward video. Awesome product!

Clear and concise; kept me smiling too, Thanks LL, you're a star.👍

Thumb up if you want that Silent Bob jump with camera again

Very clear and calm (no over-acting, no exaggerating) review. Luv it

I'm still using the V1 and couldn't be more satisfied with this little thing. Great product!

Absolutely beautiful product that works great with the Sony A7. The V3 and the new P.O.V. plate doesn't feel quite as secure as the standard V3 plate but seems to do it's job so far. This is a serious game changer for rock climbing in terrain where speed and camera safety are critical for capturing scenes, not losing the camera, and being efficient while belaying someone (of course getting their approval and locking them off). The POV kit will be used for the RX100 and GoPro.

Love Peak Design products. Bought the wrist strap the other day and now I just purchased the capture v3 clip.

Just purchased the Slide Lite for my XT-2, and its awesome!!!!!

Very helpful video. I am now Very pleased that I purchased the pro-pad in addition. Thank you.

Forget the capture, how much to hire this guy for parties!

Hope a V4 will come one day with the return of the tensioning screw of the V2 (which I own and which I am very happy with!), it's nearly essential for MTB carrying to avoid jiggling noise.

i liked the jumping part! xD

Peak Design Video Haha guys I am going to buy this now, but I love the way you present your humor :))))

Ohhh now I get it! And it works!!!

Great Video, Lawrence! Learned a lot, and was entertained mightily :)!!

Why not a d ring screw so tha we don't have to care about the tool ?

AMAZING !

Need to see more jumping with the pro pad.

great product, how about a left handed version??

Yay for Lawrence the Reference!

@peakdesignvideo

6 жыл бұрын

A real fan....

This looks freaking awesome

awesome tools

Can I put the Pro Pad on a backpack strap but in the same way you demonstrated for the waste belt? Perhaps then I can protect my precious compagnon leather bag from getting scratched from the capture? Obviously I just need to set the orientation of the bottom clip vertically to allow the lens to face down. Would that work?

Do you think I am able to use this with my GoPro and my scuba gear, backpack style? I will be rolling all over the place in the water, do you think it will keep my gopro in place and keep it from being lost?

How is your walking balance on longer hikes with the camera on your backpack?

Hi, from the video do you mean you can't release the camera with one hand when using pro pad?

does the 3 legged plate on brian fit this clip

i've bought capture v3. But i'ts nor easy to find position for capture in backpack. also in your video, the sigma lens (near lenshood) strikes again and again versus the metallic part

we don´t have peak design in Brazil! Come to us please.

There should be a way to get rid of the play between camera and clip. Something like after it's mounted, there's something that tightens to eliminate the play. It's just annoying cause I can hear the clip moving around when I walk. Think about implementing it for v4.

@peakdesignvideo

6 жыл бұрын

Hi there, the Plate Lock which performed this action was removed from Capture V2 for V3 as it was an underused and often misused (as a safety lock) feature. Additionally, inadvertent tightening of the Plate Lock also could make it difficult to insert or remove the plate from the clip.

Great tips and video. Just a question, if I have the plate of the Clutch Camera Hand Strap (its the square one), will it work with the Capture v3? Or do I have to buy the special plate for the Capture?

@peakdesignvideo

6 жыл бұрын

Hi there, the Standard Plate which is included with the Clutch is compatible with Capture V3, please see the following support.peakdesign.com/hc/article_attachments/360001746346/plate_compatibility_chart-01.jpg support.peakdesign.com/hc/en-us/articles/201291383-What-s-the-difference-between-Capture-s-plates-kits-

does an 'old' plate from v1 fit into the new v3 clip ?

Do you need the plate to use the clip

Hi I am searching for the compatibility of my Manfrotto MHXPRO-BHQ2 with 200PL with capture v3. I own Capture V3 from the kickstarter campaign. But few days ago I bought Manfrotto with 200PL plate, I am wondering whether your Manfrotto dual plate is compatible with MHXPRO-BHQ2 with 200PL plate. I have look at your wonderful chart but I still can’t figure out the compatibility. Please help me before I order your Manfrotto dual plate. Thank you very much.

@peakdesignvideo

6 жыл бұрын

Hi Nizar, The Dual Plate will be compatible with the Manfrotto MHXPRO-BHQ2 with 200PL Plate. Please refer to our support article at the following link support.peakdesign.com/hc/en-us/articles/202143695-Manfrotto-Tripod-Compatibility

Ok I bought the silver one. The capture v3... I also have the Field Pouch. Please please explain to me how to get the capture onto the field pouch. Do I need to take a knife and cut 5mm off each side? Please explain.

@peakdesignvideo

5 жыл бұрын

Hi Jac, you don't need to cut the hypalon, you can simply fold a little over from each side, please see the following photos. flic.kr/p/DmkgMq flic.kr/p/GxrXkn On the newer Field Pouches, we have reduced the width of the Capture attachment point.

do the hex head bolts work with previous versions? and if yes, are they available separately for purchase?

@peakdesignvideo

5 жыл бұрын

Hi Mark, they sure do work with Capture V2, please see the website, where you can pick them up www.peakdesign.com/collections/clips/products/bolt-pack it is a standard M5 pitch thread.

Capture V2 does work with the v3 plate of you know what you're doing I am using my old V2 with the new plates

@peakdesignvideo

6 жыл бұрын

It is possible to use the new V3 Standard Plate with the Capture V2 if you use the V3 Hex Bolts, but as the majority of users won't necessarily have this as an option, it is not something that we are actively messaging.

I’m using Capture V3 as well as Manfrotto BeFree Carbon SKU: MKBFRC4-BH the tripod has attached ball head with a plate 200LT-PLsupplied in the set. Will this dual plate compatible with my tripod as well as Capture V3? Please help

@virayudh

6 жыл бұрын

Reason I’m very confuse is due to my local dealer here said it won’t be compatible while on the PD website said it is compatible. Sadly local dealer isn’t happy to open the box to let me trial the compatibility.

It's a "Backapck"! Secret prototype product spotted at 11:28 ! :)

is it compatible on any adaptateur for tripod ? thank you

Is the new dual plate compatible with Manfrotto MT055XPRO3-3W?

@peakdesignvideo

6 жыл бұрын

As this Manfrotto Tripod is RC2 compatible, the new Dual Plate is natively compatible with this unit.

@novakkosanovic

6 жыл бұрын

Tnx :)

Need lens kit for mft

Can you use capture with clutch?

@peakdesignvideo

6 жыл бұрын

You certainly can, you just need to ensure that you consider which of the anchor locations you attach the clutch to the bottom of the camera so it doesn't interfere with the insertion of the Plate into the Clip.

No tripod screw on the bottom :-(

With a big DSLR it’s pretty much everywhere uncomfortable to carry it. It’s made for light cameras.

Lens Kit: why Not for m4/3…

@novakkosanovic

6 жыл бұрын

or fuji

you unmount the lens with power on, holy!

Can I handle this plate with any 3rd party tripod?

@peakdesignvideo

6 жыл бұрын

The Tripod Plate works with ARCA Compatible Tripods. Please see the website for a list of supported tripods and advice what to do if your tripod is not supported (plate stacking).

@graad085

6 жыл бұрын

Peak Design Video perfect, thank you!

Is it weird I watch these for the comedy?

3:06 to 3:16 gonna use that clip to pick chicks when they ask about my talents.

you are so cute. ㅋㅋㅋㅋㅋㅋㅋㅋ

Your prices are much too high. The prices sold on Kicker Starter should be what should be sold at retail. Also many of your bags sold on Kick Starter are resold on eBay. People don’t seem to want to keep them.