In this video I repair a computer power supply that came in dead with a popped fuse. NEVER WORK ON LIVE POWER SUPPLY. STAY SAFE.
Жүктеу.....
Пікірлер: 13
@colin5064 Жыл бұрын
Most helpful excellent video
@gloubiboulgazeblob Жыл бұрын
Hi, nice repair ! Question : I got a power supply which presents the same symptom (6.3A fuse explodes...). 1) in the primary stage) : - 4 pins rectifier : I tried to test it on circuit and ALL pins are short-circuit (multimeter beeps quickly as soon as I touch the pins). Is this normal in that test condition ? Can I test that without de-solder it ? - 3-pins regulator (sits next to rectifier, screwed in heatsinker as well) : again, not de-soldered, can I also test that for continuity ? I think it's in good shape, no beep, but I'm not sure how to test that properly, even de-soldered... 2) in second stage (between primary and secondary stages): - I can see a 2x4 pins IC whose surface is partially broken, I can see its guts (identification impossible)...
@brightsanchez-bk6ie2 ай бұрын
when I plugged in my 1985-1995 Windows xp home as soon as it went in it was ba boooyie
@colin5064 Жыл бұрын
Hi, the video shows you change two shorted mosfets but you appeared to change one or two resistors also is that correct? There was no commentary on this in the video.
@alwaysafix
Жыл бұрын
I only changed the fets and replaced the fuse, the rest of the circuit tested good.
@colin5064
Жыл бұрын
Hi thank you for the most kind reply,must have been some debris you were clearing from your work area l saw.Excellent informative video much appreciate thank you for sharing
@alwaysafix
Жыл бұрын
@@colin5064 You are very welcome, thanks for watching.
@user-se2pb5yx5p2 ай бұрын
Antec bp450p blown Symptoms: blown fuse, flown mosfet and diode. Replaced all. 5v on pson and 3.3v on vsb standy coming. Vsb seems faulty. Starting with the green connected to black, series lamp lights up. Thinking output is short. Any other ideas (I'm taking this slow)?
@alwaysafix
2 ай бұрын
Since the series lamp lights up your problem is on the primary side not the output. When the mosfet shorted it damaged other components. Check pinout on main control IC. Good Luck.
@colin5064 Жыл бұрын
what rating was the glass fuse you didn't show replacment
Пікірлер: 13
Most helpful excellent video
Hi, nice repair ! Question : I got a power supply which presents the same symptom (6.3A fuse explodes...). 1) in the primary stage) : - 4 pins rectifier : I tried to test it on circuit and ALL pins are short-circuit (multimeter beeps quickly as soon as I touch the pins). Is this normal in that test condition ? Can I test that without de-solder it ? - 3-pins regulator (sits next to rectifier, screwed in heatsinker as well) : again, not de-soldered, can I also test that for continuity ? I think it's in good shape, no beep, but I'm not sure how to test that properly, even de-soldered... 2) in second stage (between primary and secondary stages): - I can see a 2x4 pins IC whose surface is partially broken, I can see its guts (identification impossible)...
when I plugged in my 1985-1995 Windows xp home as soon as it went in it was ba boooyie
Hi, the video shows you change two shorted mosfets but you appeared to change one or two resistors also is that correct? There was no commentary on this in the video.
@alwaysafix
Жыл бұрын
I only changed the fets and replaced the fuse, the rest of the circuit tested good.
@colin5064
Жыл бұрын
Hi thank you for the most kind reply,must have been some debris you were clearing from your work area l saw.Excellent informative video much appreciate thank you for sharing
@alwaysafix
Жыл бұрын
@@colin5064 You are very welcome, thanks for watching.
Antec bp450p blown Symptoms: blown fuse, flown mosfet and diode. Replaced all. 5v on pson and 3.3v on vsb standy coming. Vsb seems faulty. Starting with the green connected to black, series lamp lights up. Thinking output is short. Any other ideas (I'm taking this slow)?
@alwaysafix
2 ай бұрын
Since the series lamp lights up your problem is on the primary side not the output. When the mosfet shorted it damaged other components. Check pinout on main control IC. Good Luck.
what rating was the glass fuse you didn't show replacment
@alwaysafix
Жыл бұрын
5Amp Fast Acting
@colin5064
Жыл бұрын
@@alwaysafix thank you most helpful
Your audio is very quiet😢