Patti The Free RXL - Pressure checking the engine. Vintage Polaris Triple snowmobile resurrection.

Автокөліктер мен көлік құралдары

The struggle with sealing! We pressure check the motor and we find leaks. Lots of leaks.
Want to support the channel? Go To Nutter's Speed Shop Patreon Page: / nuttersspeedshop
or
Send beer and pizza funds through Pay Pal to nuttersspeedshop@gmail.com. No questions about sleds will be answered by e-mail. Leave a comment. Comments help the channel, e-mails don't.
or
Want to send Farley dog treats or send something to Nutter's Speed Shop?
P.O. Box 241
Stacy Mn 55079
Shirts and stickers are here: nutters-speed-shop.myspreadsh...
Brass fuel tank pickup with screen for 1/4" fuel line. amzn.to/46d5k91
Battery I used for project Walnuts amzn.to/3rvxb5r
My favorite (almost) universal tether. Works on all vintage Polaris amzn.to/3LLn3gm
99502H 2RS bearings - oddball smaller bearings used in some Polaris skids. amzn.to/3D9yLfO
Rivnut tool we use in the shop: amzn.to/3H98pNp
The O-rings for Polaris TX carbs amzn.to/3wc25hG
Shoe Goo -- Fix your sled seat! amzn.to/3XAJfgc
Shake and Break! The Ultimate Philips impact driver! amzn.to/3CcJgyk
62052RS bearing I have been using. Cheap, but seem OK for my use: amzn.to/3h2ZimS
Wix 33001 1/4" Fuel Filter for sleds: amzn.to/3zs1x9A
Brass 3/4" hose barbs: amzn.to/3Fvrjh4
Spring Compressor - right size for sleds: amzn.to/3MU5Jo1
Really deep 12mm socket for above compressor: amzn.to/3uIDyjE
9/16 6 point socket, 1/4" drive: amzn.to/3EYDQcF
Mayhew Dominator Pry Bar set: QUALITY!!! amzn.to/3yvg0B6
Genuine Hella H4 headlight for wedge Indys: amzn.to/3LjQOmq
Insulation for belly pan near pipes: amzn.to/3DqyOEU
7PSI lever lock radiator cap for Vintage Polaris (large cap) amzn.to/3BhUjVN
1/4-20 flat nuts for vintage Polaris: amzn.to/3qGa18e
9mm hose clamp for fuel lines: amzn.to/3xBS51Q
Three Bond 12-11: amzn.to/3JVU4CM
Ultrasonic cleaning solution that I use: amzn.to/3scP7PX
Heavy Duty Voltage Regulator: amzn.to/3sY1m1W
LED light that fits TX and TXL: amzn.to/3Hcb2vEtage

Пікірлер: 9

  • @nuttersspeedshop
    @nuttersspeedshop2 ай бұрын

    Want to support the channel? Go To Nutter's Speed Shop Patreon Page: www.patreon.com/nuttersspeedshop

  • @NJP76
    @NJP76Ай бұрын

    Definitely purple. It's a Polaris thing. 😎

  • @javinplaski5028
    @javinplaski5028Ай бұрын

    If you need a mani I should have one

  • @kevinandres5053
    @kevinandres5053Ай бұрын

    Looks purple to me

  • @nuttersspeedshop

    @nuttersspeedshop

    Ай бұрын

    I'll have him read these!

  • @dirtyfacegeorge9938
    @dirtyfacegeorge9938Ай бұрын

    I got some rubber expansion plugs at NAPPA they work great,. How come you don't check with manifold installed?

  • @nuttersspeedshop

    @nuttersspeedshop

    Ай бұрын

    The point is to try to make sure it's sealed on the intake side. You don't want a leak at the carb boots, cranks seal or anywhere on the cases. A leak there will possibly make you burn down lean and also let dirt into the engine. If a crank seal goes bad it can let a lot of dirt into the PTO bearing.

  • @sledneck182
    @sledneck182Ай бұрын

    Where the heck is Dennis?

  • @nuttersspeedshop

    @nuttersspeedshop

    Ай бұрын

    He will be back next week.

Келесі