This would be sweet to do to an old radial arm saw, so you can control all of the up/down, feed in/out, bevel, etc. perhaps make the table able to move also. I’d love to just modify the one I have that can adjust the feed forward and back as I want to convert it into a water cooled rock saw someday.
@senjos48057 жыл бұрын
Oh man...this is so cool!! I wish I could do that with you and learn from you!!! Just great!!
@saekdareunzip
7 жыл бұрын
wow~ good man!! you can do it!! :)
@alibilal80716 жыл бұрын
Super idea ....
@karoma78982 жыл бұрын
I think the major drawback of a CNC circular saw is "is it worth it?", Cutting stock manually is much faster than setting up a cnc program, then fixing stock down, zeroing, and dealing with waste is more expensive time and money wise. A really smart move would be automating end stops and rails on a normal table saw, like in semi-automatic sheet metal bending machines, a worker pushes stock without measuring, the end stops move in the back to stop the worker in the correct place
@travelfoodbusinessbestheyyono
2 жыл бұрын
I think most of the value added is safety! but I agree with you it should be semi-auto automatic saw as well as lever stop and an auto clamping. so you can put the thickness of the material and the size of the cut and degree of the cut and just push to the end it will grab it and pass the cut and it is much safer saw!
@Abhisphukan2 жыл бұрын
that's great. Can you teach me, how to add circular saw as cutting tool in aspire or any CAD program ?
@SeungOhChoi7 жыл бұрын
Gooooood!!! It would be better to add a limit switch on the circular saw for your safety.
@saekdareunzip
7 жыл бұрын
안녕하세요.. 한국분이신가요? 좋은 조언 감사드립니다.. ^^ cnc saw 버젼은 짤막학게 3편정도 올리고 라우터버젼으로 넘어갈겁니다. ^^ 초대박의 cnc 검색하면 제가 올려놓은 강좌가 꽤 됩니다. 감사합니다. ^^
@SeungOhChoi
7 жыл бұрын
하하하... 레니초이입니다.
@saekdareunzip
7 жыл бұрын
ㅋㅋ wow good man... nice guy~~ have a nice day~~
@matusondrus89876 жыл бұрын
Great job !!! What kind of stepping motor you using for this project? Thank you.
@saekdareunzip
6 жыл бұрын
nema23 stepper motor :)
@priyankaraalvis25385 жыл бұрын
Good
@altemiogdealmeida32474 жыл бұрын
👏👏👏
@phillipemmons37144 жыл бұрын
Damn whippersnappers. I was born 50 years too late
@russellmcallister68303 жыл бұрын
Waw just waw!
@russellmcallister6830
3 жыл бұрын
Do you have a parts list by any chance
@rainflower37007 жыл бұрын
초대박님 이신가요?
@saekdareunzip
7 жыл бұрын
헛.. 누구세요... ^^
@rainflower3700
7 жыл бұрын
Dearfamily 그냥 우드워커 회원입니다ㅎ
@saekdareunzip
7 жыл бұрын
아.. 예... ㅎㅎ 우드워커에는 항상 상세설명과 함께 올리고있죠.. ^^ 영어를 할줄알면 좋은데, 외국독자들도 그냥 영상만 봐도 이해하리라 믿고... ^^
Пікірлер: 25
This would be sweet to do to an old radial arm saw, so you can control all of the up/down, feed in/out, bevel, etc. perhaps make the table able to move also. I’d love to just modify the one I have that can adjust the feed forward and back as I want to convert it into a water cooled rock saw someday.
Oh man...this is so cool!! I wish I could do that with you and learn from you!!! Just great!!
@saekdareunzip
7 жыл бұрын
wow~ good man!! you can do it!! :)
Super idea ....
I think the major drawback of a CNC circular saw is "is it worth it?", Cutting stock manually is much faster than setting up a cnc program, then fixing stock down, zeroing, and dealing with waste is more expensive time and money wise. A really smart move would be automating end stops and rails on a normal table saw, like in semi-automatic sheet metal bending machines, a worker pushes stock without measuring, the end stops move in the back to stop the worker in the correct place
@travelfoodbusinessbestheyyono
2 жыл бұрын
I think most of the value added is safety! but I agree with you it should be semi-auto automatic saw as well as lever stop and an auto clamping. so you can put the thickness of the material and the size of the cut and degree of the cut and just push to the end it will grab it and pass the cut and it is much safer saw!
that's great. Can you teach me, how to add circular saw as cutting tool in aspire or any CAD program ?
Gooooood!!! It would be better to add a limit switch on the circular saw for your safety.
@saekdareunzip
7 жыл бұрын
안녕하세요.. 한국분이신가요? 좋은 조언 감사드립니다.. ^^ cnc saw 버젼은 짤막학게 3편정도 올리고 라우터버젼으로 넘어갈겁니다. ^^ 초대박의 cnc 검색하면 제가 올려놓은 강좌가 꽤 됩니다. 감사합니다. ^^
@SeungOhChoi
7 жыл бұрын
하하하... 레니초이입니다.
@saekdareunzip
7 жыл бұрын
ㅋㅋ wow good man... nice guy~~ have a nice day~~
Great job !!! What kind of stepping motor you using for this project? Thank you.
@saekdareunzip
6 жыл бұрын
nema23 stepper motor :)
Good
👏👏👏
Damn whippersnappers. I was born 50 years too late
Waw just waw!
@russellmcallister6830
3 жыл бұрын
Do you have a parts list by any chance
초대박님 이신가요?
@saekdareunzip
7 жыл бұрын
헛.. 누구세요... ^^
@rainflower3700
7 жыл бұрын
Dearfamily 그냥 우드워커 회원입니다ㅎ
@saekdareunzip
7 жыл бұрын
아.. 예... ㅎㅎ 우드워커에는 항상 상세설명과 함께 올리고있죠.. ^^ 영어를 할줄알면 좋은데, 외국독자들도 그냥 영상만 봐도 이해하리라 믿고... ^^
why...???
@wiggum2009
5 жыл бұрын
Cool but My thoughts exactly 😊