A torch will ruin molds. A heat gun doesn't get that hot, about 200° - much less than the oven, molds are designed to work in (up to about 450°). They're used for baking. A torch gets much hotter than that. Also, alcohol is bad for silicone molds, sorry to say. It will dry the mold out pretty quickly. The safest would be blowing through a straw. Next, would be a lighter, a heat gun, alcohol, then... that's all. A torch isn't even on the list. Also, a quick spray of mold release makes demolding easier and helps your molds stay shiny and last longer.

@EjoysArtSpace29

2 жыл бұрын

Thank you so much for these important information Miley. Will pin your comment so everyone can see 😊👍🏻

@everythingonmychannel23

2 жыл бұрын

😘

@prempremglamourz1

2 жыл бұрын

@ Miley onDisney Thanks for this information Miley.

Very very gorgeous!!!

@EjoysArtSpace29

Жыл бұрын

Thank you 🎀 😊

Brilliant and fantastic mam. U showed the process so well. Outstanding. Please keep posting more of such videos.

@EjoysArtSpace29

Жыл бұрын

Thank you 😊 🎀 I've uploaded my other souvenir designs. Please check it out on my channel 🦋

Thanks dear for this

@EjoysArtSpace29

Жыл бұрын

Welcome

Please visit and SUBSCRIBE to my very close friend's channel: kzread.info Thank you fellow crafters ❤️🌹

ang lupet.. ang ganda ng finish product.

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊

Good job🥰👍💐

@EjoysArtSpace29

Жыл бұрын

Thank you 😊

Thanks for sharing

@EjoysArtSpace29

2 жыл бұрын

welcome :) thank you for watching

WOW! Those turned out absolutely beautiful! Great job!

@EjoysArtSpace29

2 жыл бұрын

Thank you so much Miley as always 😊❤️

Another beautiful job!

@EjoysArtSpace29

2 жыл бұрын

Thank you as always Linda. Appreciated :)

So beautiful!

@EjoysArtSpace29

Жыл бұрын

Thank you 🎀 😊

These are truly a work of art, absolutely gorgeous!!!

@EjoysArtSpace29

2 жыл бұрын

thank you :)

Gorgeous as always

@EjoysArtSpace29

2 жыл бұрын

Thank you Nixon 😊

Pura delicadeza 💕

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊

AWWWWWW YUNG "IM HAPPIER THAN BEFORE" JHJKXCHKLSDCKL :) GO BESH

@EjoysArtSpace29

2 жыл бұрын

Pagod pero masaya besh 😊 unlike sa work ntin now, pagod ka na nga, stressed ka pa mentally, physically at emotionally.

Omg they are beautiful!!! You did such an amazing job!!! I’m

@EjoysArtSpace29

2 жыл бұрын

thank you :)

Amazing! Im learning from you! Thanks!

@EjoysArtSpace29

2 жыл бұрын

I'm glad of help. Thank you 😊

It’s beautiful 😍

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊

Seriously thinking about trying this!! 🥰🥰🥰🙌

@EjoysArtSpace29

Жыл бұрын

You need to 😊even once. Happy creating!

Wow, the time you had in these, but the outcome is so beautiful 😍

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊

I subscribed. Hey Doming Queen 👑- have a happy Saturday and a great weekend ❤️❤️❤️❤️

@EjoysArtSpace29

2 жыл бұрын

Thank you so much for supporting me 😊

Wala aq masabi kundi 😲😲😲.. Napansin ko lng palaki n Community mo congrats po 😘😍.. Stay humble and generous as you share your ideas even the slightest but important on making resin projects,😊😊😊... Lets keep growing 😁😁😁

@EjoysArtSpace29

2 жыл бұрын

thank you sis :)

Beautiful 😍you are super talented ❤️

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊

Thank You for sharing your tips about using isopropyl alcohol. Ang ganda po ng pagkakagawa. Elegante!

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊

Thank you very much. You inspired me a lot to do resin work. I decided to open the shop on Instagram and Facebook and always visit your channel to see techniques I can apply. Many many thanks from my heart. ❤ Once you travel to Thailand, let me know if I can take care of you here. 😘😍

@EjoysArtSpace29

2 жыл бұрын

Thank you so much :) wish you good luck to your business ❤ Thailand is a beautiful country and I personally wanted to try the food there someday. Will surely let you know if I ever travel there. 😊

it's wonderful; i'm hoping you get more clients ate🎉❤️

@EjoysArtSpace29

2 жыл бұрын

Salamat Ian 😊❤️

I hope they understand all of the detailed work this took and additionally buy you a Cricut Maker III.

@EjoysArtSpace29

2 жыл бұрын

Thank you miley :) am hoping too

galing talagaa ateee!! 😍❤️

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊

GRABEH BESH YUNG QUALITY CONTROL, PULIDONG PULIDOOOO

@EjoysArtSpace29

2 жыл бұрын

Thank you besh 😊 kailangan eh, pang - souvenirs itu 😁

🤩🤩🤩🤩absolutely gorgeous🤩🤩🤩🤩wow❣️Thank you for teaching this. I subscribed a few videos ago😊cheers🥂Ontario Canada🎈stay well stay safe😷

@EjoysArtSpace29

2 жыл бұрын

thank you so much from Philippines :)

Don't see how I missed part 2 when I got a notification for this one. Anyway, your videos are so calming and will subscribe to your friend's channel as well.

@EjoysArtSpace29

2 жыл бұрын

Thank you so much Jaye 😊

Came out beautifully. But did you figure out how to make the labels. Or show up so much?? You can see the outline.

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊 best way to make the labels is using cutting machine to make decals but I don't have it since it's very extensive

GRAAAAABEEEEEH SDBBDHDHSHS 😭😭😭😭😭😭😭😭😭 SOBRANG SALAMAT SA PAGFEATURE 😭

@EjoysArtSpace29

2 жыл бұрын

Welcome besh. Sana makatulong kahit pano 😊

Going to follow friend too

@EjoysArtSpace29

Жыл бұрын

Thank you 🎀 😊

You’re really talented ! I love your work - do you have an idea of when you will begin shipping internationally ? ☺️

@EjoysArtSpace29

2 жыл бұрын

Thank you :) I'll update here if ever..

You are a very hard working lady Ejoy and I’m happy for you because you are happy. I wish I could do videos of my work as well just like you. You always show the pros and cons of your projects which give piece of mind if someone like me who is a beginner experience the issues. Where are you based if I may ask? Thanks for sharing 👍🏽

@EjoysArtSpace29

2 жыл бұрын

Thank you so much Prem :) hoping too see your creations too 😊 I'm based in Philippines :)

@prempremglamourz1

2 жыл бұрын

@@EjoysArtSpace29 Thanks but don’t know how to start 😀.

@EjoysArtSpace29

2 жыл бұрын

@@prempremglamourz1 believe me or not, when filming most of my videos, I just put my phone (yes, am only using my phone for filming 😊) on top of a packing tape, the thick one. Sometimes, im using my coasters, 3 of them, piled up. Put my phone on top of it, focus on whatever am doing and press record. If i want different angles, i just put it wherever possible 😂 like my small white drawer, small books, sometimes, just on the table, especially when I'm designing and wanted to focus on the letters. That's it 😊

@prempremglamourz1

2 жыл бұрын

@@EjoysArtSpace29 Wow 😮, that is unbelievable, you are so genius. I was still looking to get a tripod stand with light 💡 and trying to get money and buy a camera 🎥 for recording but you surprised me and save me money by your reply. But I don’t like long videos and I’m don’t know how to edit as well which is why I was looking on KZread channel and they are mentioning getting this camera or that stand with light. You are too good and open mind person. Thank you very much for all your informations. I wish to see you in person and give you a big hug 🤗.

@EjoysArtSpace29

2 жыл бұрын

@@prempremglamourz1 I've also got tripod and some clip on led light with camera handle, but I really prefer the angle when I just put my phone on a packing tape or piled up coasters 😁 Go get those stuffs if it'll make your life easier 😊 i wish you good luck Prem and thank you so much for always being here and supporting me. Hug you back❤️

OH MY GEEEEEEEEEH 😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭😭

@EjoysArtSpace29

2 жыл бұрын

Ano ba yan iyakin 😂🤣

Wonderful..! Where do you sell your products, not this one, but in general.. you have some online store or ?

@EjoysArtSpace29

2 жыл бұрын

mainly fb marketplace and my fb ppage

SALAMAT BEEEEEESSSSSSH 😭😭😭😭😭😭😭 SNSNSNSNSNSJSJDJD

@EjoysArtSpace29

2 жыл бұрын

Welcome besh 😊 alam ko nmang magaling ka talga. Kailangan lang ma-recognized 😊 bsta ituloy-tuloy mo lang besh. Wag sukuan.

beautiful work! Congratulations! how many cm is the mold?

@EjoysArtSpace29

Жыл бұрын

Thank you 😊 it's 4' diameter

@macusf9758

Жыл бұрын

@@EjoysArtSpace29 thank you! 😘

Mine are not coming out shining, I think is the mold which I purchase in Amazon. Can you recommend one for me? thanks

@EjoysArtSpace29

Жыл бұрын

Buy the 3-cavity Silicon mold for baking

Amazing!can I know, How do you make the texts?

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊here's the tutorial kzread.info/dash/bejne/iYagxNKThtffY5c.html

Que maravilloso, por fin un tutorial serio sin musica estúpida y bailaderas absurdas estoy fascinada

@EjoysArtSpace29

Жыл бұрын

Thank you 😊

I so loved it ❤️❤️.. Your work is so neat n clean. Do you ship to India ??

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊 I regret to tell you that I don't ship internationally yet

@butterfly21vanessa90

2 жыл бұрын

@@EjoysArtSpace29 ❤️.. It will be great from u if u do so ❤️

@EjoysArtSpace29

2 жыл бұрын

@@butterfly21vanessa90 it's actually very expensive on my part...apologies

Usually how much po Ang cost nito if benta sa market? I want an idea

How to get the liquid silicone you put in the molding?

@EjoysArtSpace29

2 жыл бұрын

It will harden and you leave it there

Hello,wonder ful job,I am a fan of resin and l wovld like to know what type of paper do you print the names to apply them later to the resin ,The al the moment the cricut is out of my budget,

@magdalinecreations

2 жыл бұрын

I think she mention in her upload of her second episode my dear😊

@EjoysArtSpace29

2 жыл бұрын

It's Transparent Vinyl Sticker Sheet 😊

@EjoysArtSpace29

2 жыл бұрын

Thank you Magdaline 😊

@sorkundeful

2 жыл бұрын

Hola d nuevo ,siento ser tan permanente,pero estoy mirando por Internet y no sé exactamente q papel pedir,me podrías decir por favor donde lo adquieres,me harías un gran favor,muchas gracias

@sorkundeful

2 жыл бұрын

Quise decir pelma

I m having doubt.. Can moulds be dried if we left it at room temperature?.. Ya then heat gun is must for drying? 👀 How u printed the info on moulds.. Pls let me know! ❤👀

@EjoysArtSpace29

2 жыл бұрын

Yes they will cure even on room temperature. Heatgun is basically for the bubbles, not fkr drying. Please visit my channel fpr the Part 1 of making these souvenirs. It shows the layout and printing process. Thank you 😊

Hi! May I ask how much is your SRP for each coaster? Thanks for the reply

@EjoysArtSpace29

2 жыл бұрын

hi. Php150 per piece

Super ganda po!! Magkano niyo po sinesell yung ganyan maramihan?

@EjoysArtSpace29

2 жыл бұрын

Thank you 😊 Php130 per piece if bulk order of 50pcs up

Where did you get your molds

@EjoysArtSpace29

2 жыл бұрын

Please check the video description. Thank you 😊

Is this step more better result than when u do doming?

@EjoysArtSpace29

2 жыл бұрын

Yes.

@shichochino

2 жыл бұрын

@@EjoysArtSpace29 just 1 more question, my mica powder has glitter shine in it and it sinks at the bottom. So upper park looks prettier. Does yours sinks at the bottom?

@EjoysArtSpace29

2 жыл бұрын

@@shichochino yes. What you need to do is let the resin become thicker before your pour it on your mold so the glitters will not sink

@shichochino

2 жыл бұрын

@@EjoysArtSpace29 awesome! Thank u so much!💙💙

@EjoysArtSpace29

2 жыл бұрын

@@shichochino welcome. Good luck

How long did it take to make 50 and with how many molds?? My daughter wants me to make 250!!

@kindredcelebrations

2 жыл бұрын

😮 I don't know the answer, but good luck!!!

@EjoysArtSpace29

2 жыл бұрын

I replied to your comment on fb page 😊

@EjoysArtSpace29

2 жыл бұрын

@@kindredcelebrations I completely understand. 250pcs. is no joke

@kindredcelebrations

2 жыл бұрын

@@EjoysArtSpace29 what's your FB? I'm also curious about the answer!

@EjoysArtSpace29

2 жыл бұрын

@@kindredcelebrations last order I've got for this is 80pcs. I used 4 sets of 3-cavity Silicon cake mold. I finished 80pcs. in 3 weeks

Hi po. Where did you buy the molds po?

@EjoysArtSpace29

Жыл бұрын

Shopee

Hello po.. Paano po gawin yung letter keychain na parang baliktad po ang mold?? hehehe. meron kasi ako nakita sa tiktok hehe.

@EjoysArtSpace29

2 жыл бұрын

Hello. Mauuna po ilalagay ung designs ksi po ung ilalim ang magiging harapan kapag dinemold na.

@me_nikai

2 жыл бұрын

ay ganun po. pwde po gawa kayu nun ng video? hehehehe. 😬🤗

How much per piece

😭😭😭😭😭

@EjoysArtSpace29

2 жыл бұрын

😂😂😂😂😂

Y porque imprimes las etiquetas al revés?🤔

@EjoysArtSpace29

Жыл бұрын

Because it put it on backward facing mold

Anong size ng mold mo sis, shoplink pls 😊

@EjoysArtSpace29

2 жыл бұрын

4' diameter

In 200g how many resin arts ang magagawa?

@mariavanessasarzona3112

Жыл бұрын

In 200g How many resin arts will make?

@EjoysArtSpace29

Жыл бұрын

Depende po sa gagawin nyo. Iba-iba po kasi ang shape at size ng mga Silicon molds

Are u from india

@EjoysArtSpace29

2 жыл бұрын

Philippines 😊

😭😭😭😭😭😭😭😭😭😭😭

@EjoysArtSpace29

2 жыл бұрын

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

How can we place orders to u?

@EjoysArtSpace29

2 жыл бұрын

I regret to tell you that I don't ship internationally yet.

@shareenahm

2 жыл бұрын

Oh ok . May i know in which country are you in?

@EjoysArtSpace29

2 жыл бұрын

@@shareenahm Philippines 😊

Stickers making shop instagram account??

@EjoysArtSpace29

2 жыл бұрын

Nope. Sorry

Hi! Where did you get that kind of mold? I want that too! 😁🤗

@EjoysArtSpace29

Жыл бұрын

Hi. Shopee. Just search for 6-cavity Silicon mold

@EjoysArtSpace29

Жыл бұрын

You can also find them in Amazon or Ali Express.

@TinaCruz1892

Жыл бұрын

@@EjoysArtSpace29 thankyou!😘