Hey, after looking for many videos that show exactly how to configure this controller, your video is just what I was looking for. Thank you very much !!!!!

Thumbs up. I was looking to verify that you need to land the copter to trim, and you answer the question right on.

@RCEscape

7 жыл бұрын

thanks man :)

Im just getting into the hobby thanks for the video definitely helped me

Fantastic review! That transmitter looks like the transmitter for my Phantom 3 advanced, including the buttons on the back. Too bad it doesn't have a place for a plugin module like the 4in1, but for the price, it's outstanding. Thanks for taking the time to go over the whole setup!

@RCEscape

7 жыл бұрын

Thanks for checking it out :)

Thnx for a detailed one.

thanks for the video it helped me a lot

Great review!! Will check out part 2 :)

@RCEscape

7 жыл бұрын

Thanks Alan :)

Great topic, thanks👍

I just ordered this radio I plan on using it for a small tank chassis I hope it can be configured for both left and right throttles

Very nice video

Thanks for your reply

Great review. Many thanks. ...

@RCEscape

4 жыл бұрын

Glad it was helpful!

Nice looking radio 👍. Dod.

@RCEscape

7 жыл бұрын

Dod Rc Thanks buddy :)

Thanks! very Informative.“

@RCEscape

7 жыл бұрын

Thanks Pappy :)

great video , can you please tell me if you can use the back switches as channels ?

I have a i6s 10ch TX but the receiver is 6ch. I want to use a retractable landing gear and 2Axis Gimbal in my quad, should i do all these controls with 6ch receiver or should i upgrade my Rx with 10ch?

What if I want to change the comoany logo and other settings on LCD to use for one of my project. How will I do that?

great job

@RCEscape

7 жыл бұрын

Artur Skrzypczyk Thank you very much :)

Thanks. I want to make a remote controlled puppet and have a plethora of channels to work with. This seems to be the one . Basically a puppet riding a tricycle so I want tricycle control and puppet control - Tricycle throttle - Tricycle steering - puppet eyes left/right - puppet eyes up/down (upgrade) - puppet LED eyes on/off (upgrade) - camera eyes on/off (upgrade) - puppet neck left/right - puppet neck up/down. (upgrade) - puppet mouth open/close

Very good. This radio (FS-i6S) is compatible with tiny whoop as the Eachine e013? Thankful.

The RX voltage will be the boards 5v displayed and will remain the same whats the use of that please?

Hi! What is the problem with the spring throttle? Can I use this radio with whoops without making any hardware modification?

what is the difference between radio failsafe and what we set on the flight controller as failsafe?

Fs i6s supports s-bus, i-bus, ppm, pwm, c-ppm or not? Because i want to buy pixhawk flight controller & it works on c-ppm and s bus...

hi buddy how you done i have same this radio FS 10ch i6s white but can you tell how can adjust the alarm on my battery 3s when my 3s is weak the alarm is work she needs adjust from RX settings high volteg.6.0 alarm.4.2 low.4.0 if you know tell me how thx pal nice video

Thanks for your review. However, one thing I find missing from almost all reviews, is compatibility. Correct me if I'm wrong, but I believe this receiver works on the inverted signal, so is not compatible with none inverted FC. I bought a couple of F3 and F4 FC, only to find them not compatible with my receivers, so now I have ordered this one. Hope future reviews will take this into account.

@brandonmoon6563

4 жыл бұрын

In never had a problem with receiver on my FlySky F3 or F4

really like your reviews, always very informative! I'd like to make the step up from toy to hobby grade quadcopters, but I'm a bit intimidated it seems to be a very steep learning curve ? all the terms, abreviations software, hardware ? did you just jump in & learn while you go? hope you don't mind the question? have a good weekend!

@RCEscape

7 жыл бұрын

Thanks :) I have also just recently jumped into hobby grade quads from the toy grade rtf to the hobby grade bnf, pnp and arf quads and it does have a learning curve but it is far more rewarding :)

does it have a heli program?

Great info. New to all this. Can I connect to Mac and use simulators so that I can start by practicing without damaging quad or persons?

@RCEscape

6 жыл бұрын

I'm sure you can. there are lots of videos on youtube showing how.

How do i now what drones i can controll with this controller? I have the tarantula x6? will it work?

@alessandroammenti2384

7 жыл бұрын

Oliver Ya boii no

Thanku sir

Thanks for great video. Do you know why when I go to sticks adjust I can't return to the other screen?. I have to power off.

@RCEscape

6 жыл бұрын

Mine does the same.

DO THIS TRANSMITTER WORKS ON HELI LIKE THE BLADE CX 2 0R 3

I finished building my first racing drone. I took it out for a test flight an spun in the air like a top. I switch the blades around and then it just flipped over any ideas on what im doing wrong

@RCEscape

6 жыл бұрын

you either need to check all of your props and make sure they are in the correct way and you need to check to see if your flight controller has the correct board alignment.

I recently purchased the lanchi bluebired 80mm(brushed) that you reviewed (great review btw). Im curious to kno if it will bind to the Flysky I6S. I kno it binds to the 6 and 6X. But the I6S does not have backward compatibility to still bind with AFHDS. Im aware that the bluebird is AFHDS 2A and that it should bind with no issues. Ive just been seeing issues on line as of late and was curious if you had any info or have already tried it. Thx as always...

@RCEscape

6 жыл бұрын

Thanks :) It should bind since it is afhds2a :) I now have it bound to my jumper remote and it is awesome :)👍👍👍

i have every thang done with drone and cleanflight. every thang works.i got the hglrc 22o, batman drone.i cantest the motors every thang in order. how in the hell i start the motors to fly?please let me know thank you.

@RCEscape

5 жыл бұрын

have you assigned switches for modes?

Good imfomative video.Can I use for ground rc model like truck n other rc ground model?thank u

@RCEscape

4 жыл бұрын

I haven't tried but I don't see why not if you use their receiver :)

Was considering it till I saw how it trims how awkward. I like to trim as I fly.

HI MEN.... AM THINKING ABOUT THIS RADIO OR THE SIMPLE ONE (THE BLACK) WITH OUT TOUCH SCREEN..... WHICH ONE DO YOU PREFER THIS ONE OR THE Flysky Fs I6 Radio .... THANKS MEN ... YOU ARE THE BEST

@RCEscape

6 жыл бұрын

they are both good but the fsi6 has afhds and afhds 2A

same FS-i6X just tactil in plus

Trim without physical switches is very hard to adjust while one need to keep the Quad flying steady. Looks like the FS-i6S only support AFHDS 2A and is not compatible with the older AFHDS, correct?

@RCEscape

7 жыл бұрын

abghere Yes, you will have to land it and trim it and see if it is level. Imagine fixed wings :0 Yes, this transmitter does not have a switch for afhds and is fixed on afhds2a.

@adrtandaju

6 жыл бұрын

whitch gimbal the most smooth when in use? I6 or I6s??

How range with et115 rx2a version??

@RCEscape

6 жыл бұрын

Korean Dronian I don’t have a rx2a receiver to test...sorry.

I have the FS-i6X and the FS-T6 and like them so much I sold my brand new Taranis to my mate. lots of differerent Recievers from 3chan ones I use in my cars to the bigger ones I use in quads and they sold everywhere and are real cheap and the transmitters have all the features I need plus they are cheap too, i'm not worried about putting a FlySky transmitter on the ground or scratching it but i had to be so careful with my Taranis it had me worried all the time. So I love FlySky and I know my way around the menus well so might have a look at this new one. I might have missed it but is this compatible with both AFHDS and AFHDS 2A ?

@RCEscape

7 жыл бұрын

I do not nave any afhds receivers to test but the product is only afhds 2a and there is not a switch like the fs i6 transmitter.

@backyardbasher

7 жыл бұрын

Ahh okay thank you that is good to know, I just watched your video of the king kong tiny 7 and bought one thinking i could use it with my FS-T6 then realised the RX in the tiny is 2A and my FS-T6 is 2 only, so I'm really glad I have the i6X :D

Hi, is this a good radio in your opinion?

@RCEscape

5 жыл бұрын

Its good if you are a flysky person. I've not used it since now I have the jumper remotes and I am mostly frsky.

whitch gimbal the most smooth when in use? I6 or I6s??

@RCEscape

6 жыл бұрын

they are both about the same

@adrtandaju

6 жыл бұрын

ok.. thankyou for info,,, :D

Hi ..can you use one on a tamiya truck and how please thanks

@RCEscape

3 жыл бұрын

kzread.info/dash/bejne/aqekuJutlbK8hMo.html use a flysky receiver.

plz can u make a video on aileon mixing with this transmitter. there is no video on this on entire youtube

@RCEscape

7 жыл бұрын

kzread.info?search_query=aileron+rudder+mixing

Oooff, that price nearly doubled on Gearbest

Is it possible connecting r9m to the i6s like the i6x.

@RCEscape

3 жыл бұрын

These are flysky protocol and does not have the frsky protocol built into them.

@oussamasmaini7297

3 жыл бұрын

@@RCEscape i know. There's people doing that

I can't find the RX Bind option anyone else have the same? I can't connect it to cleanflight or betaflight either

@___echo___

6 жыл бұрын

nvm they moved it to the "system" menu part

How many mix can you add? Only one mix?

@deadstickfpv8115

5 жыл бұрын

1988dirk 4 mixes

Sir can you please tell me its maximum safe range in km...? please.......

@laranjiinha77

5 жыл бұрын

it sucks. mine does 80 meters before it drops signal. i am very disapointed with this tx.

which one is better

@RCEscape

6 жыл бұрын

personally, I like the old one.

can I do aileon mixing with this transmitter for rc planes

@RCEscape

7 жыл бұрын

yup

@siogana

6 жыл бұрын

how do we do this, can you tell us ?

If you are accustomed to modes 1 and 3 of the control sticks, here you have presented (step by step) a way to swap the gimbals for the FS-i6S transmitter: kzread.info/dash/bejne/aYN1sM2vYdXXkbg.html

You sell...?

This would be a great radio if it had proper trims. You want to dynamically trim while you're flying an airplane and that is not possible so it is a useless radio for planes

is i6s better or i6x for drones and rc planes both plz answer I am in confusion

@RCEscape

7 жыл бұрын

Universal Video I don't have a i6x to compare...

Why FS i6s is not connecting with FS R6B receiver?

@RCEscape

4 ай бұрын

protocols are not the same. AFHDS vs AFHDS2A

@yashnivalkar1131

4 ай бұрын

@@RCEscape whats the solution ? New receiver? Please suggest 6ch receiver compatibile I am not from electronics background just a guy who loves RC 🙃🙃

@RCEscape

4 ай бұрын

@@yashnivalkar1131 receivers are cheaper than the transmitters. www.google.com/search?q=afhds2a+receivers&rlz=1C1CHBF_enUS846US846&oq=afhds2a+receivers&gs_lcrp=EgZjaHJvbWUyBggAEEUYOTIKCAEQABgKGBYYHjINCAIQABiGAxiABBiKBTINCAMQABiGAxiABBiKBTINCAQQABiGAxiABBiKBTINCAUQABiGAxiABBiKBTINCAYQABiGAxiABBiKBdIBCTc5NjFqMGoxNagCCLACAQ&sourceid=chrome&ie=UTF-8

that goes with x6B?

@RCEscape

4 жыл бұрын

does it use afhds2a protocol?

@florinnegoita8846

4 жыл бұрын

ja

Your video is not even a month old but the price already jumped 42% from $47 in your description to $67 ???

@RCEscape

7 жыл бұрын

did it really? that sucks!!!

@pauls5745

6 жыл бұрын

yeah on GB but look around, maybe banggood has it for less. btw GB has the older FS I6 on sale i saw for $34. because FlySky rather you get the S or Xb now.

Excellent video - Big thumbs up !!! Visit us

@RCEscape

7 жыл бұрын

Thanks feri :)

Too long man...

No trim on the fly- No DEAL! crash... or be so good at first maden settings that you correct after land! You cant set perfect trims on like wings flyer.. need your sliders trims:>(.. its a no deal for me! Kiss- keep it simple stupid! ..Trims please.

This video is not informative for a beginner. Voltages, timers for what? Take it out of the box to fly a quadcopter. This is what you do AND WHY!!!!!!!!!!!!!!!!!!!! assigning switched WTF what are you talking about> Modes- for what? How about I drive over this with my car?

@BadToTheLastBone

5 жыл бұрын

Mine is coming in a couple of days. Did you find a good guide for setting it up and using it for the first time? If I find anything useful I'll post it in this message thread.

@Twhyrone

5 жыл бұрын

Did you find one? I'm just starting this and I'm completely lost. I built the quad and now I have no idea how to bind it. I got the new one from New Bee Drone