Update: The next day, Cindy and I went to town specifically for the water stop to complete the job. I could have waited a week for nicer weather, but I didn't wand it left unfinished one more day so when we got home, I got the tin cut and installed. The job is now 100% done for the year with only minor cosmetic issues to deal with in the Spring. Here is the Siding playlist: kzread.info/dash/bejne/gouIra-MgpzJnaw.html I have drywalling and a temporary wall to install on the inside and need to finish pulling the main electrical wire and hook up the electricals at the box -- a good deal of work, but I am not pressured by the weather and can work a longer, more comfortable day now. I will be splitting that work between the addition, the machine shed, and the greenhouse in the coming month or two, including plumbing the shed to install the urinal and sink, and installing the compressor and running the air lines. A lot to see so make sure you subscribe and click on that update bell and chose to receive them all!

@lornabartlett2744

3 жыл бұрын

Planet Mojo you're so very well-organized thank you and these videos are a pleasure to watch, it's my pleasure to tell you thank you and all the very best to your family this time in America happy joyous Christmas to all and the animals too, from my home to your home.🇨🇦💝

@PlanetMojo

3 жыл бұрын

@@lornabartlett2744 Thank you Lorna! -- and a Merry Christmas to you and yours as well!

You made that look simple. Nicely done.

@PlanetMojo

3 жыл бұрын

Thank you Jeanne -- tin is not my forte, but it came out pretty good if you don't count the tin that was sized incorrectly. Glad to be done with it and be able to move on to other things 😊

don't need so much caulking you shouldn't need to caulk where you should have an s clip also screws look nicer on the back of the cap and should lock in tight with the s clip and the safetys on both sides of the drip edge but other wise great work of that quick square

@PlanetMojo

2 жыл бұрын

Not exactly sure what all of that means, but thanks 😊

Where did you get those cutting and bending skills very nice i need you on my next install 😂

@PlanetMojo

5 ай бұрын

Thank you Rebel, I installed windows way back when, and they had aluminum trim. I'm pretty rusty now, but I can get it if I take the time 😊

Nice video! I'm also building a parapet. I'm curious, where did you get your caps?

@PlanetMojo

Жыл бұрын

Thanks Adam, I just figured out what shape I needed, and had the local Amish bend it up for me. If you don't have Amish in your area, any siding/gutter guy could do it as well.

@arizonaadam3000

Жыл бұрын

@@PlanetMojo Thanks for the reply. Unfortunately, I don't think we have an Amish down here in Arizona. haha.

@Lsmurf13DTE

8 ай бұрын

KSI or Bunger Steel. I use Kay Supply in Taylor/Showlow. Ask for Pat

Hi Sir...were you able to complete the deck overtop of the flat roof?

@PlanetMojo

Жыл бұрын

No. It will be completed though. We built a woodshop first so we can make the panels ourselves 😊

How do you build you're parapet walls? I am finding difficulty in finding a straight answer anywhere else.

@PlanetMojo

2 жыл бұрын

It's hard to describe, but you can see it in the videos from earlier in the project - I filmed the entire thing. On this project the rim joist that surrounds the mono trusses is taller than the trusses themselves and creates the parapet with the addition of some material on the roof-side. I also go over things in this video: kzread.info/dash/bejne/gqVrza2DcanUmco.html Hope that helps 😊

Great videos I'm doing a roof top deck also... have you added decking and rails yet?

@PlanetMojo

3 жыл бұрын

Unfortunately no, covid put a damper on that. We would like to put in the deck this year if the budget allows, but wood is three times the price it was pre-covid around here. I have an idea for a removable rail system that I will be trying, but we can't afford triple the price for wood right now. The rails were always an issue for me because that is the most likely place for a leak. I think I solved that problem but time will tell. You'll probably have yours done before I get to it 😑

@danielali214

3 жыл бұрын

@@PlanetMojo I'm worried to about the rail post.. I think I'm going to have foam sprayed under the joist to seal everything..I hope that works, the roof top is right over my kitchen. I don't know how I'm going to add decking material to the roof top since it's going to be higher then my threshold. Any feedback is greatly appreciated

@PlanetMojo

3 жыл бұрын

@@danielali214 I know where you're coming from. The railings are almost always where leaks develop on flat roofs. My plan is to cantilever the deck over the parapet flush with the outer edge and have rubber feet resting on top of the parapet cap. I'll then attach one post to each deck square with a top mounter rail that I can easily remove to lift up a deck square for maintenance/cleaning. I will likely use modified black pipe for the rail. If the deck is higher than the threshold, that's a problem. Does your roof have a parapet or is it just flat?

@danielali214

3 жыл бұрын

@@PlanetMojo right now it's just flat joist and plywood on top of it... I have a contractor but he seems like he's winging it...not sure what a parapet is exactly 🤦🏾‍♂️

@danielali214

3 жыл бұрын

Just looked it up...doesn't have that yet but I think I'm going to suggest that. But again it seems like it will make the decking much higher than my threshold