Parametric facade design in Revit for complete beginners (Dynamo)
In this video, I’ll show you How to create a parametric façade that is responsive and easy to operate in revit
+ We’re gonna see how to mass and apply division to the façade
+ Create a custom parametric panel family for the façade
+ And use dynamo to control the façade openings
PART 2 OF THIS VIDEO: • Parametric facade desi...
HOW TO CREATE EXPLODED DIAGRAM IN REVIT: • Best way to create exp...
HOW TO RENDER FLOOR PLAN IN REVIT: • Rendering Floor plan i...
.................................................................................................................................
Music from Uppbeat (free for Creators!):
uppbeat.io/t/fugu-vibes/spatial
License code: MS3LRIHUCEIEHEOA
Пікірлер: 20
Comment below what video you want me to make next
Thx a lot it is useful
The shape is applied with me in the end, it remains only how to control the opening of the shape, each element individually
@nohanegm7038
21 күн бұрын
Press the button (tab) on your keyboard and then select one panel it then the parameter will appear
It did work, a warning said "mass contains only mesh geometry which can’t be used to compute mass floors volume or surface area". Now sure if that's what the problem is and if it is, how to fix it?
@simulationcorner4312
7 ай бұрын
Please make sure to create the panels with the exact steps as shown in the video, also be sure to copy the measurements correctly is you don't you will see that error message
My dynamo stuck on run part. how can i solve it?
it works but I can't control the shapes, the shape is opening and closing in family but it doesn't change in the project
@simulationcorner4312
Ай бұрын
Make sure you followed the steps in Dynamo correctly
Would you make a tutorial the building that you make on this video
@simulationcorner4312
6 ай бұрын
Yes, coming soon
@duzguncansahin5420
6 ай бұрын
@@simulationcorner4312 thanks for your replay.
It tell me that the span is too short when I match the points . How can I solve it ?
@simulationcorner4312
Ай бұрын
The two sides have to add up to a certain number so if it's saying it's too short you must be entering the number that's supposed to be on the other side of the panel or too small for the family you're making
THANK YOU ! CAN YOU PLEASE RECORD WITHOUT THE MUSIC? It so Annoying
@jmxsounds
8 ай бұрын
Why? It would be so boring without the background sound. This isn't math class, why not spice it up?
Isn't it easy to model in grasshopper ?
@simulationcorner4312
4 ай бұрын
If you know Grasshopper sure
Didn't work for me, kept on bringing the error code.
@simulationcorner4312
7 ай бұрын
Please make sure to create the panels with the exact steps as shown in the video, also be sure to copy the measurements correctly is you don't you will see that error message