Taking an existing drawing and converting it to a parametic linked drawing.
Жүктеу.....
Пікірлер: 12
@IbrahimYounes3 ай бұрын
What a beautiful easy to follow straight to the point tutorial! Thank you sir!
@1wildcatfan Жыл бұрын
Thanks Tom Your direction into Parametric Modeling will help me during this semester
@fredwalker98672 жыл бұрын
Thank you Tom, such an easy insight into Parametric Drawing - You helped make my transition simpler.
@MrJdubs142 жыл бұрын
Thank you! I've been trying to figure out how to modify dimensions using DIM, but this is what I needed instead!
@KAasifandAssociates3 жыл бұрын
Very informative video sir 👏
@mickedidit52082 жыл бұрын
Thank you
@cristif92 Жыл бұрын
Thanks ! Like for showing us, how to enable parametric tab. I searched about it by some time...
@milkcreightronny Жыл бұрын
THANKS
@davedixon2940 Жыл бұрын
Tom can have an arc constrained to be tangent with a straight line. Working with glass and creating quarter rounds. Glass arc has to be 90 at the intersection with the two vertical sides?
@larstofastrud99842 жыл бұрын
After using geometric constraints in Fusion360 it's hard not to be able to work with them in AutocadLT 2023. There's a Parameters Manager in LT, and I really hope they'll integrate it all in LT soon.
@Test-fl8bi Жыл бұрын
Constraints = Relations/Mates in Solidworks
@techhunt4922 Жыл бұрын
whAT WILL BE THE POINT FROM WHERE EVERY THIGN IS CONNECTED. ONE NON MOVABLE REFERENCE SO THAT IT IS NOT DISTORTED AFTER DIMESION CHANGE
Пікірлер: 12
What a beautiful easy to follow straight to the point tutorial! Thank you sir!
Thanks Tom Your direction into Parametric Modeling will help me during this semester
Thank you Tom, such an easy insight into Parametric Drawing - You helped make my transition simpler.
Thank you! I've been trying to figure out how to modify dimensions using DIM, but this is what I needed instead!
Very informative video sir 👏
Thank you
Thanks ! Like for showing us, how to enable parametric tab. I searched about it by some time...
THANKS
Tom can have an arc constrained to be tangent with a straight line. Working with glass and creating quarter rounds. Glass arc has to be 90 at the intersection with the two vertical sides?
After using geometric constraints in Fusion360 it's hard not to be able to work with them in AutocadLT 2023. There's a Parameters Manager in LT, and I really hope they'll integrate it all in LT soon.
Constraints = Relations/Mates in Solidworks
whAT WILL BE THE POINT FROM WHERE EVERY THIGN IS CONNECTED. ONE NON MOVABLE REFERENCE SO THAT IT IS NOT DISTORTED AFTER DIMESION CHANGE