That is a nice semi auto box fed shotgun. It looks solid. Love what your doing, keep it up. Thanks Panzer Arms.

Will you be doing a 500 round torture test with the MAG 12?

You guys make good shotguns.

I thought my ar12 g2 pro was a easy take down. Man this is super easy. Yall really made this nice and easy for us. Now we get need a vid like this for the Eg240 shotgun.

I dig the Mag Fed shotguns! I need to look into mod the stock to fit a Magpul adjustable stock and then the gun would be Super Rockin'

Can the Mag 12 handle 2 3/4 inch shells or only 3 inch?

Got mine last night, will be cleaning it before I take it to the range. The bolt carrier was stiff out the box yesterday, it was sticking to the back when it wasn't locked. Wanna make sure that the bolt carrier and everything else is good to go before before I take it out to the range.

@panzerarmsusa

Жыл бұрын

Just turn to safety button off, and try again. The bolt carrier group will be stick on the back side if the safety on 👍

@positivelydj

Жыл бұрын

@@panzerarmsusa thanks for the tip. Will do. I like that the barrel will come off for a proper cleaning. Out of curiosity, why do you have to oil down the external surfaces like the outside of the buffer tube that is against your face and arms

Should I lubricate the outside of the barrel or worry about cleaning it or the piston ring? I followed the cleaning instructions in the book regarding the inside of the barrel, and the bolt carrier and receiver. I take it out to the range tomorrow.

@panzerarmsusa

Жыл бұрын

We recommend cleaning and a small amount of superficial lubrication after each use

Mine had a set screw for the muzzle device so watch out

How easy would it be to change out the buffertube/stock for an AR style adjustable stock?

Will this upper fit on g2 pro aluminum lower? And if so can I buy separately since I can no longer buy the whole shotgun?

Is there an easy way to take off the c ring that is around the barrel pin? I had a ton of difficulty taking it off and getting it back on.

@panzerarmsusa

Жыл бұрын

Actually, it’s for the extra safe. When you assemble the barrel pin, and tighten the handguard screw strongly. The two of them pull and squeeze each other. You don’t need to assemble that every time. But even so still you want to assemble and disassemble this; While holding the C-Ring with a hard object at one end, you can push it in the opposite direction with a hard object from the other end.

Can anyone please find a video on the disassembly of a Panzer Arms AR12 G4 because I cannot find one anywhere

@Samuel-qn5yd

2 ай бұрын

Same here. Nowhere to be found.