So if anyone's confused, i will explain this.. so, when you put 2 amps is parallel, you basically just divide the speaker's impedance to 2 parts, both amps handle it. Therefore, you BARELY get any output power increase at the same impedance, but you get the ability to drive lower impedance speakers, thus getting more output power.(ex:1 amp can do 3watts at 4 ohms, but can't drive 2 ohms, if you parallel 2 of them, then you get the same 3 watts at 4 ohm, but you get 5-6 watts az 2 ohms) Alright, but there's 1 really important thing! The audio source must be kept at the maximum levels at both amps to get max power! If you parallel the inputs too, you basically just wasted 3 amps and some solder because it wont do anything. You need opamps to beef up the level of EVERY channel. And last REALLY important thing in paralleling amps: ALWAYS make sure, that you give them the exact same input, because it will blow up if you dont. Also, please dont ruin speakers by putting flour in it... it makes me wanna die

@nurajjanitha4665

3 жыл бұрын

Thanks for the info

@SlinkyStoney

3 жыл бұрын

Adding flour will increase the power and bass.

@pritampatra1595

3 жыл бұрын

Just thinking the same....good information thnx...

@Zalvaker

3 жыл бұрын

Maybe using cuts of paper will be better next time 😅😅😅

@manudev554

3 жыл бұрын

Brooo awesome

This man just discovered the brand new class of amplifier it's a sandwich amplifier 😂😂😂😂

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

@Mr11mukesh

3 жыл бұрын

@@skillmake ok frind I'm going to subscribe your channel

@skillmake

3 жыл бұрын

Please comment on the new video

@davidgarcia87

3 жыл бұрын

😂😂😂😂😂

@Aj_18____

2 жыл бұрын

All in parallel🤣😂

awesome. I never thought of stacking the boards like that. great video

Great , PAM8403 can either blend hot cakes flour , you are such a genius man !!

also when you give input from one single source like a mobile phone doesnt it get divided by 3 and give reduced output. im looking for a multiple 3.5mm jack divider without loosing signal power. so that i can connect multiple amplifiers to single source.

@skillmake

3 жыл бұрын

To do this, first connect an amplifier to the output of the mobile phone, then take the output from the amplifier and connect it to 3 amplifier modules.

@skillmake

3 жыл бұрын

thanks for comment mr parsa

Genious I need a help, I choose speakers which is, 1 subwoofer 4ohm 25 watt and 2 full-range 4ohm 15w. So how many of pam8403 I need to perallale? I want to know the calculation for my understanding.

Dude I have one of those little amps or one similar to it where did you get those little plastic fork things to stick in them what are they called?

@RanjeetKumar-zf4qp

3 жыл бұрын

They are called header pins..But instead you can just solder wires parallelly to each of them

It will work good? If I attach 30v 8ohm speaker?

How long do the speakers work with that battery..?

I love this idea. But. IT'LL PROBABLY MURDER YOUR PAMS-- I haven't tried PAM outputs in parallel like this, but most amplifiers would turn into a small firework if you did. It's because with most designs, slight differences in the amp would cause them to dump power into each other rather than the speaker and overheat. VOLTAGE DOESN'T INCREASE WHEN YOU ADD MORE PAMS, AND VOLTAGE IS WHAT DICTATES POWER-- Peak output voltage of [any number of] these little guys in parallel is still the power supply voltage, so a maximum of ~5v. Assuming the amp output swings over the full voltage range (which most don't), RMS output voltage would be 5/sqr(2) ~3.5vRMS. Power into 4 Ohm speaker is therefore (3.5 * 3.5)/4 ~ 3W RMS, the quoted figure for the amp. This setup runs on a 3.7v battery, which gives an RMS maximum of 2.6v, giving a power of only ~ 1.7w RMS per channel....(RMS - Root Mean Squared - is probably the most reliable/"honest" value used for audio signal levels.) Assuming 2 PAMs somehow did play nicely with outputs connected in parallel, the maximum output voltage would still be 3.5vRMS, so the power into 4Ohm would be the same - about 3W. Same for 10 or 100 in parallel. The only benefit would be if you had lower impedance speakers, say 2Ohm, because two amplifiers could share providing the higher current required to drive them. HERE'S AN ANALOGY-- Think of it like a compressor driving an air tool. If it works at 30psi pressure, that's like the voltage. The maximum cubic feet of air/min it can provide might be 10cf/m, which is like the current. Without tools the compressor is still at 30psi but is providing 0cf/m of air. With the tool in use, the compressor might be maintaining 30psi, but now it's pushing 8cf/m of air into a hose to do it. If you connected the outputs of two compressors together, you would STILL get 30psi but now the system can supply twice the volume of air - up to 20 cf/m. Your original air tool would work the same (because it's still working at 30 psi and taking the 8 cf/m of air it needs), but the difference would be if you ran two air tools together - or one more powerful tool - which would take the air being used to more than 10cfm. BOTTOM LINE-- So, bottom line, connecting any number in parallel won't increase the output power significantly into the same speaker . You'd need to use a lower impedance speaker setup to see any wattage increase. Not only that, but providing enough current to supply a load of 5v PAMs in parallel would be horrible. On a different tack, these little PAM things are awesome, and things like this are the guts of almost all little active speakers under 50 quid. 3w RMS on two channels is actually quite a lot of power. With the right speaker setup it would be plenty loud to fill a room, and move white dust around :) . If you need more power, just get hold of a 12v amplifier module out there for a few quid, and a 12v power supply - they're cheap as chips too. You can get 16W RMS out of those, and use a laptop 16v power supply and you get nearer 25W RMS, which is enough for a party.

@commandolee3608

2 жыл бұрын

Doctor Mollusc ! You are very very great. 💯 explain, you must have been a wizard in Electronics. A Very overwhelming thanks to the guy that made this video( skill make), because if he doesn't do this, people will not learn this from you Doctor ! You are too good....

@commandolee3608

2 жыл бұрын

But the question is, can I use the 12v amplifier wt the mini MP3 Bluetooth player that often comes wt remote ??? Using 4 li-on or 18650 battery wt it....???

@doctormollusc5124

2 жыл бұрын

@@commandolee3608 not sure I understand your question, sorry, but I'll try to answer. You could in theory take the electronics from an existing bluetooth speaker and use it to drive a 12v amplifier to boost the output power, but the chances are the speaker wouldn't be able to handle the massive increase in power output. It would also be a bit messy and complicated with providing 12v to one bit and 5v to another. Some amplifiers work over a large voltage range but I very much doubt a standard PAM bluetooth speaker would survive having 12v put into it. Basically, a 12v system is so much more powerful than a 5v system would be, it wouldn't be very efficient to use any 5v PAM bluetooth speaker components in a 12v system... unless you happened to have loads of the same small speaker drivers hanging around and could wire them all up in series/parallel to cope with increased power. Wiring 4x18650 batteries in series would give you a decent 12v supply for an amplifier, but they wouldn't last terribly long at high volumes and if you wanted to charge them in place you'd need a Battery Management System.

@commandolee3608

2 жыл бұрын

@@doctormollusc5124 Thaks so much for the explaination.

two Pam8406 module There will be no harm if applied ??? Please reply me 🙏

I build same as like you have shown me on you video but when I connect with charger it over heat, Instead of using battery I used 5v charger but the main point is that single pm8403 doesn't overheat with the connection of charger as power.Please I need suggestion from you.

@skillmake

2 жыл бұрын

just use battery because you need more amperage

That’s pretty niceeee! 😂 I might try it out and oh! Nice vid 🙂

@skillmake

3 жыл бұрын

Thanks for watching my miguel please share for friends 🥺🥺😂😂😂😆😆😆

@miguelduron6281

3 жыл бұрын

@@skillmake sadly I don’t have that much friends 😅 but I’ll try something 🙃

@skillmake

3 жыл бұрын

If you want see this video have cool idea kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html

@theultimatetime8029

3 жыл бұрын

@@miguelduron6281 hai mr chimken

@user-ce2nf5lo2k

3 жыл бұрын

Щ щ щ щ щ зло то хххх жить-то

Great cascading of differential amplifier ❤️

@skillmake

2 жыл бұрын

Glad you like it!

mr. @skill make, can yoy explain please, how 3 pice of pam handel 300x2 watt speaker? Need to know, i am not a electronical engineer, just love electeonic. so explain like the way I understand. 🙏

Can I used pam8610 like pam8403?

Wow amazing

5:25 Attention remember do not use nothing kind of dust in your coaxial speakers if it doest hace dust cap because it can stuck inside the coil 🤦‍♂️

@bcd9994

3 жыл бұрын

ya bro .

@thehardbihari505

3 жыл бұрын

Right

Bro make video on using 1 single amplifier board VS using 3 amiplifer board in parallel...and test with speaker...that makes me more clear...

@skillmake

3 жыл бұрын

Hi anshuman I made a video with an 1 amplifier. Here is the link. You can compare the volume in both. Please watch this video. kzread.info/dash/bejne/ZHt9qLqPqtPFmcY.html

@skillmake

3 жыл бұрын

Thanks for comment ☺️☺️

@heyAnshuman7

3 жыл бұрын

@@skillmake ooo thank you bro...💥💞

@skillmake

3 жыл бұрын

@@heyAnshuman7 I'm very happy because I have users like you

bro can you explain it how much power we need int his case and cause i try it with 3 chips and 3.9v battery buy my chip heated.

@skillmake

3 жыл бұрын

You need a high amp battery if the battery capacity is not good and you must use the battery and not the adapter.

Bhai circuit kharab nahi hoga kay

Very cool. Congratulations 👏

@skillmake

2 жыл бұрын

Thank you very much!

i laughed hard when you put a powder on the speaker

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

@lftlearnfortechfun

2 жыл бұрын

But why?

How many watts are produced by the sum of the three and how long does the battery run?

@skillmake

3 жыл бұрын

Hi mr حیدر out put=9watts and you need 3.7battery

Amazing.....incredible....

@skillmake

3 жыл бұрын

Thanks mr 😊😊😘

Tengo dos parlantes entre los dos suman 150 wts, se puede usar??? No se calienta el amplificador??

@itachilokopoco4949

10 ай бұрын

Si armastes este proyecto bro ? Que tal suena ?

Ek se bhi vahi output milega...3 Circuit ki koi jarurat nahi

how long did it take before the ics start to ignite ??

@skillmake

2 жыл бұрын

Also, nothing happened, but the heat produced a little dies thanks for comment mr ahyon🙏🙏

Ye kon sa speaker hai send me detail

Ye only mobile ,laptop, Bluetooth connection se sahi chalta hai lekin kisi bhi aux se connect kerne per sound theek se nahi chalta. Mera zebronix prime 2 usb 2.0 speaker ki left ic jal gaya tha to Maine is mini amplifier ko usme fit kiya mobile, laptop,ya Bluetooth se sahi sound aa raha hai lekin set top box waley aux se sound bilkul sahi nahi aa raha. Gher gher ki aawaj aati hai. Jabki yahi zebronix prime 2 wala speaker 🔊 pahley set top box me chal raha tha. Purana board jiski ek side ki ic jal gayi thi to dubara se connection kerne per sahi se chal raha hai. Kya problems ho sakta hai.

@skillmake

3 жыл бұрын

If you want see this video have cool idea kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

0:25 what is the name of those little black connectors?

@skillmake

3 жыл бұрын

Jumper

@Rifju

3 жыл бұрын

@@skillmake thanks!

if I use 2 pcs for 3w 15 ohm speaker,,, dose it working well??

@skillmake

3 жыл бұрын

Yes mr robin you can 👌👌

Excelente video

@skillmake

3 жыл бұрын

Thanks mr lopez

Just awesome bro .i like this video & idea....

@skillmake

3 жыл бұрын

Thanks mr gopal

@skillmake

3 жыл бұрын

kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html if you want see this video

@gopalpramanik9566

3 жыл бұрын

@@skillmake why not bro.

@skillmake

3 жыл бұрын

Thanks if you want please share for friends

@gopalpramanik9566

3 жыл бұрын

@@skillmake ofcourse.

Lebih bagus tambah tone control sob😍😍

Bro are you still making videos today about the sound n music

How could it be possible to run 300w speaker on 9w output? Please explain.

@skillmake

2 жыл бұрын

yes you can 👌👌

Bhai 50 watt ka speaker hai 5 volt amplifier Kam karega ya 12 volt amplifier jyada accha rahega

Sir valium slow to nhi hoti

Muje lagta hai ye ic 10 minutes se jyada nahi chali hogi 😂😁😊☺

@mrsnggaming555

3 жыл бұрын

Common Sense of Common Man

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

I need a circuit for 15W 3ohm speaker, what is its name? And will it work well? Please say....

@audioelectronics542

3 жыл бұрын

Bro for your need you can use PAM8610 Class D amplifier which is 12 volt powered amplifier and gives 15 watts per channel.

@skillmake

2 жыл бұрын

thanks for replying mr 🙏🙏🙏

Can we use same this method on pam8610 ? Please reply must. I m Asif from Pakistan

@skillmake

3 жыл бұрын

Yes mr asif you do that

@MohammadAsif-mq1ek

3 жыл бұрын

OK boss I will trying this method for pam8610

@skillmake

3 жыл бұрын

@@MohammadAsif-mq1ek do that ❤️❤️👌👌

Nice mai bhi try krunga bhai thanks🙏❤🌹🌹

@skillmake

3 жыл бұрын

Thanks for comment ☺️

@habiburrehman3014

2 жыл бұрын

shivam raj kia ap ny try kia

Great idea.....thanks!

@skillmake

3 жыл бұрын

Thanks mr 🙏🙏🙏

i did but it doesn't care what i do help me please does she have a remote or something? I turned it on with the signal from another amplifier that I have it works but she does not have this amplifier remote or something?

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

How works, what about make many chip Amplifier like 20 Pack. Isn't very large and louder..?! 🤔🤔🤔 Those Chip are really use that, I wish buy that..!! 🤔🤔🤔

5:1 I'm not expected 🤣🤣🤣😂

@skillmake

2 жыл бұрын

😮😮😮😮

Game over speaker

Bro can pm8404 run 75 watt 8 phm speakers? Kindly reply.

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

I can do this with a 2xTPA 3118?

@skillmake

2 жыл бұрын

I'm not sure if it works on this type of module or not🙏🙏

Great work. If it's fitted in box we get bass

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

@madhukunde6504

2 жыл бұрын

@@skillmake what is the use? And didn't compared india. 😃

Wow 😳

Is raad Ka Kia name hn

Buenos dias hola vi un vídeo similar donde no se podian conectar en serie asi y no se escuchaba como que hacia cortó circuito

@InventableESPT

3 жыл бұрын

Realmente tal como lo hizo es un corto circuito, no importa si juntes hasta más de 3 pam8403 en páralo no aumenta la potencia y solo dañas los módulos,

@atrelluzroig8529

2 жыл бұрын

@@InventableESPT justo lo que quería saber, había visto algunos video haciendo eso pero no sabía si era válido, entonces no se gana más watts poniendo los pam8403 en paralelo

@InventableESPT

2 жыл бұрын

@@atrelluzroig8529 no amigo esto esto depende del voltaje y al amperaje pero como cada módulo trabaja a 5v no lo podemos forzar a trabajar a más voltaje para tener un poco más de potencia ya que se quemaría al instante y pues como mencionada sin importar cuantos utilizes no aumentas la potencia a parte de que están las salidas en corto y no te dará nada de potencia, es falso en pocas palabras

Awesome 💕💖💞

@skillmake

3 жыл бұрын

If you want see this video have cool idea kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

Good job 😎👍💯

@skillmake

3 жыл бұрын

Thanks mr mandal

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

nice idea😊😊😊.sorry now missing seen

@skillmake

3 жыл бұрын

Thanks mr arnold

@skillmake

3 жыл бұрын

If you want see this video have cool idea kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

Amazing so nice

@skillmake

3 жыл бұрын

Thanks mr arehaman

Bro my amplifier 3set pam8403 gets heat very fast While I am using 25w two speakers 🤔 Please give the answer

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

I am already set 2 pam8403 in the same connection in a amplifier board

what is the name of the component you cut at the beginning of the video🙏🙏

@skillmake

2 жыл бұрын

jumper 🙏🙏

@kodejagad

2 жыл бұрын

@@skillmake 🙏👍

exelent 👍👍👍

@skillmake

3 жыл бұрын

Thanks mr hamid

@skillmake

3 жыл бұрын

kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html If you want see this video have a good idea

Усилитель 9 ватт на канал и динамики 300ватт, гениально!

@skillmake

2 жыл бұрын

please English 🙏👌

@martinwaldes3757

2 жыл бұрын

Да не будет там никогда 9вт. Очень сомневаюсь, что оно вообще начнёт работать.

@mcsmontandocaixinhasdesom2558

Жыл бұрын

Leu minha mente

@dfoxbeatsdfb2398

Жыл бұрын

@@mcsmontandocaixinhasdesom2558 бывает)

bro i can't get any bass from pam8403. tried 3 boards and they all lack sound volume and bass idk why

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

Very very good idea 😄😄

@skillmake

3 жыл бұрын

Thanks for watch mr humayoun from iran ???

@skillmake

3 жыл бұрын

If you want see this video have cool idea kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

Pam8403 amplifier ke battry supply ke liye 5v 1am ka charger chalega

@skillmake

2 жыл бұрын

please English 🙏

Add 10 more to make it up to 300w

No TF battery won’t enough add 5v2mp.

Great bro!!❤️

@skillmake

2 жыл бұрын

Thank you so much 😀

دست مریزاد👏

@skillmake

3 жыл бұрын

ممنون داداش

Nice coba X5 pam 😂👍🏻

@skillmake

2 жыл бұрын

thanks mr you can *8 pam in my channel

This board noise problem solution pls

The speakers seem to be out of phase.

how will you recharge the battery?

@skillmake

2 жыл бұрын

Hi mr raja you can change battery with module charge 🙏🙏🙏

Bhai 3 joint karne ke baad jab mai song play karta hu tab sound dropping ka problem aa raha hai please solution

Amigo como se llama esos pines o palito de metal me dice el nombre por favor

@RaniaHumairahzidni_chanel

2 ай бұрын

header jumper cable male

Does the watt of amplifier increase.?

@skillmake

3 жыл бұрын

Yes mr agung

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

bos itu yang besi untuk nyambung namanya apa bos kalau mau beli

Bahi tv wala speaker me ketna board lage ga

@skillmake

3 жыл бұрын

If you want see this video have cool idea kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html

O volume fica limpo no máximo ???

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

Sir please esame blutooth panel laga ke dekha nhi chla 5v se

but in short, does it work?

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

Wow. Very good

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

whats called terminal put your pam8403?

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

Amazing....bro plze play new song for test.

@skillmake

3 жыл бұрын

Ok bro i create new cool video

@danial_bass

3 жыл бұрын

Bravo😎

@skillmake

3 жыл бұрын

If you want see this video have cool idea kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html

Bro plz help me it will work with 5 pam8403

@skillmake

3 жыл бұрын

Yes mr you can use many amplifier module

Super bro

@skillmake

3 жыл бұрын

Thanks mr chandu ☺️☺️

Can you please do this same with tpa3110 😀

@skillmake

2 жыл бұрын

Hello dear friend, please subscribe to my second channel so that I can create the content you deserve. Thank you. Just click on the link and subscribe to it.🙏🙏🙏🙏 kzread.info/dron/BoZGn08nBAxE9M5T53_UKg.html

Nice video

@skillmake

3 жыл бұрын

Thanks mr ratul i suggest watch this video kzread.info/dash/bejne/qKdn3Lhuna7RkZc.html

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

what is its input and output Watt

@skillmake

2 жыл бұрын

in put power =jac 3.5 (mobile phone power) out put watt = 18 watt mr rehman 🙏🙏🙏

Bhai ye speaker 300w ka hai to? Mujhe reply karna

@skillmake

3 жыл бұрын

Yes,ali this speaker is 300 watts, but this is the maximum power of the speaker and in practice it has a lower power than writing. But the sound output is too high tanks for watch

👍👍👍👍👍perfekt

@skillmake

2 жыл бұрын

thanks

Can i connect 8 inch speaker??

@skillmake

3 жыл бұрын

Yes you can do it

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

Pls try with TPA3118 also.

@skillmake

2 жыл бұрын

🤔🤔👌👌

aa Preciso de indicação do(a) Senhor(a), para um circuito ATIVO TRI WAY e ou TREE BAND AMPLIFIER, baixa potência. Esclareço: - três circuitos independentes com seus 3 amplificador operacionais, fonte SIMÉTRICA comum a eles, circuitos quase iguais e sintonizados ou filtrados por R/C simplificadamente na entrada de áudio. Veja que não é Pré. É simples, mas é Amplificador e sem potenciômetros nas tonalidades. .Por favor. Muito obrigado.

@santowalterscaramella6323

3 жыл бұрын

E então?

Sir... Maximum kitne hours ke lie use kar sakte?

@najamumar4303

3 жыл бұрын

Ans plz

@gamehacked25th

3 жыл бұрын

Yes sir with li-io battery single cell

@skillmake

3 жыл бұрын

Hello dear friend, you recently watched the videos of my channel. Please watch this video in full and comment on the subject and idea, as well as edit and how to record the video. I need you, my loyal friends. kzread.info/dash/bejne/d4Nts66Cg8evktI.html

but how many watts are you getting on the output, vs one single amp?

@skillmake

3 жыл бұрын

3=9wat 1=3wat

@MrBooMY3

3 жыл бұрын

3 watts per channel per board x 3 boards is 9 watts per channel.

@dfn03

2 жыл бұрын

@@skillmake Don't lie!

@ciiriin

2 жыл бұрын

teorical: 5^2/8 ohm / sqrt(2)= 2.2 watts. in 4 ohm... 4 w but the max is 3.2W

What he make is a 18w amp for speaker, well it not bad

Wark full ?????