Fantastic mate. I am about to change mine as well. I have similar issues with high end power loss under load (towing a caravan) on my MY15 NX Pajero, so I am also starting with the simple jobs, but I fear it will eventually be a trip to Dieselcare Toowoomba. Fingers crossed.

You’re a good guy Brett. There’s just something about Australians that I find easy to watch. You’d be a great neighbour or friend to have. Very informative as well. 😉👍

@DENMONKEY

Жыл бұрын

Thanks Mr D, that's bloody nice of ya to say.

Hey Guy's, i just wanted to let everyone know that there is a common issue that most people seem to run into with there Gen 4 Pajero's at around the 200k+ mark that changing this filter resolves. at around 1/4 of fuel left in the tank the car will just stall with no warning and shutdown. all forums have pointed that the fuel flow is restricted due to the build up in the Filter . i personally had this issue happen last week while going through a round about. alot of research and reading and this was the culprit . have since changed and tested with no further issues. so this job could prevent alot of heart ache and/or phone call's from a frustrated wife stuck on the side of the road . I hope the above might help someone who is reading through here and save abit of forum research to diagnose this fault. thanks again Brett for a detailed video. i had the ipad propped up as i worked for a bit of reassurance that i was doing everything properly as i seem to end up doing with most Pajero related work 😀😀

Hi I have a 2011 NT and had my manifold cleaned by Maitland 4WD Centre 75 Lee St, Maitland NSW 2320 the car starts easier and picked up the fuel consumption slightly. The guys said one port was nearly totally blocked. It was done at 160000klms cost around $400 cheers love your content

@_cowdoy

Жыл бұрын

Did they do a chemical clean or did they pull it apart?

Dude, that was so nearly a rollover just before you crested that climb... reckon you not only needed to change tank filter, think undies are in order, too!

@DENMONKEY

Жыл бұрын

Youre right, it was close Karl. I was knew where I was and felt it go up but it didnt feel that bad in the car. I did realise that my vlads mod is not working, Ive need to reconnect the ground ( I've made this mistake before when fitting other stuff and forgetting to refit it) So I only had the rear diff lock on and no traction control on the front end, but didn't know at the time. This is a perfect example of how the rear diff lock ONLY can bite you in the arse because it can cause the car to kick out sideways at the back end, just like you see here and is why the front ended up the right hand wall. Had I know the TC wasnt working because of the vlads thing, I would have anticipated the handling change. I didn't though. :) rookie mistake . But Mick was there to catch me :)

@karl4834

Жыл бұрын

@@DENMONKEY does that traction control mod make a big difference? While I've had rear diff-locks in previous vehicles and have a factory one in my NW, thus understanding how great they are to have over an open diff, on many occasions I have found the Pajero's traction control system more effective than the diff-lock only in some situations, so I'm kind of guessing that the TC mod together with engaging the rear diff lock would have a profoundly positive effect in previously difficult/unpassable obstacles?

Hey Brett, That was me that recomended a potential Mechanic At Cessncok. Josh at Ray Prescot Automotive Cessnock worked on my NT Pajero and was very helpful and previously owned a Pajero. post Clean he also Organised the Remap and Dyno Tune also. i havent spoke with him since but may be an option. other than that maybe the Guys at Edgy Auto's Might help? i dropped in there the other week and they were very helpful family business. thanks again Great Video and keep up the content. Guy

You’ve been a busy man mate, I was wandering what was happening with the videos good to see you back, I think I’ll look at my filter in the triton ,look forward to the next videos

You need a 1/4 drive set , with swivel end extensions to get to those nuts much easier.

Great clip as always mate. Cheers Steve

Thanks for the tutorial, Brett. Very helpful. If you do figure out the actual cause of your power loss issue, please share it with us in one of your future videos. As a fellow paj owner I will be keen to know how you go about diagnosing and fixing it. Cheers.

@DENMONKEY

Жыл бұрын

Don't worry about that George, I definitely will.

Wow someone been a tad busy 🤣. Good things take time. Yeah that's something I would like to do to my Pajero.

Hi Brett, mate loved all your content, followed along for sometime but its taken me a long time to make an account and subscribe. Thanks for all your great videos!! keep up the content!

Thanks for the content brett, the fuel filter is next on my list of high(er) kay paj maintenance things to do (theres one on my shelf as i type this).. Hope things settle down for you and you can get back to regular programming. 🍻 2moe

@DENMONKEY

Жыл бұрын

cheers Bro, here's hoping. If it's sitting there, get your finger out and just do it. That said, I have a secondary filter Kit for the paj that Ive had for over 2 years or so now. So don't listen to me

Hi Brett you mentioned vacuum hose leak and you replaced with hose from Supercheap, what size hose or is it just standard size?

I think I would have got the good old garden hose to the top of the tank before opening it, then back up the drive, to dry area to complete the undo (just my 2 cents worth) But brilliant instructions throughout .... well done

@DENMONKEY

10 ай бұрын

I'm not always that smart Derek.

Lad, mk2 '97. Convinced the filter has never been changed. Pipes broke off in my hand when I went at it due to corrosion, every nut/bolt weldrusted together😢

Great stuff...cheers

Welcome back brett Fricken missed you Carn't wait for the coming video's Moving. Yuck. Lol

@DENMONKEY

Жыл бұрын

Hey Bobby , thanks mate. Nice to be missed. Yes, moving sucks ass.

Hi i found my 2015 shogun/pajero 3.2 diesel loosing a small amount of power but only under load. so i stripped out my throttle body and inlet manifold and cleaned everything and boy it was full of crap and now what a difference it runs like a dream with more power.it was a big job but well worth it.I have now since fitted it with a catch can.... i hope this helps its worth checking out too see if yours needs cleaning.

@DENMONKEY

Жыл бұрын

yeah, its on the list of things to do anyway, so if I can find someone to do a good job for me it will go in and I'll report back. One guy I asked if he did them said yeah no worries. I figured great, this is the guy. then he showed me pics of this contraption he made that he attaches to his drill to clean them out. He was very impressed with himself. so much so that I could tell it had only been tested once and wasnt a regular thing for him. so I'm steering clear.

@stevenward5134

Жыл бұрын

It sounds like I would steer clear as well. All I used was heavy industrial water based degreaser and a large plastic baby wash tub to wash and soak all of the parts. And when the inlet Manifold was off and you could see the valves I used a toothbrush and a wet and dry vacuum cleaner and a little elbow grease..

Thx Brett If you had thus done at a Mits dealer, would they just drop the tank instead of acceding from the top ? ….maybe not thinking why there is an access port Cheers

Just brought pargro 2002 model having ploblem s when going up hills so am changing fuel filter as when idling spits a bit and shakes from all I have seen and watched I think it's the fuel filter any thoughts about what it could be?

Brett , just remember you have drive it home

At 10:51 we see the fuel pump or is it just pipe at which end there is the filter and the pump is located else where? My goal is to find the fuel pump in order to hit it a bit with hammer since it doesn’t work now (read that it could make it run again).

@tedisrozenfelds7630

6 ай бұрын

In this videos kzread.info/dash/bejne/jJiCxs6IhdPWlM4.htmlsi=BiaZqvp2O86xrfab 4:48 I see a completely different part (fuel pump not the filter as in the current video) that goes into that hole.. I'm confused.. Where is the fuel pump located for pajero?

7:28 Those inside window covers, do they come as a kit or did you fit some universal product? Thanks for shearing your knowledge with diesel system

@DENMONKEY

Жыл бұрын

Hi, they're custom made for the vehicle. Solar screens Australia is where I go them. They do just the side windows or a full touring set

hey mate thanks for another tutorial, any chance you can time stamp your vids so i can get to the installation since its a 30m video, cheers

Brett, do you still have the original seats? I am finding my 2017 paj seats to be back breaking!

Would it be possible/ worthwhile to use a hose and brush to scrub and dry the top of fuel tank before removing the filter cover?

@DENMONKEY

5 ай бұрын

Yeah absolutely if you have the time and patience. I'm just not that smart 😞

Thanks

Mate I just bought that in tank filter from Mitsubishi, its got a white cylinder cap like thing inside thats loose n slides up or down depending on gravity/orientation - is this how its supposed to be?

@DENMONKEY

6 ай бұрын

Sure is

Its either fuel pump running on their last legs or some injectores not working at 100%. Atleast of what you describe it seems that you dont have enough fuel pressure on high revs, you can check that with a cheap OBD2 and see what is the pressure of the fuel. It also may be something not remotely to fuel, i dont know the full details but in this video you are using 4x4 and lost power but you also say sometimes it works good sometimes it does not, i know the Pajeros diferential tends to break often you may want to make sure if its running on top noch or if its somehow sliping. Just some ideas im not a professional but it does not cost you a pound to have a look at it

@DENMONKEY

Жыл бұрын

I had an old delica that did a transfer box. When they sourced me one, it came off a pajero. So I have some idea on what that one feels like but this aint it. It's not only in 4wd . when I was having a sunday drive (before the change) , I got it too. So I don't think it's that. It's just the feel of it that says fuel, but could be wrong. Better not be injectors or fuel pump. $$$ :) I have several OBD readers so I could do a review on cheap ones that worked for the paj off ebay. So its easy enough for me to check. I did a scan on it and got no codes, but will check the specs and see how it is compared to those. cheers for the tips.

Do you have a video on the vacuum hose change?

@DENMONKEY

Жыл бұрын

Afraid not, I literally just got some hose from supercheap, and changed everything I could see on the drivers side. I was away when I did it, so didnt have the camera etc to sort it. I can' remember what made me think it was that either but I think it was because it was heat related was in there somewhere

If you want the intake cleaned I can do it for you. It takes awhile and is dirty but not worth what the shops charge

@DiHandley

Жыл бұрын

You can?! Where are you?

Try a flexidrive shaft on a socket

@DENMONKEY

Жыл бұрын

had one tried it, didnt work. I did record trying about 4 different things but they all got cut to keep the length reasonable. It went on but was still applying pressure from the side. Thats where the comment I left in about not wanting to break a bolt in there come from :)

11:26 HA! gottem

@DENMONKEY

Жыл бұрын

:)