I do this but with more colors. Yellow wash should go 1st, blue 2nd, red last and make sure you use enough to kill most of the yellow. Then you must mix your skin tones in a wash and go over it lightly. Tamiya TS-80 flat clear is the best sealant for me. It dries in about 10mim and I can continue adding shading and highlights.

@TheSpectreIguana

2 жыл бұрын

How many drops do you use of each wash mixed with water?

@myfastgti07

2 жыл бұрын

@@TheSpectreIguana Very light washes. 25% paint 75% water. Also use pointy brush to absorb paint that accumulates in the small crevices like the ear lobe, eye and nose. Just don't allow the wash to fully dry out until you have a even coat

@TheSpectreIguana

2 жыл бұрын

@@myfastgti07 so similar to the video for 1 drop of paint, add 8ish drops of water

@TotzkieGG

Жыл бұрын

saving your replies on my little notebook, thank you!

before you master with yellow red and blue, you have to paint it with skin flesh color first, those 3 colors to do a more vivid shading effect.

@FlashpointCustoms

Жыл бұрын

I’m aware. And my camera doesn’t pick up all the details, believe me, it makes a difference in person.

@jorgef.6477

7 ай бұрын

Hello I have Bruce lee 1/6 head painted light brown and I have the gang hood 2.0 but the color don't match what can I use..

must be dry under all layer Yello red blue

Thank you.

love this tutorial!

Hi. What is the tool you use to sharpen the painting lines eyes part, please.

Where do you get the heads from?

What Brand of paint and Brushes you use

What material are your heads made of?

It does’nt look like anything change

@crxvtec0069

9 ай бұрын

That’s because the “washes” are water based, and then he going in after with more water on his sponge which is washing out everything he just painted. A water based paint or wash will be re activated again when you introduce water to it. You have to seal it otherwise you’re essentially just painting it on and then washing it all back off again. 🤦🏻‍♂️

What do I need to do, If I want to make custom figures on marvel legends? Do I need a technique before and after painting tips? Cuz I just have tried to paint on figure with model color paints and after drying the paint comes easily off. Did I did maybe something wrong? Or the paints are not good enough for plastic? I want to know!

@FlashpointCustoms

Жыл бұрын

It all depends on the prep work you do for your figures beforehand. Are you washing them with warm water and soap to remove the mold release agent left on the plastic? Are you lightly sanding them down to better help paint adherence? Are you priming them? Are you using $1 bottles of craft paint or are you using model acrylic paint? All of these factor into having good paint adhesion.

Nice ..you SHOULD mention the color references you use . Would be great

I appreciate you taking the time and putting up these tutorials. What do you use as sealant in between and final steps?

@FlashpointCustoms

3 жыл бұрын

Thanks! And I use Krylon Low Odor Matte Varnish before I do the washes, and for after everything is done I use Treehouse Studios Clear Acrylic Matte Varnish (Hobby Lobby).

@lRoboToast

3 жыл бұрын

@@FlashpointCustoms Thanks man! I just saw your reco for the Treehouse Studios on your IG stories lol. I ordered a can to test out.

@brentbarr4679

8 ай бұрын

What do you use to get the look when finished. Like what Sheen are the base color, the washes and I caught that your sealer is matte not flat. I've been really curious I go back and forth between your videos and fett.clone to try and get an idea of how I want the tones to come out. Thank you for your time in making these videos

Do.you make your own sculpting Tools

You. ❤.

Are they made of some kind of resin?

Gemreat hib

Looks the exact same

@FlashpointCustoms

2 жыл бұрын

Not in person.

Anyome know where i can get tyler the creator head model trying to make my own figure

Barely able to hear you.

@FlashpointCustoms

3 жыл бұрын

I plan on making another video but in the 1/12 scale. I’ll make sure the audio is better.

too much yellow

Boring