Tip for Extinguisher: You need to put some kind of nozzle that is very thin at the end of the tube where the paint comes out of the extinguisher to get a much stronger and high pressure output.

@rasmis

2 жыл бұрын

Yeah. I was thinking; Doke: Aren't you an engineer?

@CANControlGRAFFITI

2 жыл бұрын

This guys kind of silly for not knowing that honestly

@mdspaghetti4949

2 жыл бұрын

Tip from engineer: if you reduce the whole nozzle and internal hose size you wont have such large pressure differences when initially pressing the valve. Also drill and tap a fitting into the wall or base of the can to pressurize with a shutoff valve after you drop the paint in from the top, turn upside down and fill with high pressure air.

@richardmetzler7119

2 жыл бұрын

@DokeTV check out this German video, JUST explains it very well. And I'm not sure but he has another way to fill the fire extinguisher kzread.info/dash/bejne/fYSVtK2Bo6y4hdI.html

@7seVIIn7

Жыл бұрын

Do not use your finger 😂

the video was reeeeeeaaallly funny. I love to see you suffering. hahaha, so sad there was not enough pressure for the IC ;-)

@keithsmith8331

2 жыл бұрын

So evil Smoe 😂

@ElMuzhighz

2 жыл бұрын

The struggle was real trying to remove the nozzles hahahaaa Cheers boys LOve all your work!!!!!!!

@11sngain43

2 жыл бұрын

6:07🤣🤣🤣🤣😂😂😂❤️❤️❤️❤️

@KLX140rl

2 жыл бұрын

Dat mean smoe I saw you met graffitibloq

@omis-oneakagraffititartmor1251

2 жыл бұрын

But it will be funnier if anybody were at the other side from the wall at this moment🤣

If you get a longer hose, get the extinguisher pressure into the green zone, and a decent nozzle you could get an amazing variety of effects and efficiency from it as well

@D3M0N001

2 жыл бұрын

Kidult!

@TheUnlikelyBaker369

2 жыл бұрын

Dude you read my mind❤

@No.ID_91

2 жыл бұрын

Yeah he needed to connect a fitting to his air gun that fits the air extinguisher then pressure it to green. He should of done a little more research

@kishascape

Жыл бұрын

Should’ve used a better paint mix too. Stupiiiiiiid

What you need to look for is "Class A water fire extinguisher". You're using a class B/C dry powder extinguisher. You be better off with a liquid/water based (class A) fire extinguisher designed to work with liquids. Find one that already has a schrader valve (the kind on a bicycle/car tire). Remove the schrader valve pin and fill the extinguisher through the hose (liquid will go in the hose as air comes out the schrader valve) then replace the schrader valve pin and pressurize the extinguisher using your pump. Will be much easier than what you are trying to do here. Emailed you...I like to commission a piece.

This video is one of my favorites. Hearing you speak in your own language is awesome, and for some reason I love hearing you cuss. It’s hilarious. Your creativity never ceases to amaze me. I’ve been following for over a year now and I’ve never been disappointed. Not even once. Thank you for sharing this with us. 😊

This is pure comedy! Big ups, loving the energy Doke!!!

@unzulaessig

2 жыл бұрын

Yeah right, laughing my ass off when he tool the extingusher ;D

Doke - "Don't do it" Also Doke - "BUT JUST IMAGINE IF!!!"

Damn already million followers.. i remember i followed you since the start when i still used to do graffiti.. you even followed me on instagram for some time bcuz you didn’t have much fanbase at that time.. about your other videos i have to say you’re doing really good thing to your city and and it’s awesome to see you get opportunities to do it.. Big respect Doke

As a fire safety technician, my method of getting tough nozzles off is to use a good sturdy work bench and just slam the whole canister on its side with the handles hanging over the edge. Squeeze the two parts of the handle together and apply downward force with your dominant hand while beating the side of the extinguisher on top of a table. It might take two or three good whacks ( and it's loud ) but there's no tools needed and you shouldn't break the gauge off. Here in the U.S. they're supposed to be serviced every 6 years. I mainly do restaurant kitchen suppression systems but every once in a while I'll have to empty and refill a hundred of these things in a day. It sucks. *** What you should have bought is one that is meant to hold water and not that sodium bicarbonate powder or whatever. Also the hose threads into the top part so every company has its own adapter to screw into the head for re-pressurizing.....the things you have look like they were made to inflate pool toys or an air mattress. Some of the "Water cannon" type of extinguishers ( they're always chrome/ silver, not red ) will have a schrader valve so they're actually able to be pressurized with a bicycle pump. Hope that helps. For what it's worth: I'm a "writer" myself and I cant stand seeing this kind of shit 3 stories tall around my city. I think the trend has definitely died off, thankfully. Great tool if you wanna just vandalize a building for no good reason. I mainly use my big ass water cannons to own my nephews in squirt gun fights.

@toastersmc

Жыл бұрын

Omg a whole paragraph

Some of the older fire extinguishers are refillable and also have a filling valve like one on a car tire, in which you can fill them up with gas station air pumps

@STONEDay

2 жыл бұрын

They are called "Class A water fire extinguishers"

You definitely made it 1000x more difficult on yourself with those extinguishers. I had some as a kid that I played with all the time, that had a basic valve you could connect a bike pump to. No fighting against the pressure to hold the pump in place, and you didn’t have to squeeze the trigger while pumping.

Hahaha The struggles were real :D I'm not even halfway through the episode and I just had to say it's absolutely hilarious :D /Midas xD

“According to tutorials… this should be hard” 🤣 at least you went at it knowing your odds 💀😂

Pro tips : 1. while emptying the extinguisher flip it upside down so you let the gas go out and not making mess. 2. to open the extinguisher lay it down and beside a curb or a stair and hold it then step on the handle hard and it'll open quickly kinda like he did at 05:02 3. in the end of the tube (the housing) put something like the stuff that comes with hand pumps on the end of it to make it more better and less consuming. 4. if your extinguisher has no valve like this one you can drill a small hole in the top of it and put a screwable shredder valve so it'll make it 99 times easier to fill. 5. use darker colors so you get better results while spraying. 6. if you put more paint than air the pressure will empty faster and the opposite is true . 7. want to get the best extinguishers go to a parking lot. 8. as Doke said don't try this but who cares it's fun asf. 9. don't over fill it or u'll end up making a paint-nuclear bomb. 10. don't die and keep up

This is gonna be lit

@a_guy

2 жыл бұрын

I see wat u did there 😂

DOKE's energy, personality, and humor is the stuff of legends. Oh...and then there's the raw talent... 😆 Don't ever change brother! Thanks for the continued ruler content.

Never seen Doke cursing this much lmao HILARIOUS the whole adventure 😂😂😂😂

the title is "try to open fire extinguisher"

My bro sir Doke your killin me hahahaaa, I had to stop the video here to say that there are fire extinguishers that have actual one way bike/car valve connections to re pressurize so so much easier and mess free! Cheers Leigh from Goldcoast Aus!!

@ElMuzhighz

2 жыл бұрын

Also meaning you can pump way more pressure into them too!!

In this session, I catched this activities containing 50% of hard work, 20% fun, 20% swearing and 10% of spraying activity. But overall it was blessed by God

So much money and time respect bro this is why i watched you since 2015

If you modify the hose from the broken one you could make a proper threaded connector for pressurising the new one. Also a garden hose head fitted would allow different spray patterns.

You were not kidding about fast shipping. It took 5 days to get from Slovakia to Colorado in the states. Amazing work my friend!! Super happy about my merch :)

Roller on a big pole is a good laugh for high up tags, even block pieces. Outside of that building opposite the tracks looks ideal.

YOU have To use a one way valve and a conection to a co2 can (this smal one)Than YOU just change the co2 an and have much more preasure 👍🏼

You need to set it up with an adjustable nozzle. Should be much more out of that, and that's pretty much bigger thicker letters! You can do better! Also, you can probably filthy vessel up 150 psi. At your own very extreme potential risk. Just think logically about it, if max pressure is showing 90 to 100 PSI, the margin for safety is probably significantly higher then your standards pressure vessel the fact that it is specifically designed to be near Fires at extreme temperatures that would lower it's integrity.

Doke is a chill guy until he has to open the fire extinguisher 😂

I burst out laughing so many times in this video

Hay DokeTV In you’re next project can you try some good old school Mural with black gray and white and some bright colors ?

I can't stop laughing watching this. Love it

Please do more this stuff it was so dope

You know the man is in it with his heart when paint gets in his eye and still contiues

Glorious Tuesday to wake up to see a new video from you and merch to buy off your store!! :) keep up the great work Doke!!

Netflix : are you still watching?... Somebody's daughter: 8:56 Somebody's son: 14:26 The guy in the bathroom after: 10:33

The whole meltdown is my favorite part 😭😭

I feel like you gotta do a part 2 for this!!!

You could have tried if a muzzle or what is called, a restriction on the end of the pipe, could make it more similar to a huuuge fat cap, like 50 cm diameter... I was expecting just that in the end, but it didn't came.

Remove the pressure gauge and replace with a standard tire valve. Modern rogue did it to spray mustard. The gauge on the compressor is enough to tell you start pressure.

This is my most favorite way to paint. Literally almost get off on it

The old school chrome refillable fire extinguishers are the best

@marley1995

Жыл бұрын

I got one from 1995

you could make a fitting hole inside of the fire extinguisher and put a tirevalve inside of it. Mostly at every Gasstation you can put maybe 5bar of pressure inside of it. i think with more pressure you could paint with more details.

Rent an airless sprayer. They have lots of different tips and nozzles to paint with

Comic relief - meets - never give up = another great video!!

Try to fill it to the green, use a longer hose with a smaller diameter nozzle so you can aim a little easier, maybe put a strap on it so its not as heavy(heard you struggling with the wide hose) absolutely loved the video Doke! Hope to see a part 2

@CANControlGRAFFITI

2 жыл бұрын

Might as well make it a purse if your going to go to that level. Man up!

THIS HAS GOT TO BE ONE OF THE FUNNIEST THINGS IVE SEEN WATCHING HIM TRY TO OPEN IT AND RAGE BWAHGWAWHGAWJHBAWJHBA

try an high pressure cleaning pistol (pneumatic cleaning gun) for your compressor, it as a very similar function of fire extinguisher (it use venturi effect) but you can have a continous 4-6 Bar of pressure

I love how you crossed everybody’s throws with grey piss stains lol😂

Never thought of using a fire extinguisher for spray painting. I wonder what other wacky painting medians there are?

@mastertyreshredder

2 жыл бұрын

Weed killer sprayers Coke bottles with holes in lid Deodorant cans

Do half of watered down paint, 100+ psi(no more than 300) and flip it upside down before painting, makes it work like a charm

Wow. I spent the first half of the video wanting to jump on a plane to visit so I can show you how to do it without destroying the fire extinguisher. You also have to drill a hole and instal a bike pump valve (1 usd) on the side to fill it up with air to pressurize.

To fill the extinguisher you need like a bicycle type fill valve you may need some reducing fitting to adapt the extinguisher hole down to the fill valve. Then you just hook your air hose to it, fire up your compressor press the handle and fill to greenzone release handle remove air hose and fill valve attach hose and spary babay

This work better with a bigger extinguisher. You can have more air in it with the same volume of paint. Also a skinny nozzle at the end of the hose make for a longer throw. And finally I found that 140-150 psi bring the gauge right in the green and it makes for an amazing result lol

In the states we use chrome one's and they have like a tire valve to fill them with air.. They have a pressure gauge so you know how much air to put in it..

Actually crazy, have been searing around about this for a few days, for a friend ;) And now you just happend to upload!

Doke on fire 🔥🔥🔥 Get Extinguishers !! Quick!!

Your new hoodies look sick bro!👍

There is actually a easier method to achieve this kind of tag, there is a thing called the "Krink Sprayer" Which is 35$.

This needs a part 2

I agree with the dont use it part, its like shouting "im an idiot who does this shit"

That seemed like a colossal waste of time… but so much fun!! 🤣. Great video!

Maybe try a power washer that has paint? A power washer comes with multiple spray tips as well.

Have you heard of my Brother, Graffiti name is SKROE, SKROEZ and MONZ, My Brother is a UK graffiti writer who was doing Graffiti since the early 80s, My Uncle Acko actually started or was the first to do a piece where I live in 82-83, Graffiti history is live in my Family, I even do bits of Graffiti but my Brother skills is on another level, My Brother is known as the King Of Graffiti labeled by the Polish writers, A piece was done in Poland in remembrance of my Brother, I sadly lost My Brother Kevin in August of 2022, A huge loss to the Graffiti world here in the UK, My Brother is part of CVK, Cruel Vapour Kru, With HOXE, RMER, and a few others, I know HOXE and RMER won't mind me sticking up their graffiti name, People do legal now anyways, Not many actually do out spraying pieces or throw ups, The work that isn't legal is not worth the head stress anymore, Though people still go done the lines throwing up little pieces, And if the writer is crap then it just looks like vandalism, lol..... But yeah My Brother's graffiti legacy is strong, I will send you a link of some of my Brothers Graffiti work, But if you put in SKROEZ graffiti writer I am sure my Brothers blogging page is still up.... A fire extinguisher would be good for filling in big pieces lol.... Reminds me of the dude KRINK, Who does drips and calls it art, lol, Each to their own, I am into wild style myself, Rather than drips, lol.... I might do some graffiti sketches next week, Got a bit of Sim Racing to do, But I do want to get into a bit of Graffiti, Relaxation at it's best, A bunch of Hip Hop beats playing, And get on some Graff sketching....

One of your best videos ever mate... i had a good laugh, simply magnificent

7:11 - That's the best Dr Evil 'Bratislavian'/Slovak evil laugh I have ever heard.

Garden sprays beat extinguishers all day in my opinion, beats all the hassle of pressurizing them filling them etc! You can get 50L garden sprayers on wheels with a manual hand pump built in!

Thanks for the tuto!

Tip: vide grips would perfect to take off the nozzle of extinguisher. That’s my go to tool.

If there was some way to attach a fat cap to the extinguisher it would be monstrous! Love the videos btw :)

The dedication

I havent laughed this much in a while. Thank you so much Doke :D I think its just called vandalism at this point 🤣😂

ah you gotta do more videos with this it has huge potential!

i love that you left in all the hassle to open it. i did laugh when i saw that teeny tiny vice of yours though

There needs to be something like this with straps, that way you can wear it like a backpack. Then have a longer hose and some way to hit the trigger.

"That seems like a big bullshit" best quote ever

Bro..I recommend you get the silver or chrome looking fire extinguisher,they are the best for what you need..I'd like to thank GUFE & BUKET for providing me with my first back in 06..

@marley1995

Жыл бұрын

Damn you from California or Vegas? Gufe is up on the way to Nevada from LA.. and buket killed it here before he got locked up. Dude was a killer.

And yes you need a thinner nozzle for added pressure and you need to put much more pressure, at least to the middle of the green zone (100psi minimum), make sure you try again with these tips 😈

6:07 is the only time i think I’ve ever heard doke curse 😭😭

"Don't do this at home, now let me show you where you can get one of these.." 😂😂

I love your patience 😆

Inb4 the shoutout to 1UP. - edit. next time you want to empty a fireextinguisher in a controlled fashion. Use a pillowsheet, dump the hose into it and close the opening around the hose with your hand. You can release the preassure while keeping the content somewhat secure inside the pillow-wrap. And yes, tap it with a hammer when you want to unscrew the top, or use some type of impactdriver.. The taps is the better way. Dont hit it hard, but hit it multible times instead. And make sure the container have the same temperature all the way in. If the can/container is cold and the nozzle is warm then you have a way too tight grip around it. Make sure the container is somewhat warm when compared to the valve. AAAndd . since i mentioned 1UP, then its kinda in its place to end this post in the other end of the scale. When doing legal grafitti then you should have some kind of protective layer at the buttom of the wall. Some roll-out so you dont paint the ground

Try getting a screw on compressor attachment to fill it with how the hose attaches. May be easier to get a high pressure in the can

The excitement you had was awesome

What was in the fire extinguisher before trying this, the valves are different a water extinguisher uses a spray nozel, powder ones will have a jet nozel

They make a little schrader valve adapter that screws into where the hose connects. Makes it easier to pressurize. It’s 6$ usd on eBay.

@connorvasey1

Жыл бұрын

just made my life easier thankyou! OGER

I have been waiting so long for this🤘🤘🤘

Probably late to comment this but drill and tap a vale on the actual tank and you can just hook up to that and get better pressure and it will make it super easy. (I built a flamethrower this way). I really hope you get around to reading this I absolutely have always loved this channel keep up the absolutely beautiful art man!!

I opened an empty fire extinguisher when I was a kid, and it almost blew my head off. 💯💯💯💯

you should pressurise the tanks till there int he green area and you also don't always have to hold down the handle and you can get a fitting for converting the thread on the air compressor tot he same size thread as the hose and pressurise till you just about to get on the high pressure side of green on that gauge 100-110psi is what id fill and 8 litre extinguisher to and i normally only half fill with 4-5L of paint in an 8L extinguisher

would having an attachment on the hose tip like they use for indoor air spraying help for a cleaner look?

I’m curious the difference in pressure between a regular can and a can of silly string

The best part of this video is him trying to open the fire extinguisher 😂

Pro tip get the silver fire extinguishers. They have a valve to pressurize them already on them and they are filled with water. Easy pick up from a car wash...

You can acctually make dry ice with that if u spray it in like a potatoe or like fabric bag

Cool Projekt! I Hope in Retroperspektive you had fun with this project😊

I really wanted to buy your merch, but sadly i live in Brazil and it doesn't ship to here :c

"so powerful! so exiting! so evil!" :D

Easily the coolest video that you've made. It doesn't have much purpose for the usual muralist and for that reason it seems the most true to graffiti.

If you get a tyre valve and glue it to the threaded opening of the extinguisher you can put much more pressure in it

when trying to open it I would use the cold from it decompressing and then heat the top of the can... but that is not something most will think of in the moment.

I’ve been waiting for this for so long