Painting the Silver Surfer / How to Paint Chrome Models | Groundeffected.com
I wanted to show how to create a chrome effect that's really effective and easy to do and so this video shows how I made the effect and also Some other tips for painting 3d printed models
3d wicked Patreon: / 3dwicked
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected...
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected...
🎨 Supplies: elementgames.c...
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Tenacious for Strengthening Prints: amzn.to/3CTSU6X
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
....
vm.tiktok.com/...
📌 Playlists to Watch!
Brush Control:
• Brush control
3D Printing:
• 3D printing
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
How to change FEP sheet for resin 3D printer
• How to change FEP shee...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my KZread channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected
Пікірлер: 107
You can use aqua gloss from alclad to clear coat the molito. It knocks back the shine a slight bit, but you can handle it the same day.
@Groundeffected
2 жыл бұрын
I have tried that. But if you don’t let it dry long enough it will make the shine dull I’ve found the resistance is good enough on the molotow once cured though.
So glad I found this channel. Such great work and a fantastic time watching. Love your stuff!
@Groundeffected
2 жыл бұрын
Thank you my dude. And welcome.
Great job as always Brent. FYI Tamiya paints come in both acrylic & lacquer, the X series is lacquer and the XF series is acrylic. I just watched a video from a modeler who compared Molotov to AK Super Chrome and GSW Chrome and GSW was the clear winner. It gave the same finish but with less drying time and it can be handled after its dried. Going to give it a try myself!
@Groundeffected
2 жыл бұрын
I tried the gsw one as well. I found the molotow to be shinier. And it’s touchable but after a few months once you’ve forgot about doing it hahaha 🤣
@anthonyflynn2662
7 ай бұрын
@@Groundeffected well thats me told, i was gonna try that molatow one lol
Awesome work! Absolutely mindblowing 🤯
@Groundeffected
2 жыл бұрын
Thank you very much.
The Wizard of Art, awesome dude.
@Groundeffected
2 жыл бұрын
Haha thanks bruh.
Congrats! The statue looks incredible.
@Groundeffected
2 жыл бұрын
Thank you dude.
I'll most certainly give it a try. I did a Quicksilver from Silverhawks last year, but the clear coat darkened the chrome, and kind of dulled it a little. I didn't use molotov cause I could not find it near and affordable. I said on the clock app chrome was the bane of my existence...😆
@Groundeffected
2 жыл бұрын
Yea molotow works well just needs like ages to dry
Another magical job by the wizard himself.
@Groundeffected
2 жыл бұрын
Haha thank you. I do have almost the beard of a wizard.
@Darknynja2
2 жыл бұрын
You can call yourself Bendalf the Coloror. The wizard that gives life to the uncolored. That almost sounds politically incorrect. But you get it. 😁
that's sick looks amazing
@Groundeffected
2 жыл бұрын
Thank you bruh.
Pure epicness bud. Redemption all the way.
@Groundeffected
2 жыл бұрын
Aha man thank you!!
Amazing work brother! Keep grinding!
@Groundeffected
2 жыл бұрын
Thanks bruh. The grind is real!!
impressive! thanks for the chrome tip
@Groundeffected
2 жыл бұрын
Thanks for watching dude.
Just subbed to your channel brotha!! Great advice An awesome tutorials 🤘🏽🤘🏽
@Groundeffected
2 жыл бұрын
Thanks my dude.
What can I say? I saw you vid and thought time to put the kettle on and enjoy :) Ive just got the surfer file to print so this video is bang on topic for me. Thanks bro top video as always :)
@Groundeffected
2 жыл бұрын
Heck yea. Thanks for watching my dude!!
@dr-onestuffido
2 жыл бұрын
@@Groundeffected Thanks for taking the time to guide us :)
Cosmic level!
@Groundeffected
2 жыл бұрын
Out of the world or just within our universe level?
@unameableone
2 жыл бұрын
@@Groundeffected Ultimates level Buddy!
Tempted to try this
@Groundeffected
Жыл бұрын
It’s not bad. Just takes long to dry.
Dope dude loved it. 👍👍👍👍👍👊
@Groundeffected
2 жыл бұрын
Thank you bruh!!!
I think the molotow is an ink and not a acrylic , because their are two brands of molotow that they make one for acrylic pens and one for regular pens .
@Groundeffected
2 жыл бұрын
Yea makes sense. I still don’t know what the liquid gold is though hahaha
Great video, bro!!
@Groundeffected
2 жыл бұрын
Thanks so much my dude.
Great job on this. Question: I failed to see where Thor's hammer is on this kit.
wonderful as always
@Groundeffected
2 жыл бұрын
Thanks my dude.
Awesome!
@Groundeffected
2 жыл бұрын
Thank you
Yoooooh, this looks lekker boet
@Groundeffected
2 жыл бұрын
Thanks bruh!
I'm using this technique(which is super dope btw) on some metal for Magneto (6 inch scale dio), Did you use any extender/reducer? I'm not sure if it's b/c I am using the marker vs refill or if they changed any ingredients but it seems to start chunking up in my airbrush with chrome bits pretty quickly, I'm having to clean it quite often, which is a total nightmare btw. Perhaps the time it takes me to transfer out of the marker, into a dropper, and into my brush allows it to dry? Idk, any advice would be helpful though, thanks!
Can you use gloss black as base instead of black and then clear?
@Groundeffected
2 жыл бұрын
Yes. Definitely I just don’t have a gloss black but that would totally work. To be honest just plain resin still does a almost identical job.
great video. I'm getting ready to do my Silver Surfer soon. Question, What glue do you use?
@Groundeffected
2 жыл бұрын
I use medium ca (cyanoacrylate) but if it needs a good solid bond and is heavy best to use 2 part epoxy
i watched a video from some model painter the other day and they tried the mirroriest paint by culture hustle and i said in the comments that it looked like the silver and gold paint thats in marker pens. dont know if you have heard of it.
@Groundeffected
2 жыл бұрын
It might be a very similar thing. This molotow is pretty dang shiny though it’s a bit crappy to work with as it does take a while to dry but the results are amazing!!
One question: while leaving it to dry, should I cover the piece with like a box or something, to avoid dust?
@Groundeffected
2 жыл бұрын
That’s a good idea. Just so you don’t get that stupid dust that manifests out of thin air hahaha
Just subscribed awesome stuff your creating 👍just wondering could you get a good finish on any model without spraying . Hand painting everything?
@Groundeffected
2 жыл бұрын
Yes kzread.info/dash/bejne/kXhrtdulcam-gtY.html watch this one
would inks have done the same job as the tamiya blue over the metal?
@Groundeffected
2 жыл бұрын
Um. Yea if you have one that’s a bit more glossy. Some inks have a matt medium in them and that wouldn’t make the effect you’re looking for. Wish I had purple for this but I had blue felt like it was a good choice at the time. I accept my choices even though I wished I chose different. Lol
What do you use to clean overspray from your hands?
@Groundeffected
2 жыл бұрын
A nail brush and hand soap. I scrub my hands like 10 times a day still can’t get most the paint out from under my nails sometimes haha
what is a good uv power % for the mono x for translucent resin?
How did you clean the chrome off your airbrush did you use isopropyl alcohol And what’s the percentage of the alcohol ps I have been told that alcohol messes with the gaskets of the airbrush
@Groundeffected
2 жыл бұрын
I use alcohol. Perhaps cheaper airbrushes would have that issue I personally have never had that issue with mine though.
Did you seal the chrome after it had dried
@Groundeffected
2 жыл бұрын
No. It fills it no matter what I use. Even using the Alclad clear so I left it and to be honest the paint doesn’t just rub off it’s got a solid hold on the model.
did it take the whole refill bottle to do Surfer?
@Groundeffected
2 жыл бұрын
Depending on the scale you print him it could easily take the whole bottle mine was small so it only used a tiny bit of paint.
Very nice! Did you have to thin the chrome in the airbrush?
@Groundeffected
2 жыл бұрын
Nope it sprays perfectly through even my 0.03 nozzle.
That's beatiful.. Also made me wonder if you've tried the Mirror paint?
@Groundeffected
2 жыл бұрын
No I haven’t. Totally should get some to try.
Have you got a link for the chrome refill???
Brent, how long did you wait for the chrome to dry before using the blue tint? I want to use it to do C-3PO.
Amazing work as always.. Can you tell me what type of brushes do you use.. Does it come in set or you buy one by one..? Thanks!
@Groundeffected
2 жыл бұрын
I use Windsor and Newton cotman series brushes. I haven’t seen them in a set. Just get 0000 ; 2 ; 4 ; 6 ; 8 sizes are a great starting point.
@marijanmajacic6136
2 жыл бұрын
Thanks for answer!
that chrome stuff is bloody expensive over here
How can i buy this one?
@Groundeffected
2 жыл бұрын
This one isn’t for sale. But you can email me for more info on Info@groundeffected.com
🤩tout simplement magnifique ou peux t on trouver le fichier je voudrais essayer bravo et hate de voir ta prochaine oeuvre
For the clear blue, did you put a top coat over it or it's a top coat itself? I'm glad to see the lacquered thinner didn't react with the Molotov paint. I will be doing the same thing as you. Solid advise on not touching it for awhile.
@Groundeffected
2 жыл бұрын
No coat on top before the blue. Just let the blue go on. My thought was that it would blend with the coat of chrome rather than sit on top of it.
How small did you scale this? I'll have to try it myself. 😍
@Groundeffected
2 жыл бұрын
I don’t remember exactly but I think around 40% or there abouts perhaps a bit smaller
Never use Molotow Chrome, I have a piece I painted months ago and it rubs off, use Green Stuff World Chrome Brush version with an airbrush. Once it dries it’s ready to go, looks just like Molotow.
@Groundeffected
2 жыл бұрын
Maybe your prep wasn’t right for it? It’s rock solid on all my models couldn’t rub this off even if you tried it dries really hard. I have green stuff chrome it was ok but can’t be polished like the molotow can. I’ve shipped many models with molotow on swords etc, it needs a week to dry but when it’s dry it’s rock hard defo can’t just rub it off.
@TheIcemanModdeler
2 жыл бұрын
@@Groundeffected I just poured it in the airbrush and applied it heavy, dont remember if i thinned it with IPA but it rubs off regardless how many weeks or months i let it set and a lot of people have the same problem with it.
@Groundeffected
2 жыл бұрын
@@TheIcemanModdeler yea I don’t Know what you’re doing differently cos I do it exactly the same and you not getting it off the model unless you physically scrape it with a knife. Even then it’s not easy to come off. Painted swords and blades that were wrapped and sent in post many times not had a single complaint about paint rubbing off. And the silver surfers I’ve painted are solid chrome with no chance of rubbing off and I didn’t even clear coat it. I never thinned it at all.
@TheIcemanModdeler
2 жыл бұрын
@@Groundeffected I dont remember but does it work directly in a 0.5 needle? I always use Duplicolor primer, maybe it's not sticking to that. Got one unopened marker left over so i'll do another test on different objects and spoons but like i mentioned, other people have the same issue with it. Weather is also a factor.
@Groundeffected
2 жыл бұрын
@@TheIcemanModdeler I live in England so it’s humid and the weather sucks hahaha for a base I used Vallejo surface primer and sprayed the molotow through .5 needle it flows easy no blocking or tip drying either o do layer it liberally and then don’t touch it for a week or longer cos it takes ages to fully dry and then when I do touch it and it leaves finger prints I just polish with a cloth ( mostly just my Tshirt)
Tamyia are realy acrylaques. They're and acrylic/lacquer blend which is why you can thin with lacquer thinner and acrylic thinners. I use Mr. Color thinner to thin Tamyia paints and then they act like a lacquer paint. They do take a little longer to dry but they atomize and spray a he'll of alot better thinned with lacquer thinner. Painting chrome sucks and I stay away from it at all costs. Lol
@Groundeffected
2 жыл бұрын
That’s good info. I knew it wasn’t a proper acrylic because of how it behaves. I figured it was more of a lacquer hence the use of lacquer thinners but that probably was luck back when I tried it at first hahaha. Man if I’m gonna do chrome again it’s gotto be like a 2 month project. Paint the chrome and forget about it for 2 months. But also needs a vacuum to be kept it because dust omg dust would be a nightmare. Hahaha thanks for watching again my dude. Love your input too!!
Molotow needs 2 weeks to cure.
@Groundeffected
2 жыл бұрын
You spelled months wrong ahahaha for real it needs long to cure and if you spray it thick years hahaha but it does cure and it is solid when it’s done
@jasoncombs3232
2 жыл бұрын
@@Groundeffected 🤣 🤣 🤣
The chromiest ever......what happened to the hammer?
@Groundeffected
2 жыл бұрын
For real the chromiest ever !!
@Groundeffected
2 жыл бұрын
The whole statue took a tumble and I wasn’t able to shoot the hammer in his hand before I smashed it lol.
@outlawfpv3792
2 жыл бұрын
@@Groundeffected fair enough lol
First again
@Groundeffected
2 жыл бұрын
Good lad. Gonna have to take away the championship belt from hicontrast
@hicontrast
2 жыл бұрын
I have allowed the peons a chance to feel good.