Been looking for a video like this as the whole house, door frames, bannister, window sills need doing. All were varnished 32 years ago!

@Inexteriors

8 ай бұрын

Thankyou very much watching.

Nice vid Steven 👍

@Inexteriors

Жыл бұрын

@Orbitalforest . Thankyou Very much.

Good video mate have a good bank holiday

@Inexteriors

Жыл бұрын

@John Forsdyke . Thankyou Very much. Enjoy your bank holiday.

B.I.N shellac is the only thing for varnish imo,it stops peeling and reduces chips.Other primers don't do this, especially on a staircase and trim.I have done a LOT of houses at this point, going from varnish back to white,also there is a lot of extra work like filling sap and knots also a lot of caulking.

@Inexteriors

6 ай бұрын

It is good stuff, and it dries fast.

Thanks for this. I used Brewer’s Albany ‘Super’ Primer Undercoat over keyed varnished wood and then oil base Dulux Trade Eggshell. It has been cold and a bit damp but I can scratch the coatings off with my thumb nail? Have I made a mistake or do I just have to wait a few more days for it to cure? With many thanks, Alex

@Inexteriors

Жыл бұрын

Wait at least 30 days, then scratch test again. it can take ages for paint to fully cure. Let me know the result in 30 days.

Where are your "Happy Knees" Knee pads ? Handy video BTW. Thank you!.

@Inexteriors

8 күн бұрын

I know lol.

Hi Steven. Great Video. I have a varnished staircase that the wife want white gloss on instead. It that a wise move. Can I do this with the same method. Rub down, Zinzer, then gloss it?

@Inexteriors

10 ай бұрын

Sorry for late reply, been on holiday, internet was poor. Zinsser bin, then undercoat and 2 top coats, if you are using water based paints.

How soon should you take off the frog tape? When the paint is still slighly wet or fully dry?

@Inexteriors

Жыл бұрын

I took this up when it was dry, if you have finished you can take it up when you want.

Hi great video. I wanted to ask that when we paint over gloss varnish i have seen that the paint normally peals off after sometime therefore im really concerned before doing anything. Will not be easy to change rhe skirting boards and then paint. Please help me out as im not good at diy. Thank u

@Inexteriors

5 ай бұрын

If you want to put new on and start afresh thats good, or follow these steps use a good durable paint and you will be fine.

@Humansoul.

5 ай бұрын

@@Inexteriors thanks.

Hi Steven. Very informative videos. I just wanted to get your opinion on the Zinsser BIN and cover stain please. I painted some doors and architrave in our house. What I've found is that the paint has chipped slightly in a couple of places on the corners of both where the kids have hit off them with their toys. I've done all the proper prep work but I just thinking the Bin might be a bit brittle for areas that take knocks. My question is, what would you think of 1 coat of cover stain and 1 coat of Bin (for the knots) and then the undercoat and topcoat? Would the cover stain be more hard wearing and help with paint chipping slightly at the corners, in your professional opinion?

@Inexteriors

Жыл бұрын

Thankyou very much, to be honest i have never used the cover stain. i only started to use the zinsser products a couple of years ago. Zinsser bin i have used for water stains, exterior spot priming and covering varnish before undercoat and top coat.I think that any paint would chip jf hit hard enough, nothing is 100 percent. Also it does take at least 30 days for water based undercoats and top coats to fully harden. I did some reasearch on google here is what was said. Zinsser Cover Stain provides durability and adhesion on glossy glossy surfaces. It's especially good on raw wood or MDF removing the risk of swelling that you could get with the water based 123 primer. Zinsser BIN is the toughest with the highest adhesion although it does have the highest price tag.

@lw53777

Жыл бұрын

@@Inexteriors Thanks for your reply Steven. Much appreciated.

@leezeraloe3821

7 ай бұрын

Bin is good for stain blocking but not great in adhesion to varnish. It will always chip I'm afraid.

Great video. My house has (had) all brown varnished doors, skirtings, dados and staircase. I have had a painter and decorator in to paint all the woodwork white. I had 14 doors on my landing and he used a Johnstone's equivalent primer and sealer. I know he didn't sand down, as I suppose that would have cost a fortune for that many doors and woodwork., He read the label and it said it creates a really good bond, however, I only have to knock any of the doors or skirting for it to chip and I am often having to get the paint out to touch up the chipped bits, which is annoying. I am decorating one room at the moment on my own and have sanded down all the skirting boards and the door, so that will be interesting to see what happens when I have finished. I need to get a stain blocker and primer. You recommend the Zinser Bin, shellac version, but what do you think about the Zinsser 123, water based version. I don't want to get the wrong one. Your advice would be very helpful. Going to have to live with what the decorator did and he is a friend's husband, so can't really complain.....

@Inexteriors

7 ай бұрын

The zinsser bin is a shellac based paint that dries fast and enables you to get on. and you can use water based undercoat and top coat, the 123 is water based and wont seal it, you can use oil based undercoat and top coat, it just means waiting a day beetween each coat.

@JennyD234

7 ай бұрын

Thank you for your prompt reply. Bin it is then 😊

Hello, I have pine varnished doors, do I need to sand all the varnish off completely and then apply zinner

@Inexteriors

Жыл бұрын

No, Just give a good once over.

@newday4936

Жыл бұрын

@@Inexteriors thank you for replying

Hi Steve, love your videos, im a handyman and i have a job coming up and could do with your advise, i have to paint over a wallpapered wall that is stuck down well but i dont want the wallpaper pattern bleeding through the paint. Im going to use johnstones covaplus mixed in a light colour, i was thinking of using zinsser wallpaper coverup, but i read the reviews and people say it is really smelly, any advise please, plus what would you use on the ceiling, it is a through lounge, thanks Kevin

@Inexteriors

Жыл бұрын

Thankyou very much. Try painting a test patch first to see how it covers, if the paper bleeds through the paint then use the zinsser wall paper cover up, if it all looks good then proceed with out using the zinsser wallpaper cover up. this video might help, i use Johnston's cover plus matt for most celings, also there is a johstones perfect matt that is very expensive. kzread.info/dash/bejne/qH2Fxa5yna24oto.html

Hi Steve, I've accidentally haphazardly got osmo polyx oil on primed mdf skirt boards (approx 6 months ago) how do you recommend I go about either removing this or going over it? Ta

@Inexteriors

Жыл бұрын

Are the fully coated, or is i drips here and there.

@katebeer163

Жыл бұрын

@@Inexteriors its drips/paint brushes here and there. I've picked up some zinsser 123 bullseye. Will this cover it? Or am I better off trying methylated spirits to try remove it first?

@Inexteriors

Жыл бұрын

To be honest i have never come across this situation, I would sand and try and remove the affected areas first then clean, i would then spot up with the zinsser bin, also you can try bedec multi surface paint. Please let me know how you get on, and how you sorted it.

Your skirting looks amazing. Ive just moved and i stripped the skirtings as they were a mess. Found varnish under all the gloss and a load of plaster. Its been so stressful. I stripped, sanded and used 2 coats of primer (never knew about zinzer) ive still to gloss. Have all my efforts been in vain without the zinzer?

@Inexteriors

4 ай бұрын

just get some zinsser on them know then you will be fine, sometimes you have to go one step backwards to move forward again, make sure to get zinsser bin.

@emmaleebarnes1376

4 ай бұрын

@@Inexteriors thanks I will get these skirtings done eventually. Its put me off stripping the rest of my skirtings even though they're a total mess. I can't afford to replace.

@Inexteriors

4 ай бұрын

​@@emmaleebarnes1376 you will get there in the end.

Hi, I’ve just painted a standard varnished fire door, it was well sanded down and dusted off. I’ve painted it with three coats of Zinser 123 and I am still getting yellow come through on the undercoat when I apply the gloss will the yellow still come through any help would be much appreciated.

@Inexteriors

2 ай бұрын

Zinnser Bin is what you need not the 123.

@chunkypritchard2584

2 ай бұрын

Thanks very much for the quick reply, I will give that a try five more doors to do😂

@Inexteriors

2 ай бұрын

get the Zinnser bin in the red tin it is shallac based it does smell for a little while and dry fast. so open your windows a bit.

Can I just put an oil primar and oil based coat without the oil based under coat?

@Inexteriors

4 ай бұрын

oil primer,oil undercoat. oil top coat. if bare wood. 2 oil undercoats, then 1 top coat, if varnished wood. the under coat is the key to providing a good base for the top coat.

@raj080288

4 ай бұрын

@@Inexteriors amazing! Many thanks

Why did mine leak under the tape…I used light green tape..and pressed hard on the tape

@Inexteriors

4 ай бұрын

what surface was you masking. did you go up tight to the skirting.

Which paint glass or mat

@Inexteriors

9 ай бұрын

it was farrow and ball estate eggshell.

did you use oil based or normal paint on the skirting board?

@Inexteriors

8 ай бұрын

i used water based.

@raj080288

8 ай бұрын

@@Inexteriors I assume that is just normal paint? Lol

@Inexteriors

8 ай бұрын

@@raj080288 You get oil based and water based buddy.

@raj080288

8 ай бұрын

@@Inexteriors thanks mate

find that aluminium primer is the best for all bare timber. bedec have got a new primer out called all primer does knots etc everything the shellack does but water based

@Inexteriors

8 ай бұрын

That sounds great water basesd, zinsser have brought out a water based bin i see, i have never used aluminium primer.

@jackwardley3626

8 ай бұрын

@@Inexteriors The bedec all primer is like £30 cheaper for 5 litres and does more ferrous and non ferrous metal to and knots. aluminium primer is the bee's knees for all timber and old bitumen cresoste surfaces the best for knots also but we want a water based primer that can do everything make a better living

@Inexteriors

8 ай бұрын

@@jackwardley3626 I will check it all out, You are loving the Bedec buddy. Thankyou for engaging with the channel.

Hello. Could you please give me your best advice on choosing the most durable water based for my wooden framed windows? Using 80 grit sandpaper I spent hours & days hand sanding x 4 wooden sash window frames. I sanded off old layers of yellowed gloss leaving behind a thin layer of gloss which I can now see the wood grain through. I now have trust issues finding the most durable water based paints for my interior. I want to be 100% sure I am choosing the right paint system so I don't have to re-do all my efforts ? I am new to water based paints. So how would I go about this ? Do I need to prime ? uncoat ? Please tell me the most professional trustworthy durable pants recommended with the longest lasting effect ? Regards Micheal

@Inexteriors

4 ай бұрын

Bedec multi surface paint is a good one, so is the zinnser allcoat, but most say the bedec multi surface paint is better. there are others but these have really impressed me, i have only been playing with the water based paints for about 6 years to be honest.

@bsfbestshortfilmsonyoutube

4 ай бұрын

@@Inexteriors Hey thanks for your advise. Yes I heard Bedec although I cannot get in any paint stores near me. I can try the Zisser allcoat even though Imany said Zisser it's like water and very thin . I see what primer workd best for Zisser

@Inexteriors

4 ай бұрын

Try online for the bedec, or do you have a brewers near you. Let me know what you end up using. i found the allcoat good to be fair.

@bsfbestshortfilmsonyoutube

4 ай бұрын

@@Inexteriors I keep running into Bedec as being the assured winner from professional painters. It will cost me twice as much with delivery but if it's trustworthy and I can reply I have the best durable paint. Bedec it is . For my doors I am using AG as I can buy it here. is it Bedec Multi-Surface Satin Paint ? I like to use Satin. is this the one ? I will try buy online.

@Inexteriors

4 ай бұрын

​@@bsfbestshortfilmsonyoutube Yes it is bedec multi surface paint. why dont you use the same paint as the doors.

Dodgy looking electrical socket there

@Inexteriors

2 ай бұрын

The cleaned up well lol.

Hi I'm still confused. We moved into a house where the previous owner has gone crazy with varnished pine everywhere lol I need to paint the cladding in the kitchen white (it's presently varnished) and the bannisters. I've got paint stripper and gloss dulux white paint. Will that do the job? Or Do I Sand, dust, then use Zimmer 123 stain killer and then the gloss on top? Sounds like a lot of work! Can't it be done alot more easier than that. I hate varnished and I'm 31 weeks pregnant. we need the house completed ASAP. Lol please help.

@Inexteriors

Жыл бұрын

The zinsser bin is a shellac based paint used to block any staining or yellowing bleeding through the white top coat when using water based undercoat and top coat, The advantage being it all dries fast, the bin does smell a bit, but not for long, the water based undercoat and top coat has hardly any smell. Or you can use oil based undercoat and top coat, you would need to give it 2 oil undercoats then a top coat. You would have to wait a day inbeetween each coat as it will take a day to dry, and all oil based paint smells lol.

@fluffy00123x

Жыл бұрын

@Inexteriorstv thanks, so much for replying- so what is a water based undercoat and what is a oil based top coat? Examples? Is the zimmer 123 bin a water based undercoat? Could I use that then put dulux gloss on top?

@Inexteriors

Жыл бұрын

The zinsser bin is shallac based, then use a water based undercoat then a water based gloss 2 coats. you could probably use the zinsser 123 as an undercoat, but make sure you use the zinsser bin first on the bare pine, 2 coats of bin would be even better just to make sure.

@fluffy00123x

Жыл бұрын

@Inexteriorstv ok Brill thanks so I will use zinser red tin 2 times after quick sanding of the wood. Can I not just go direct to dulux gloss after? Or does it have to be a water based topcoat ? I think the dulux gloss I have is water based....

@Inexteriors

Жыл бұрын

@zoya5473 I would put the bullseye 123 before glossing, to give the gloss a good base, i put knotting on just to make sure, you dont have to the zinsser bin should take care of that. To be honest i am still learning about the zinsser products, they are good. Also you could do a sample and see what it looks like glossed on top of the zinseer bin. Let me know how you get on good luck.