Yikes how did I miss this one! I'm glad I went back to refresh some technics

Just so you know...each row of brick or block is called a coarse. Each line between the bricks or blocks is called a joint. Just a tiny tip of information from a former brick Mason who also loves art.

@OilersWorkshop

8 ай бұрын

Neat

Holy **** wow, that's realistic brickwork! Good enough to use for hi-end wargaming! Man I can't wait for the AT-AT!

@OilersWorkshop

Жыл бұрын

Me either

Excellent work, that brick wall and door would be perfect for an automotive diorama I'd like to do. I love the backdrop of an old garage.

@OilersWorkshop

Жыл бұрын

Awesome! Thank you yes this would vibe well with nice cars

I’ve tried for ages to work the word “verisimilitude” into use. Your lateral, horizontal brush strokes lends verisimilitude to your diorama. Bravo!!

@OilersWorkshop

Жыл бұрын

Lol, success!

Amazing, the level of detail and realism is so incredible you can really just enjoy looking at the piece over and over.

@OilersWorkshop

11 ай бұрын

Thank you so much

You are a great teacher. Very clear and contextual. nice work!

@OilersWorkshop

Жыл бұрын

Thank you

I tried to make darker joints with gray wall filler and a bit of black paint. The other tutorials advise a paper towel wipe. But your damp towel method made things way better and easier. Thanks!

@OilersWorkshop

3 ай бұрын

I’m glad it worked out for you 😄

I love the wall plus the painting technique was awesome. I want to try this . Thanks so much for inspiring me.

That was awesome, thank you so much 😊 ❤

@OilersWorkshop

2 ай бұрын

Glad you enjoyed it!

It looks so real. Hard to believe it’s foam. Great work!

@OilersWorkshop

Жыл бұрын

Thanks

I bought a wood burning tool for this very project, and wow I love using it for the lines. Very clean lines and no mess with the blade. In saying that, awesome looking wall! Great work!

@OilersWorkshop

Жыл бұрын

Thank you so much! Yes I love using my wood burning kit on foam

Love it, looking great.

@OilersWorkshop

Жыл бұрын

Thanks

I tried your method for my first time brick wall and it turned out really good! Thanks!!

@OilersWorkshop

Жыл бұрын

YES!!! amazing I’m so glad

Outstanding tutorial. Thank you

@OilersWorkshop

Жыл бұрын

Thank you

I use gel acrylic medium paste...but I bet the spackling is cheaper and may be easier to use a a grout/mortar material in between the bricks.

@OilersWorkshop

29 күн бұрын

There is thousands of methods, just depends on what works for you and the results plus cost etc

@kjjohnson-cr1r565

28 күн бұрын

@@OilersWorkshop Definitely, I just happen to see a lot of realism in your tutorials on concrete and brick painting. I usually look at a few tutorials but yours are extremely well presented and take some of the stress off of that first attempt. Thank you very much. I would love to see maybe a dio of the month like you used to do before.

Love your work! You're an inspiration! I'm going to have to try this technique out the next time I'm doing brick work.

@OilersWorkshop

Жыл бұрын

Thank you! Do it!

Was working on a wall this week as well! Thank you for sharing a process and very great techniques I want to try with future projects!

@OilersWorkshop

Жыл бұрын

Awesome

Excelent work! 👏🏻👏🏻

@OilersWorkshop

Жыл бұрын

Thanks

👏😎 excellent tutorial 👍

@OilersWorkshop

Жыл бұрын

Thanks

Super cool!!

@OilersWorkshop

Жыл бұрын

😄

incredible work, for a fabulous end result ❤️🍻

@OilersWorkshop

Жыл бұрын

Thank so much man

awesome work, per usual!

@OilersWorkshop

Жыл бұрын

Thanks man

Magnifique rendu 🤩👍je me suis abonné

@OilersWorkshop

Жыл бұрын

Thank you

I’m always in a hurry too. I use a hairdryer to speed up the drying process. I don’t dry it completely just enough to get it to a point when I’m wiping down not as much of the color is wiped off with the micro cloth.

@OilersWorkshop

Жыл бұрын

Sure, all my styles come from working fast

Nice. Is that facade from one sheet or did you apply some of the protruding details like the archway? Thanks.

@OilersWorkshop

4 ай бұрын

Both!

Amazing informative video! Would it be OK to seal with say a future acrylic floor finish, or would that be too glossy? I'm thinking the spackle would negate that gloss anyway. Or maybe just use a matte acrylic sealer? Thanks

@OilersWorkshop

2 ай бұрын

You can use matte acrylic but just be aware water based sealer over water based paint with water based spackle can cause reconstitution of paints and smear, so just experiment on a small test piece first

I really like the color of the brick. Do you remember the ratio of colors when you mixed them? Also, thank you for the content

@OilersWorkshop

Жыл бұрын

I’m sorry I don’t recall. I do that by feel

I love all of your work, nan!! I sit here and see all your videos so I can learn & use in my dio’s… do you mind telling me the measurements for this wall, please? Both the length & width, but also the size of the bricks, please? I see that they’re not the regular 0.5 inch by 1 inch… at least to me it doesn’t look that way, I could be wrong… Also, if I can suggest a “how to” video on how you design & cut those accents & archway please? Thanks again

@OilersWorkshop

Жыл бұрын

Thanks man, the bricks are 1/4 inch tall I don’t know what the dimensions are lol should be about 22wide by 14 tall, I encourage you to start with a door size (3x7) and then extrapolate from there to get measurements your comfortable with, the arch is just carved on n a separate piece of foam and then cut off and glued on, really straightforward

Hey the build looks great!! Just wanted to ask what your dimensions were for the bricks. Thanks!

@OilersWorkshop

Жыл бұрын

5/16x5/8

Do you seal the foam first before your flat black? Not sure if I missed it if you mentioned that step.

@OilersWorkshop

Жыл бұрын

Not necessary at all unless you’re using a caustic paint. I’m using brush on acrylic

Wipe on, wipe off, Oiler San.

@OilersWorkshop

Жыл бұрын

Lol sure why not 🤷🏻‍♂️

fabulous work! the arch bricks and the others that were not part of the wall per se, but decorative - how did you make those? is there a video where you created the wall itself, specifically the arch?

@OilersWorkshop

Жыл бұрын

Just cut them out separately and glued them on, no video

There a video of how you made the wall?

@OilersWorkshop

6 ай бұрын

I say at the beginning how and there is a series I do called art in real time where I showed the technique live, the first episode of that diorama the Chinatown diorama is available there, the other 16hours is in my members only section. I’ll do a JUST brick carving video eventually also but for now that’s what’s here on the channel

How do you create the protruding areas? Like the brickwork along the building? Thinner foam? I can only find the insulation foam in 1” thickness. I build ww2 1:18 dioramas. I’m a beginner, but already selling them quite fast.

@OilersWorkshop

Жыл бұрын

Wow I wish I sold mine fast lol, you just have to cut the foam thinner my man.

@Drew_L.209

Жыл бұрын

@@OilersWorkshopthey’re no where near as good as yours. But I make mine ww2 1:18, and they sell very quickly. Would getting thinner foam and gluing on top be ok? Thanks.

@OilersWorkshop

Жыл бұрын

@@Drew_L.209 I don’t see why not

And what kind of material do you use, what is the best i can use, and were can i get it?

@OilersWorkshop

8 ай бұрын

Watch my diorama supply shopping video #1 it shows you exactly where to do and what to get, there is also a link in the description for ordering some smaller 12x12 pieces of the same foam I use

Can I build something like this using blue foam??? I mean it's working with blue foam???

@OilersWorkshop

7 ай бұрын

YES

How did you create the arch?

@OilersWorkshop

Жыл бұрын

I cut it out of another piece of foam and glued it on 🤷🏻‍♂️ it’s just a knife and glue, really not that hard at all

Can I use modell plaster the same way?

@OilersWorkshop

7 ай бұрын

I have no idea what specific brand or thickness it is but, I would say probably not, because it’s too water based, but you should try it on a sample piece and see how it goess

@hjula87

7 ай бұрын

@@OilersWorkshop cheers m8. Awesome job btw

By accident I forgot to paint it black first so what do I do?

@OilersWorkshop

11 ай бұрын

Just keep going and learn from the results, you might like the way it turns out, not every brick needs to be done with a black undercoat, although some primer or flat base coat is preferable, sometimes it’s fine without it too. Just keep going and see how it looks

@jessicadelgado6032

11 ай бұрын

It actually looks really good thanks for the advise and thank you for the video👌