Get your Discounted Vacuum Here! Product Link: bit.ly/3T3jnbS 10% Discount code: PaintSocietyGV

@kf91274

3 ай бұрын

Uummm, idk what dyi people this channel is targeting but 3k for a spray system isn't DIY lol. Gtfoh.

Don't over think it, it's just paint! But for real man, that sucks. I feel for you. On the bright side, you can turn fixing it into another video, so there's that I guess. I appreciate that you don't hide mistakes or oopsies, and give your audience a genuine DIY experience. Every project I have done has had one thing or another go wrong on it. Thank you Brian, and keep up the hussle!

I’ve been a huge fan of this channel for quite some time. I personally have a Fuji 5 stage and run the Apollo 7700t on my unit. Ok m so glad that you’ve decide to share more turbine content. The outage sucks but now you have an opportunity to apply what you’ve learned in order to fix the set back. I look forward to the content as always. Thank you so much.

@tigerama778

3 ай бұрын

What do you mean when you say outage? Thanks

@Nino13084

3 ай бұрын

@@tigerama778 he said they had a power outage at his residence.

I used the Apollo 5 stage system and had no problem painting a complete 1973 Buick Riviera and a 1935 Chevy custom

I love the fact that Shawn was honest, and said that you would probably need a bigger system for complete paint jobs. I think I would go nuts, spraying that slow. I would be surprised if the clear at the beginning of the panel wasn’t dry by the time you get to the other end. Just my thinking. However, it looked gorgeous. Definitely takes patience. Brian, thanks for keeping it honest! I love your channel! Keep up the great work.

@rpb1961

4 ай бұрын

Turbine air is hot and dry. It can be done with extra slow reducer. It is a slooow process.

@BearBudgetTurbine

3 ай бұрын

Spraying slower is a fair trade-off if you are in a garage environment. Think of all the time and hours blocking a project car. What's a little more time when you are spraying to minimize fog in the air? I have also noticed Significant savings in material. 2 quarts of base to paint a smaller vehicle. Another huge plus if you are not a big shop. Lastly, I do completes with the turbines now. 4 stage Apollo for base works just fine. Then I switch to my 5 stage for heavier materials. I originally bought the 4 stage used(to test out system) then purchased a new 5 stage. I don't spray daily, so it works fine.

I use this system to paint the 50' catamarans we build. Yes, you can paint a car.

Once again, Brian great video. The system I bought over 30 years ago was Accuspray. The system I needed needed to be portable. And I fell in love with the unit they had. I've also have the Apollo 5 stage system and both work very, very well. The thing that I like about HVLP is that you can put down a near glass finish and have very little orange peel to sand out. Apollo is number one in the industry on HVLP right now. And I'm glad to hear they came out with a sixth stage turbine. Brian, sorry to see your power went out and screwed up your paint booth, but at least you're able to catch it on camera. HAHA.

I used an Apolo system in the mid 80s. The guns have come a long ways. Material transfer was great, just needed a 110 outlet and could paint anywhere.

what a great video like always , great job Brian , thank you for your time and sharing your knowledge 👏👏👏

And here it is, the video I’ve been waiting for 😂 keep it up! Man did that power outage suck

Great content as usual. I was blown away about the lack of overspray. Very cool. I was sick at the end when the booth deflated. I would’ve been throwing things. You have a great sense of humor. Enjoy your week.

@PaintSociety

4 ай бұрын

Cant cry over spilt milk but off camera i was pretty upset lol

@izzyplusplusplus1004

3 ай бұрын

​@@PaintSocietyseems some backup metal framing over your fresh parts or cars could be a nice upgrade.

I absolutely love these cool at home videos you do! Very cool

@PaintSociety

4 ай бұрын

The ending was hilarious

@speedokoterefinishnetwork4937

4 ай бұрын

@@PaintSociety dude I saw 🤣🤣🤣🤣🤣 THERE'S DRAWBACKS TO EVERYTHING!!!!!

Hmm I've been happy with my 5 stage Fuji turbine at 9psi but I may have to give this 6 stage 11 psi one a try.

For the at-home DIY'er (not professional auto paint shop), this seems like the most efficient way to go, especially if you have a home project car or have other small painting projects. I think I am sold on this, not the paint booth yet haha. I really like this little paint system. Thanks for this video!

I would like to see how the panels looked after the collapse and what repair method you decide to go with to respray. Bummer that it happened but it's also an opportunity to provide a lesson on re-repairs and the many different ways to tackle them. Keep up the great videos, I enjoy them quite often.

I have a Fuji 5 stage and I love it. I live in Northern Indiana and getting clean dry air is expensive. I have a restomod shop and don't do a lot of painting but use a lot of of air tools.. With paint costing upwards of $600 a gallon I hate to watch it float away let alone the mess. I have never had any problems with thick paints. Thank you for your time.

@scottr3141

Ай бұрын

I have a Fuji 3 stage, and have painted so many home interiors, (doors,trims,cabinets), I lost count. lol It hasn't failed me yet. Going to try to shoot my son's car with it this month when I get some time.

I just hang plastic and use cloth ground sheets in my garage when I want to spray paint, with a extractor fan and inlet and outlet carbon filters with the outlet filter also fitted with a DIY waterfall system . Works perfectly. Bad luck with the blow up castle/paint both. All the best.

That vacuum install sucked up all that power lol great video man. This maybe my next buy for a garage spray booth.

This is amazing.

I really like that you covered this content. I have been looking into these inflatable booths because they're very affordable. Especially on black friday sale prices. The power outage issue changed my mind because i would be running the elephant trunk blower as well which draws even more power. Looks like i will be spending a little more and building a free standing permanent paint booth. It will be getting used at least 3 times a year

@PaintSociety

4 ай бұрын

Had I used the hook on the top of the booth to hold it up, i wouldnt of have this issue.

Brian, thanks for doing a turbine video. I really love these! I hope you do more with gun setup and technique tips. I own a FUJI Mini Mite 5 stage system that I purchased new on Craigslist for $800. These systems don’t have to be super expensive. I’m still developing my technique but I’m sold on the system. Keep up the good work!

reminds me of a couple years ago , painting a 71 chevy truck for my neighbor . Just had layed a beautiful coat of clear on the cab , when the breaker blew while I was cleaning my gun and prepping another pps cup of clear in a different room unable to see or hear what happened . Came back to my booth stuck to the roof ... epic fail. After that I used the booth on my generator , which can run for 8 hours plus.... and made a pvc structure for a reinforcment inside to hold up in case of any mishaps. I want to try a turbine sprayer that actually did pretty well I like having 1 gun with different tips to adjust to .

I like it, so much less overspray and the results looks great.

As a turbine user since the late 90s, they are great for motorcycle work, as you don’t need to run a big compressor for a smaller job, also they work great for a hotrod flat black, as the heated air doesn’t blush, if you look at a flat black from a compressor it looks blushed

Great video, thank you! Sorry about the outage. That turbine and the man’s spraying technique was impressive.

@PaintSociety

4 ай бұрын

Glad you enjoyed it

Back in the early nineties I sprayed Sikkens with a Croix turbine. 700.00 back then. I sprayed cars for seven years with that set up. Talk about material savings.

Awww man sorry to see that! I wanted to see how it looked!

Seems so efficient that it might be hard to get a run 👌

Yes please!!

Great video. Just out my price range. With all i learn from you and others on youtube. Can paint my car 4x for the price.

I spray interior house cabinets, trims , and doors with the customer in the other room. Overspray with a turbine ends up just like wiping up dust in a house , and it only goes about 6-8 ft. from what your spraying. I'm going to try spraying my son's car for him with my turbine, but I have painted many cars in my garage with the big compressor I have. Just think this would be fun to try .lol

OMG…! Next video…, showcasing a battery back-up power source for the blower(s). “some days are diamonds, and some days are gold”. Great video on the Apollo spray system. Thank you sir.

I like the Paint tricks and tips and he is a cool guy 😅😅😅

that looked awesome. had to check it out. not that pricy but hell of a lot more than buying a compressor and a regular hvlp gun, but i guess the apollo wins in the end anyway, cause you will need all regulators, filters etc and what not with the traditional. worth looking in to.

Nice Acura, that lobster red interior is 🔥.

And the simple solution for sad ending will be carbon (or glass) rods like in igloo tent. 3 or 4 rods will solve the problem.

I'm thinking about a turbine system for home use, so I am always glad to see you make a video using one. An inflatable spray booth would be great but seeing it deflate because you lost power worries me. I believe carcoon makes one that holds the air without motor constantly running.

@PaintSociety

4 ай бұрын

Theres ways around it. Like tying it up. It will precent this

@alleybuilds5370

4 ай бұрын

another thing you can do is build a quick PVC frame on the inside. 4 unions and 8 pipes god forbid you lose power the PVC frame will hold it up. and after you are done painting you just pull it apart.

Those booths should have sewn in loops on the outside so you could tie it up to the ceiling so that in case they loose power they wouldn't collapse on the job. How frustrating! Great video as always Brian!!

I’m a retired painting contractor. HVlP has been around for a long time. We used it exclusively to spray oiled based wood stain and fast dry clear urethane’s on handrails and stair treads. Other than that it was too slow. We would use airless pumps to spray primer and finish on drywall backrolled, and primer and gloss finish on trim and doors. HVlP was great because a quart of stain and a quart of urethane could do three homes. It is much slower than airless.

@MIKEC2000

2 күн бұрын

Two different pieces of equipment that serve two different purposes.

Re the tent collapse. A good idea is create a snap together inner frame with plastic tubing as a back up to support the tent. It is useful as a safety, but also to allow the tent to remain up when not powered while doing setup.

Hello. Love the content and I've learned a ton watching your videos. I have a question about how to spray matte finish. Is the technique different and what are your recommendations for spraying. I also have clear that I'm thinking of adding matte additive to it since I have the clear already. Any info on additive and spraying would be appreciated. Thanks for the videos!!

Hey Brian. I like the way you teach. Don’t be scared it is just paint. Getting my stuff ready to work on a 99 Tahoe with the crap paint they put on the vehicles in that year. Going to HF for the 80 buck gun and getting the stuff from Amazon. I worked in a body shop back in the 70’s. Did priming and fiberglass work. Question though working out of small garage. Where in the line are you putting the dryer and which dryer would you recommend? I have the use of an electric air dryer but going to to put an inline water separator.

I need one of those vacuums

😮😢, those pieces looked so nice too! The system is really interesting, the reduced overspray, better transfer , and either Emilio is an amazing painter or the way the turbine delivered the flow-it really seemed to lay down cleaner than what we’re used to! It would definitely require a larger version of the machine …and would it hold up to painting an entire car at least once a week if you needed it to?? Once the systems become more common I’m sure the capability will improve, I like where it’s headed! You know Brian… k don’t think you have the best luck with the temporary spray booths😂! Once outside with the rain, and now this.. I’m sorry to laugh too, I know how much work is going to be involved getting those pieces back to the condition they were in! 🤦🏻‍♂️ I just hope none were truly damaged. Great episode as always brother!

@ApolloSprayersHVLP

4 ай бұрын

@MidnightOilsRestoration the 3000 PRO will spray an entire car and is designed to be fitted into a collision repair facility, which means it can paint every day!

Isn’t there something you can do to prevent the spray booth collapse in the event that should happen? The spray gun looks really nice 👍🏻

Brian, great video! Im a mobile tech for over 25yrs and have been using the Apollo Precision 5 for the last year or so. Ive been using compressed air the whole time and i do love the Apollo system. Less material and overspray. That being said there is a Huge learning curve going to turbine! You have to trust the flow out ability of the material you’re spraying and put on way less material 😂 or you will get runs like you’ve never experienced. Couple questions about the Precision 6 if you don’t mind?- 1) Does it have the auto Pause? (Hate that feature!) 2) What’s the highest psi the 6 goes up to? (John said 11.5 but i doubt that. I can’t get mine past 6.2. Supposedly the 5 can go to 10psi-NOPE!) All the best!

@ApolloSprayersHVLP

4 ай бұрын

@paulhaeggquist4266 Yes, the PRECISION-6 has the same POWER-PAUSE feature that your PRECISION-5 has. The reason this is important is that it keeps your motor turbine much cooler, adds life expectancy to the motor and gives you overall higher spraying pressures as a result. The actual flow pressure on the PRECISION-6 is about 7.2 - 7.4PSI, or about 1PSI more pressure than your PRECISION-6, which equates to 12% more power. There is a difference between sealed pressure and flow pressure. Your PRECISION-5 will give you 10 PSI sealed pressure if you turn it all the way up and block off the bleed port. Doing this will also cause damage to your motor if you do it for too long.

Brain Question Phil From Australia NSW which is a good gun for a DIY Garage for myself.One that has less Overspray but can do it all Primer Base Clear what would you say cheers.Most products to purchase online are always out of stock not your fault you must be having the same problems we have in Australia stock issues.Also after every car you do when the clear coat is done do you cut & buff all the time.

Back in the 90's I had a neighbor who worked for Graco. He tells me they have a new turbine system prototype and that he would like me to try it on a repairable Jeep Wrangler that I had ready for paint. I reluctantly agreed. I don't recall any of the specifications on the unit or gun but I think it was intended for painting bridges cause the pattern was so wide I had to spray from about 30" 😵‍💫 Surprisingly, it turned out OK but it was not intended for automotive. The Apollo looks great but the price is a bit high for me.

That seems like a nice turbine set up

@PaintSociety

4 ай бұрын

There is a learning curve but its nice to setup anywhere and spray

Brian, this probably won't be a popular comment. But, 2,699 to 2,999 is NOT DIY friendly for most people. For for those living on a fixed or low income, and most regular people who are working to keep an older vehicle running decent, and not looking like it should be in a wrecking yard...that kind of funding is way outside the realm of possibility. And these companies don't send freebies like that to people who are unknown and that don't have KZread channels, on a phone call.

@Smittyyracing

4 ай бұрын

Facts

@jhurley12

4 ай бұрын

I was giddy and excited until i looked up the cost. Not in the cards yet. But look at it like this: Setting up a regular garage for compressor duties, you can go pretty modest, so theres money saved there. By the time you add desiccant dryers, refrigerator setup and maintenance cost, and that in my opinion, without the worry about oil and condensation in the air lines-this product offers alot of predictability in the outcome of the paintjob, even in the short term one will come out ahead financially and job result with this machine. Narrowly. Just my opinion.

@Gary_in_NoVA

4 ай бұрын

Nice demo. But yeah, besides the $$, what DIY’er has a garage or workshop big enough, or empty enough, for an inflatable paint booth.

@mikemikeyee

4 ай бұрын

Seen how much paint jobs cost at the shop these days? This is something a diyer could consider. Probably after some experience with a compressor setup?

@margidda5252

4 ай бұрын

this is DIY. It’s just not budget friendly. Ya goober. If you’re doing it at home it’s DIY.

What cups does it take? Is there a disposable kind like with a normal gun?

great video, what adapter size 3m adapter for the pps is he using? i want to buy one for my gun.

@ApolloSprayersHVLP

4 ай бұрын

@edd707 The adapter on the spray gun in the video is actually the S18, which is really too long. The S34 adapter will work much better and provide a better balanced spray gun.

mate the vac attachment that switches the brush up down is for smooth surface or carpet etc

I used turbine sprayers back when Graco bought out Croix in the late 80’s Yes they work transferred well. I painted a CJ7 with a qt and a half with Centari. Do the guns still get hot ? The first designs are taken from vacuum cleaners.

@ApolloSprayersHVLP

4 ай бұрын

@JohnBarr-ys9zl No, the design of the spray guns is totally different to the design of the guns from 40 years ago. The guns now have a separate handle tube and a plastic handle, which dissipates the heat much better. Long gone are the days of wrapping a rag around the gun handle on those long jobs!

can you do a review of the Harbor Freight Avanti 5 stage turbine paint kit and do a comparison? I think most of us DIYers dont really have the budget for an apollo setup with that price tag. The harbor freight one is a much more affordable sprayer for the average joe.

I've had several people tell me I should get an inflatable spray booth and my reply has always been "I worry about a power outage of flipper breaker"... Sorry to see that happen but thank you for confirming my biggest fear. The only one decent rebuttal I've gotten back to my reply was to hook it up to a portable gas powered generator. That actually made me reconsider the inflatable option.

@PaintSociety

4 ай бұрын

There are ways to make sure this doesnt happen and in my next video I will Show you how.

What Parts stand is this? you got a link for it? Great content, would love to know gun adjustments (fluid turns out, fan size, etc) % solid of the clear, and mix ratios in future videos! Helps the rest of us turbine users keep it dialed in :)

i wonder how it comparea to the fuji q5 turbine hvlp system

If you’re an ambitious DIY’er, you can actually build these your self. Lamb electric makes a 6 stage turbine specifically for spray systems. I’ve been working on one for a while. One day I’ll get it done after all the other to-do’s higher in the list.

I’d like to see the level of peel after its dry! Cool tech! Would love to see a super close up of the paint hitting the panel from that gun. How it differs from a normal compressed air gun.

@Justntoys

4 ай бұрын

It's the same, you just learn to spray slower and closer, and always use extra slow reducer as the warm air from the turbine effects it. No pinch back once you get it dialed.

@PaintSociety

4 ай бұрын

Its best to put 3 coats. I ended up putting one more coat of clear so I could practice and the finish was stunning. Then the power went out

14:05 it doesn't look like much fluid is coming out. Did you guys dial the fluid waay down?

@PaintSocietyI would like to know how you would deal with metal flake that you add into the clear, what steps it would take to make it heavy flaked, and smooth in the end. I did a paint job that turned out ok but I'm not finding a lot of info on these types of things. Not sure if you have an email that I could just send you a better explanation there or pictures of the truck and finish

@ApolloSprayersHVLP

4 ай бұрын

@zandrick1373 we recommend using the Flake King dry flake method. We have an adapter to use that set up with our turbine spray gun. Works great and you save your flake for another time!

I can't emphasize enough as to the importance of keeping child car seats clean. When my son's were barely a year old their mom brought them to my dad's to hang out. We started playing cards and as a babysitter we put the boys on front of the TV buckled on their car seats with a basketball game on. They really liked watching sports as early as 6 months till present day. Their mom was not the tidiest of people. But never gave much thought about car seats. After a while I noticed they weren't "playing basketball“ like normal by kicking their legs and swinging their arms. In fact one was actually staring at the other and trying to reach for him. I spoke up and we all sprung to our feet to notice the one was actually starting to turn color. Being a new dad I kinda froze when I seen that and trying to think what to do. Luckily my dad pulled him out of his car seat and started CPR procedures and when he swept his mouth he pulled out a nickel that was blocking the airway. Upon further inspection of both car seats I gathered 3.5 animal cookies, 7 French fries and $0.47 in change. That was all under the liners but accessable by small hands. Every time she brought the kids to visit I thoroughly inspected her car and car seats. So yes, for kids sake if anything, keep it clean!

You under thought it....should have tied the inflatable roof to the ceiling !! I think you mentioned that in the video you did with the larger inflatable booth. All you can do, is laugh it off. Next time !! For those that can't tie up, maybe use some pvc pipes as an external frame. It was still a great video !!

We'll....it was beautiful......lol great job anyway!

@PaintSociety

4 ай бұрын

😂😂

So i cant use this as a DIY person in my garage because it needs to be in a different area?

If power outages happen somewhat frequently maybe put up a bit of a frame to prevent excessive sagging? Otherwise the result is pretty impressive.

Maybe get one of those eco-flow battery banks, so that if you have a power interrupt, you can just plug it into that and save your paint job

I’d love to find someone near me that can paint like you. Everything I see looks like econo paint

I assume the issues related to a full paint job could be associated with the slow coverage making double wet coats difficult to keep up with - and keeping the wet line wet over the longer spans.

@ApolloSprayersHVLP

4 ай бұрын

@HowardGoldman yes, you are absolutely correct. The 3000 PRO system has about 30% more power, which allows you to move the gun much faster with the clear coat and thus get around an entire car while keeping the paint wet.

How would you compare this with the Fuji Platinum Q5? I bought the Q5 and wondering how much significant upgrade is this over the Platinum Q5.

@ApolloSprayersHVLP

4 ай бұрын

@BoostedGeeks you will get about 15% more pressure out of the 6-stage than you are out of your Fuji. Also Fuji systems run extremely hot, so after about 15 minutes of spraying your air pressure continues to go down as the motor temperature keeps rising. The Apollo systems are designed to give you a more stable spraying temperature, which ultimately result in better performance. When coupled with our digital pressure control and the POWER Pause feature you can't beat it. The filtration is better, so you don't get paint sucked into your motor. All guaranteed for 5-years! It will be night and day difference in the performance of the PRECISION-6.

@BoostedGeeks

4 ай бұрын

@@ApolloSprayersHVLP any chance you would be sponsoring? I got 8 personal MKIV Supra's (including the silver one that went viral on KZread) and out of that 6 will be repainted along with a r33. I got the Fuji Platinum Q5 and haven't used it yet was going to start a KZread build eventually along with other key members/shops from the Supra Community to promote all of us. Lmk. - Bobby Singh

I feel like the basecoat looked very smooth but clear was bleh. Im a fan but i dont see how this can be better. Low cfm gun and compressor will out do this any day

I always tie mine up to the ceiling with the side rings just incase that happens

Fantastic insights from 3 different perspectives. I think you need one of you friends or any other independent guy to give an external point of view.

@PaintSociety

4 ай бұрын

Totally agree!

I use a 5 stage turbine to base entire cars. The unit is holding up so far. I don't spray every day, but several times a month. So yeah, you can base an entire car. I don't generally clear the entire car with the turbine.

@davidcampbell7077

4 ай бұрын

I can spray primer base and clear coat with my fuji mini mite 4... puts out show quality paint jobs and it's alot cheaper than the Apollo turbine sprayer.

@danielniekrasz2038

Ай бұрын

⁠@@davidcampbell7077what tip size do you use for primer base and clear? I’m getting the same setup soon

@davidcampbell7077

Ай бұрын

@@danielniekrasz2038 1.8 for 2k high build primer unreduced.. 1.3 for basecoat and 1.0 for clear coat.

Dude , that corvette is cursed. Everything needs done twice

Looks like an air cleaner for a weber carb

These appear to be slow.. are they actually slow or are.the reps doing the spraying just not full triggering?

@PaintSociety

4 ай бұрын

They are much slower yes

@jerryhovet2991

4 ай бұрын

@@PaintSocietySeems like a lot of turbine guys run 1.3 tips and can spray at a more normal pace, so long as they’re working with a 5-6 stage unit. Have you tried a 1.3 ? I don’t think they have to be run with the .8, although Apollo seems to recommend it with their setup

for a moment after reading the title, I thought he was going to use the "Mr Bean" method.

That’s the major problem with inflatable paint booths. You should build up a structure inside the booth to keep it from collapsing. I would suggest using pvc pipe to frame it out.

@PaintSociety

4 ай бұрын

That's a great idea!

@Flyboy160

4 ай бұрын

You could do it pretty cheap with Home Depot parts. It would be a good fail safe. Feel free to contact me to elaborate.

Was that an infomercial?

@PaintSociety

Ай бұрын

Yes

@PB-dj4nm

Ай бұрын

👍​@@PaintSociety

There was no talk about how the gun was setup

bummer to see that the booth deflated, but it shows that this kind of stuff happens to everyone. Not just me! Fix the mess and move on.

That's out of my price range, $1800-2600 for the small jobs and $7000 for the larger projects. I'll wait until they can come down on the prices.

@aw8388

4 ай бұрын

They won't come down. They were a couple brand when I bought A deluxe kit in the 90's. Try before you buy. I wouldn't buy one unless I got to try the new one.

so you cannot spray a whole car/truck with this system?

@VA-gu1jq

4 ай бұрын

Kind of sounds like you can, but it might stress the unit out some, like running a compressor longer than recommended. Easily if you go panel by panel.

@davidcampbell7077

4 ай бұрын

You can spray a whole car / truck with the fuji turbine system with no problem ..just make sure the weather is between 65-75 degrees to get an flat finish.

@ApolloSprayersHVLP

4 ай бұрын

@@VA-gu1jq you will not stress the system out as it is designed to spray all day long if you want to. The problem is moving the spray gun fast enough to keep the wet edge with your clear all the way around the car. If you are spraying a small car it won't be a problem, but you probably won't get around an old Cadillac or something like that. That's why we have our 3000 PRO system, which is designed for spraying completes all at once.

@jerryhovet2991

4 ай бұрын

@@ApolloSprayersHVLPinstead of running lower PSI with the .8 tip, can’t it be stepped up to a 1.3 and ran with more PSI, closer to the 11 PSI that it’s capable of? I know the overspray will be greater, but wouldn’t that allow painting a whole car or larger surfaces?

@ApolloSprayersHVLP

4 ай бұрын

@@jerryhovet2991 You could do this if you are spraying a low solids clear, but if you are spraying high solids clear you will end up pushing too much paint through the nozzle too fast and won't have enough atomizing pressure to break it down fast enough to give you a smooth finish. With these systems its more about balancing the air pressure to the solids content of the clear. The higher the solids the more pressure you need to get a smooth finish. That's why we use the 0.8mm so we don't feed too much finish into the air stream too quickly.

Well, that stinks. It looked like the finish quality wasn’t up to conventional gun levels, but not bad for an amateur painter. However, it would be fun to see Brian use that system and see how it works for him the first time using it. I am curious as to the learning curve coming from conventional compressed air spray guns.

@PaintSociety

4 ай бұрын

We will record more videos using this system for sure !

Man...i really didn't like mine from the 90's. It was EXPENSIVE for its time, and the air was significantly hotter than my standard. Does it work? Yes. But I'd rather put my $ in a GOOD compressor That will do so many more jobs Than this one show pony. Mine sat in the cabinet hogging space untill i gave it to a cabinet guy after hauling it around and being disappointed every time I DID use it. Now they may be improved, but the truth is, I bet you Won't see many pros pick it up.

Wow I completed my comment and then saw you lost power… hopefully the spoiler was saved it looked like maybe it didn’t get stuck to that… you should put in anchor points to the roof to hold up the booth in case that happens again.

@PaintSociety

4 ай бұрын

Live and learn!!! Problem is i need yo open the garage often and not enough area to tie it up

@terrypercy

4 ай бұрын

@@PaintSociety cut out the bottom and make it a drop down system? Or have the cables be almost a pull type system from the ground, so you can drop and detach at will, or raise and secure

@Justntoys

4 ай бұрын

@@PaintSociety pvc arches on the inside of the booth will work

@josephsimmons8384

4 ай бұрын

Sweet!!

Why can't you paint a whole car?? A regular compressor may not be able to keep the pressure high enough to continually spray. The turbine doesn't store up pressure so you shouldn't run low on pressure. I don't get it.

Looks ok but very slow for a complete respray!

Would be nice if I had 3 grand just sitting around

#hepoops

I can’t understand why he would suggest you can’t paint an entire car. With a turbine system the air is unlimited. Plenty of people have painted large objects with them. I have a friend who painted an airplane with one! No problem.

@PaintSociety

4 ай бұрын

Because this one is particularly slow, and the clearcoat will be dry by the time you get around the whole car and will not Melt in

@T3glider

4 ай бұрын

@@PaintSociety I guess it was because we used single stage paint and were willing to wet sand and polish. For us hobbyists that are crap painters, it will do the job with the flaws being fixed later!

Dirty car seat will be until age 12!!!!

This gun and kit are great but its a one trick pony. so unless you own a shop or paint cars for a living i don't see it worth it.

Looked at the price before watching the video......didn't watch the video

Better make no video , than any video

i loved the part where they cut the power on purpose

@PaintSociety

4 ай бұрын

? Did you not hear the massive rain storm In the closing scene. 😒

@zerozero1944

4 ай бұрын

@@PaintSociety 🤣 its 11:26 pm and im jst happy drinking red berry New Amsterdam maybe you guys have something to learn haha , cant fully trust on electricity shoulda jst used poles but naw ya came out w the trampoline 😪 jst kiddin but who knew , im jst glad i have a gas generator that fills on like $3 no bs, i was truly surprised but glad i got that on me

Wow that stinks.

So next at Bryans house we get to see a whole home Diesel generator install. Use the Cummins generator, FYI!