P4 Sound Modes - Marantz Cinema 30 - Inhouse Review

Ойын-сауық

P4 Sound Modes - Marantz Cinema 30 - Inhouse Review
We analyze the Marantz Cinema 30 sound modes using different source, encoded as - 2 channel CD, DSD 2-channel, DSD multi-channel, DTS-HD MA 4.0 Quad, Dolby Digital Plus 5.1, DTS-HD MA 5.1, Dolby Digital Plus 7.1, DTS-HD MA 7.1, Dolby Atmos, dts:X, Auro 3D 9.1, Auro 3D 10.1, Auro 3D 11.1, Auro 3D 11.1 (7.1+4H), Auro 3D 13.1. We also explore an Auro 3D speaker layout vs. a Dolby Atmos speaker layout with Auro 3D native content. Finally we explain the DAC Filter options of the Cinema 30 not found on lower cost models or any Denon model.
Our channels:
Ripewave Xpress - / @ripewavexpress
Ripewave Audio - / @ripewave
#denon #ripewave #marantz #hometheater

Пікірлер: 25

  • @ceevee291
    @ceevee2913 ай бұрын

    I have its predecessor, the SR-8015. I absolutely love its "All -Channels Stereo" mode. Its my favourite mode for music. Thanks for theisvery extensive dive into 30's modes. Amazing work!

  • @jb.2986
    @jb.29863 ай бұрын

    Wow, great analysis, Jon. We use the Dolby 7.2.6 configuration for Auro 3D (7.2 plus 4 heights) which works well for us when selecting different immersive modes. I’m impressed you have some fantastic physical hi resolution media. We have quite a few selections as well and most of the time Auro 3D is our favorite music listening mode even though our 2 middle heights don’t get used. I’m curious about your thoughts on the three immersive listening modes? Any preference?

  • @FURognar
    @FURognar3 ай бұрын

    Did you check DTS:X and Neural-X with the Auro3D layout? May want to give that a shot. People should know DTS:X-Pro is supposed to be compatible with the Auro layout including Center Height and VoG

  • @ripewave

    @ripewave

    3 ай бұрын

    I did not - could be interesting

  • @mikeortiz2139

    @mikeortiz2139

    3 ай бұрын

    @@ripewave yeah one reason this series is really interesting is one day I want an AV 10. I plan to run 9.2.6 with CH and TS. That'll max out the processing for Atmos, DTS:X, and Auro.

  • @mikeortiz2139
    @mikeortiz21393 ай бұрын

    John, I have a message to Auro, add front wides to Auromatic. Even if its a synth mode.

  • @FURognar

    @FURognar

    3 ай бұрын

    Send it to them. They are under new management and seem more willing to adjust Auro to be more compatible with Atmos than Wilfried was.

  • @mikeortiz2139

    @mikeortiz2139

    3 ай бұрын

    @@FURognar yeah I'm excited for their new direction. Comparing Native Atmos to Auromatic, I still lean to Auromatic unless the Atmos mix is top notch. The fact that they are working to adjust Auromatic to include and utilize objects is just an awesome all-in-one.

  • @michael-4k4000
    @michael-4k40003 ай бұрын

    Let me be first to wish you a happy Easter Sir. May Jesus bless you and guide your light.....

  • @ripewave

    @ripewave

    3 ай бұрын

    Thanks for taking the time to send such a warm blessing. I wish you the same hope which we are reminded of at Easter. -Jon

  • @user-mp5xk46zq1j-io5-

    @user-mp5xk46zq1j-io5-

    3 ай бұрын

    Ok it is a religious channel 😮

  • @1Aquadon
    @1Aquadon3 ай бұрын

    Thanks John.. I'm thinking that in whichever sound mode you got the front wides active .. that if a system was set up in 7.2.6 all 6 height channels would be active yes?

  • @FURognar

    @FURognar

    3 ай бұрын

    Yes, all 6 heights will be active, including in Auro3D mode. Auro will use the stereo Top-Middle as a Top-Surround array.

  • @thezone4957
    @thezone49573 ай бұрын

    Hey Jon, I'm wondering if at some point you are going to review the unit using its internal power amps? After all this is probably what most people will buy it for. I'd also go as far as saying that people in the market for this will not even look at the likes of a pre-pro such as RMC-1 so not sure what the point of comparison is with these? Cheers.

  • @user-ku7tz6mw9y
    @user-ku7tz6mw9y3 ай бұрын

    Hi.. When will the next update be released for the avr-x3800h device.. to support 360 reality audio??. Please respond to me 🙏🙏

  • @mrtickleuk
    @mrtickleuk3 ай бұрын

    Thanks for this! At 6:46 you mention the front wides, and the front backs. I'm not sure what the "front backs" are, but presume it was a little slip! :)

  • @michaelburton5198
    @michaelburton51983 ай бұрын

    Sounds Like The Yamaha, Covers Alout Sound Audio Set Ups/ Formats????

  • @ripewave

    @ripewave

    3 ай бұрын

    It does. While not all care about their DSP sound modes, there are many Yamaha fans which are glad they have retained over the decades. -Jon

  • @michaelburton5198

    @michaelburton5198

    3 ай бұрын

    ​@@ripewaveWhich 1 Would U Pick

  • @John-ok8ts
    @John-ok8ts3 ай бұрын

    22khz. Only babies can hear that high lol

  • @ripewave

    @ripewave

    3 ай бұрын

    It seems that this filter setting may have more to do with marketing then appreciable outcomes. -Jon

  • @user-mp5xk46zq1j-io5-

    @user-mp5xk46zq1j-io5-

    3 ай бұрын

    And you, what you hear ?...

  • @DavidCNavas

    @DavidCNavas

    3 ай бұрын

    I have certainly lost that range. I don't know if it's "audible" or just a bunch of nonsense, but I can speak about lower tones. At some point I lost the ability to hear the 15khz screech of CRTs, but I could still walk into a room and tell if the TV was on or not -- it wasn't audible, but I felt pressure in my ear anyway, and I felt relief/release when the TV was turned off. I know that sounds ridiculous, but to some people it may well be that they can't hear it as a tone, but they still sense something of it anyway. I've since grown quite a bit older, and my hearing is capped a bit lower than that. At any rate, it's always a good idea to judge a thing in person. The good news is that you only need to do that once, the bad news is that we've spent the last decade hollowing out our retail space, so even doing it once can be tricky. Even the binaural recordings I've listened to just aren't sufficient. The subtleties seem lost to me.

  • @thezone4957

    @thezone4957

    3 ай бұрын

    I have this unit and I can tell you, you can def hear the difference between Filter 1 & 2, it's subtle but its there, and Im not young but my hearing is pretty good and my speakers cut off is 25khz.

  • @John-ok8ts

    @John-ok8ts

    3 ай бұрын

    @@thezone4957 Then the filter is changing it below 22Khz because I'm in my mid 40s and I have average hearing for my age I can't hear anything above 14Khz. Do a youtube test that compares your hearing to your age. If memory serves I think you have to literally be a baby to hear that high.

Келесі