Thank you for showing us this OWON multimeter in action. I would be very interesting in seeing how you go about reducing fan noise - a common problem for us all. Regards, David.

@jstro-hobbytech

Жыл бұрын

Hey man. I usually match the size with a noctua fan and a buck converter if need be. Noctua really are very quiet.

@davidv1289

Жыл бұрын

@@jstro-hobbytech Thank you for the information - I had not heard of this brand before. The bearing configuration they use is interesting. David

I have the XDM2041 (4.5 digit version) of this meter. It's not the fastest out there but it is quite decent. I had an issue where the frequency measurement in dual-mode would stop after 15-20 seconds or so when on medium or fast mode. Wrote OWON an e-mail and to my surprise they responded quite quickly and sent me a firmware update for the unit. It indeed fixed the issue so I have to give them thumbs-up for this.

@pfabri

Жыл бұрын

What's the latest firmware version? Strangely, there aren't any firmware updates available for download on their website.

@thorstenstraub3657

11 ай бұрын

My XDM3051 has issues when measuring VAC and frequency simultaneously in dual mode. Measurements were not reliable and even became erratic, even at low speed. I seems the internal processing power was insufficient for dual mode. In single mode everything was fine. I wrote them an email, too, stating serial number , firmware version etc. . Received no answer. I am not happy with the purchase as dual VAC und F measurements are by far so most important measurements for me. Also, in dual mode it is not possible to store both measurements to USB stick. Only the primary value can be stored which seems such an unnecessary limitation. Their website does not offer firmware for download. At least not for the XDM3051 the last time I checked. So it seems you were very lucky.

@thorstenstraub3657

11 ай бұрын

I have to correct myself. It was an XDM3041, not XDM3051.

Nice look over of the Owon. I am still using an HP 3478A and it's right on. Good videos from you always.

@JerryWalker001

2 жыл бұрын

The 3478A is a good meter although I never really liked the display on it.

@TeslaTales59

2 жыл бұрын

@@JerryWalker001 True, those 7+ segments are odd and need good lighting. Was only $50 so I'll keep her running.

I would be very interested in the tear-down video of this meter.

thanks to you,, found out abt cheaper xdm 3041 too

Good to see it compared to the agilent/keysight

I was really struggling when you mentioned trench art several times. Until it dawned on me that it was trend chart you were talking about! 😂 That happens, when you are not a native speaker! Nice video and I decided that I will not buy it (immediately)!

@JerryWalker001

2 жыл бұрын

That is why I initially called it the 'graph function' :)

❤❤❤🎉

the only youtube to show trend,, and histogram,, of xdm 30x1,,,, sadly cant see clearly even on 65 inch screen thanks to 720p and so far away...

Where do you buy your Owon equipment?

Looking into purchasing this model. Would you recommend for general hobbyists that want higher end capabilities without breaking the bank. Thanks

@JerryWalker001

10 ай бұрын

Absolutely. I have a number of these and while they do not have the features or precision of much more expensive units they are certainly ideal (in my opinion) as a high end hobby unit. Please note that I do not have any affiliation with OWON.

@user-hh4ly2xy6s

10 ай бұрын

@@JerryWalker001 Also considering a used in good condition Agilent 34401A. They are similar in price. Would you go new?

@user-hh4ly2xy6s

10 ай бұрын

Meaning the OWon.

@JerryWalker001

10 ай бұрын

@@user-hh4ly2xy6s I rarely buy used multimeters as they are generally being sold for a reason but if you are certain it is in good condition or may need repair then it is personal preference. The HP is most likely to be a better overall meter if it works.

histo and trend,,, can they show degrees c, or, mv ac,, or freq or ohms

@kaybhee6

Жыл бұрын

yes,, can

Sounds like you had a car idling next to the microphone. 😁

@JerryWalker001

2 жыл бұрын

It is not actually as loud as it sounds in the video. The camera mic auto gain turns up the level when there are no other sounds so it always makes it sound like background noises are louder than they really are but the fan in the SMU is relatively noisy.

@rogerknapman1260

2 жыл бұрын

@@JerryWalker001 I have this multimeter as well as the ODP6033 power supply. The multimeter fan is louder than the power supply unless it's got a substantial load on it. I look forward to your remedy, I've been too lazy to investigate.

@JerryWalker001

2 жыл бұрын

@@rogerknapman1260 Yes I totally agree. The fan on both my supplies is are not as loud as the multimeter unless I load up the supplies. I have not yet looked inside the meter so I am interested to see why the fan is needed considering how little power it uses.

Full review please.