OVERHAUL / REBUILD ENGINE CUMMINS QSL 8.9 / 6D114 ( in collaboration with PT BIMA )
Автокөліктер мен көлік құралдары
OVERHAUL / REBUILD ENGINE CUMMINS QSL 8.9 / 6D114 ( in collaboration with PT BIMA )
Some parts of the video have been muted due to copyright.
Job collaboration with a very experienced BIMA Team to work on this engine. Previously the engine had a problem, namely the engine oil was contaminated with cooling water. After being analyzed, there is a crack in the cylinder head, in which the cylinder head can no longer be used.
After running the engine and ensuring it is safe, then it is installed on the crane (RTG) and has been tested for load. After passing the test load, the engine is declared normal and the job is declared finished.
We from the HE Workshop team would like to thank:
- BIMA TEAM who has sent the best mechanics to work together in completing this mission so that it can be completed properly.
- SMK PGRI 3 MALANG and SMKN 5 SURABAYA who sent trained mechanic candidates to help us.
- SURIPAN FABRICATION TEAM who have helped us in fabrication.
Social Media :
Instagram : sinarutamaengineering
Facebook : Sue
If you guys think this video is useful, don't forget to share, like, comment and subscribe so that this channel can grow guys!
Thank you for watching!
Пікірлер: 47
Beberapa part di video telah di senyapkan karena terkena copyright
nice
great channel
@HEWORKSHOP
26 күн бұрын
Thanks!
great video!! keep up the good work
good work
@HEWORKSHOP
28 күн бұрын
Thanks
@Hangover-ry9bo
28 күн бұрын
@@HEWORKSHOP I have the same engine, bought on an auction. Now I know how to start that thing
Thank yuo
Thank you very nice information
@HEWORKSHOP
Жыл бұрын
Thanks for comment
Very very nice video 🎉
@HEWORKSHOP
9 ай бұрын
thank you!
Mantabeekk.. kanG Awaludin.. cemangat..
@HEWORKSHOP
Жыл бұрын
Trimakasih pak yatim crew, semoga selalu diberi kelancaran dalam segala urusan
Nice work
@HEWORKSHOP
8 ай бұрын
thank you!
Masoook bossq, , 👍👍👍
@HEWORKSHOP
Жыл бұрын
Terimakasih bapak
Great team work. I see that you replace the cylinder head. Is that cummins genuine. Keep them coming sir.
@HEWORKSHOP
Жыл бұрын
Ok, thank's
Great job more better to naming every part of the engine to know what they doing each component, much cheers guys.😊
@HEWORKSHOP
Жыл бұрын
thank you sir!
J aimerai le cours mecanique en français
Degree Guage if used more smart
Is that silicone on the cylinder liners ? and why .
Cara ngitung yg garis d selain pada dtc nyaa
Il faut monter les chemises avec huile de Table et non. Avec Selecon c'est Resque de casser la chemise.
Mesin cummins type ini jga d pke truk Faw n CAMC yo om
@HEWORKSHOP
Жыл бұрын
Mohon maaf kami blm pernah menangani truck tsb.
mungkin lebih baiknya mayor komponen pakai yg ori cummins..sebagai saran aja
@HEWORKSHOP
Жыл бұрын
Terimakasih saran nya
Mantaps mass ee....ada no wa buat sharing" ilmu
@HEWORKSHOP
Жыл бұрын
kalo untuk sharing" bisa disini, agar teman" yg lain juga bisa dapat informasi
Pak klo yang garis2 tdc itu drajat nya gmnaaa
How do you install the thermostat of QSl9-g5 Engineer
@HEWORKSHOP
Жыл бұрын
Like at the video
Pak untuk liner & seal nya apakah sama dengan Komatsu bulldozer d68 ss. D68 ss menggunakan engine yg sama soalnya
@HEWORKSHOP
Жыл бұрын
Beda pak, kalau D68 engine biasanya pakai 6D125
Berani kang make main bearing merk afa
@HEWORKSHOP
Жыл бұрын
Yups, kami sudah sering pakai merk ini dan sampai skrg blm mengecewakan.
side conecting rod 0.1 - 0.3 mm :) Not Nm
Pak kalau untuk part apa sama dengan punya komatsu pc300 ?
@HEWORKSHOP
Жыл бұрын
Sama, yang beda cuma piston saja
7 men and still there's a leak 😂
@HEWORKSHOP
Жыл бұрын
😅