Outter Tie Rod End Replacement How To KIA Rio

Автокөліктер мен көлік құралдары

So with this was a standard by all means, it had no power steering, AC, or radio. Which was not a big issue, but with a bad tie rod it can make for an interesting experience. So when driving this vehicle it would violently jerk to the bad side when I let off the steering wheel. That caused a lot of fatigue on longer drives, which wasn't too much of an issue for me but, its a definite fail for state safety inspection. Those ball joints should be nice and stiff, when they are loose you get the symptoms that were just described. These symptoms can also accompany them, which is side play and shaking. I hope this helps out, good luck and happy fixing!

Пікірлер: 6

  • @davidcohen2682
    @davidcohen26827 ай бұрын

    NICE MAN

  • @fixitcarter

    @fixitcarter

    7 ай бұрын

    Thanks for watching!

  • @M4N66
    @M4N662 жыл бұрын

    What the size socket to remove the ball join nut

  • @fixitcarter

    @fixitcarter

    2 жыл бұрын

    Not sure I’d have to watch it back to figure it out. But I’m guessing 17 or 18. Nothing is bigger than 19. So if you have a standard socket set typically going up to 19mm, something should fit.

  • @anarky4321

    @anarky4321

    Жыл бұрын

    its a 17

  • @fixitcarter

    @fixitcarter

    11 ай бұрын

    Thanks

Келесі