Didn’t you get the Data Cable that goes from engine to helm? Can eliminate gauges, hook to your Lowrance, Set up a NEMA 2000 network all at very little cost.

@AngryMackAdventures

3 жыл бұрын

Hey Greg, Thanks for watching! Yes i did but i do like having the gauges there as i can keep an eye on everything whilst still using the Lowrance as navigation and fish finder :)

Great Tip with the "Indexing" of the Spark Plugs !!!! Chomping at the Bit, to see this on the Salt !!!

@AngryMackAdventures

3 жыл бұрын

Michael Shaw thanks Michael! Glad your enjoying it my friend, taking out this weekend, so sea trial coming out soon 😝

Good to see you working on the boat again! Also love the new logo and banner on your channel 👍

@AngryMackAdventures

3 жыл бұрын

Thanks Ethan! Appreciate the kind feedback, HAHA thanks you don’t miss a thing 😂👌🏽

Hi Mate, great video. Just a small note for your motor spec, to index the plugs you can use the range specified in the service manual for your specific motor which is between 15 - 30 Ft.lbs. Cheers

Nice, Mack!

Good Job!

Yesssss been waiting for so long lol

@AngryMackAdventures

3 жыл бұрын

Jason Ibrahim Haha sorry mate, we are back at full steam! 😝

another quality video mate, i like the quick shirt change too :P

@AngryMackAdventures

3 жыл бұрын

Glad you like it! hehe

Great video, question do you have a video on changing water pump on that engine? I need to see one thanks

Great tip on indexing the plugs mate. I love my ETEC too. My young fella had to do the Insta thing for me. Sorry mate, I don’t do any social media.

@AngryMackAdventures

3 жыл бұрын

Thanks mate, glad you enjoyed, I love the evinrudes, shame they are a thing of the past now! That’s awesome thanks for entering, good luck! ☺️

In addition to this Australian KZread Channel I also watch the Dangar Marine Channel. Stu , the creator of the Dangar Marine Channel is located in New South Wales and I believe the creator of this channel is located Western Australia. Question? Are there regional accents in Australia? While to my American ears both of our Aussie hosts sound Aussie, but it seems that there is a slight difference in the way each man pronounces certain words.

@AngryMackAdventures

3 жыл бұрын

hahah yes i am in Western Australia! yes and no, there will be a few words here and there that may be differently pronounced, depending if you say it in Aussie slang or not :')

I want to check the compression on a 50 hp etec . Can I remove the plugs put them in the caps and turn over the motor like i would any other motor .How much psi should i be getting per side ?

Finally!!!! so how long are you anticipating until she hits the water?

@AngryMackAdventures

3 жыл бұрын

haha! weekly videos again, been a busy few weeks, i am hoping in the next week or so :)

Good work mate, you must be itching to get her onto the water in time for summer?!

@AngryMackAdventures

3 жыл бұрын

Rohan Black mate I’m hanging!! Taking out this week, pretty excited 😜

this was really good as i get a boat with these outboards i will knew what to do on these outboards in case i get a boat with say a 150hp Evinrude in my case i get the older model premix Evinrude these was the older models with the twin lock under the cowling these was the 150hp premix model im getting in future as i dont like the newer motors for a reason was i liked the older big Evinrude V6 outboards that are premix motors i love the older model outboards that ae 50;1 models as i dont like the oil injection as my carer told me to stay away from the outboards with oil injection say the older motors with the troubled VRO systems this why i liked the premix models these was the motors on 50;1 these was my preffered motors my buddy

Finally

@AngryMackAdventures

3 жыл бұрын

Xd Coombsey2005 HAHA thanks for the patience, back at it! 😎

I want to do this with my frazer 5.25 but i’m very much lacking most of the skills required. Who would usually do this kind of thing? a shipwright? What do you reckon that would cost?

@AngryMackAdventures

3 жыл бұрын

Hey Mate! honestly, depending on your outboard, its very easy to do, with a basic socket set can get the job done in 20 minutes :)

@woodywood6961

3 жыл бұрын

@@AngryMackAdventures :D sorry, I've been following the whole restoration. I meant the whole thing. Mainly the paint/gel coat etc I just love what you've done tho. I've noticed the bottom doesn't get any love? Is this just because it's logistically hard to do it just something that isn't done?

Subded to your insta as requested I bloody get a bit irate when buggers use impacts where they shouldnt due to lazyness... I bet the cover was fucked due to to many dac dacs. Ie one. Use a hand tool. Really enjoying this series mate from Brisbane!

@AngryMackAdventures

3 жыл бұрын

Thanks for that mate and thanks for watching! Yep impact drivers destroy things if not used ont he correct things! Ahh well all replaced now 👌🏽

Did you set the gap on the new spark plugs ? .

@AngryMackAdventures

3 жыл бұрын

Sure did mate!