Very helpful that you tested al lot of things like the position of the mount on the handlebar

Thanks for a great review. Btw, the clamp looks fine to me. It needs to be a bit open from the inside, so the holes will be aligned when tightened. The clamp jaws should have a small gap when fully tightened, you just need to have the right bar spacer.

Excellent review. Answers a lot of questions i had and also some good warnings. Keep up the good work.

Thanks for GREAT preview! Outmount PRO, that's what I need because I like keep my phone horizontal position!

The clamp is probably intentionally a few mm apart because its expected you will have the rubber insert and there will be compression, so its most likely designed to never be fully closed.

I have the new Quadlock MagSafe case for my iPhone and it charges on my MagSafe charger perfectly. I realize this video is 10 months old so perhaps it’s a more recent adaptation but mag safe does seem to be making the efforts to allow their cases to be wireless charging friendly. Also the newer cases have a flush back and no longer protrude awkwardly. It’s definitely worth checking out to see if they have what you need for whatever device you use

@jeremyw.465

7 ай бұрын

Hey, thanks for your comment. I already have it with MAGsafe because I changed to an iPhone but after having made this video. I will adress it in case I make another video about it! Cheers :)

JFTR: the out front mount is not made of steel but reinforced nylon.

Can the mount be adjusted so that the phone stands up to record like a go pro? All videos i see the phone sits flat just used for gps

@jeremyw.465

Жыл бұрын

Yes that is possible. I also don't understand why no one is pointing that out!

Great vid! Thank yoU! Sold me!

Thanks for the review.

There is a MAG case option. Wireless charging works perfect with the MAG case.

Perfect thanks

Where could you buy a black pro for a bicycle on the website? I see it's only for motorcycles ??

@jeremyw.465

Ай бұрын

If you go on their website on "Mounts" and then onto "Cycle", you'll find the Out Front Mount and the Pro Version. Click on them and under "1. Select a mount / Pick a mount" choose the you want. I hope that helps ;)

Would love to see a comparison of the front mounts on time trial bars for a road bike

@jeremyw.465

7 ай бұрын

Hey, why is that?

Thank you for the good review!

Do you use your smartphone exclusively instead of a head unit? I just got into cycling and have my old pixel 5 laying around, so I was thinking about using it instead of buying a cycling computer.

@jeremyw.465

Жыл бұрын

Hey, yes I would definitely recommend using your phone especially when being new to the sport. There are great Apps like Komoot or Strava which you can use. The only big advantage of a cycling computer is that it lasts longer but I have never managed to run out of battery on a tour even when going 100k. And you can allways upgrade if you want but I'd say a phone is the best when getting started because you don't need to buy anything extra. Hope I could help! ;)

How about the Vibration on the Camera stabilization? Because there's no Dampener..

@jeremyw.465

11 ай бұрын

I haven’t had a problem up to now, even on my iPhone with a glas rear and I ride also on rough terrain. But when going down trails I do tend to put it in my pocket ;)

Nice one, thanks!

will this work on bmx bike handlebars?

@jeremyw.465

4 ай бұрын

Hey, that is a good question. Since I am not in the BMX sport I don't really know all the different types of handlebars you might use but for the flatter ones it should fit and even for ones that have a lot of upsweep I can think of the mount which QuadLock made together with Brompton for there riser bar. That might not look that neat but I bet it will work! Cheers!

thank you most informative

Hey I would like to ask if the case is also available for Xiaomi phones like mine, please reply 🙏

@jeremyw.465

6 ай бұрын

No sadly not. You would need to buy the universal adapter: www.quadlockcase.eu/products/products-bike-kit-universal-fit

@user-ih3ww1ph7l

6 ай бұрын

@@jeremyw.465 thanks for the reply I appreciate it. So you mean in case I buy the product "cycling - handlebar/stem mount" firstly I need to buy the universal adapter to fit my phone to the bike right?

@jeremyw.465

6 ай бұрын

@@user-ih3ww1ph7l yes exactly, it works by sticking it onto your phone. The universal adapter has a sticky side and I would recommend you use a phone case and don’t stick it to it directly. Cheers

@jeremyw.465

6 ай бұрын

@@user-ih3ww1ph7lHerr the link to the universal case itself without a mount for 14,99€ www.quadlockcase.eu/products/universal-adapter

@user-ih3ww1ph7l

6 ай бұрын

@@jeremyw.465 thanks seems a bit expensive if someone wants also the mount but it's very good decision as a product I believe 👍

what cam do you use?

@jeremyw.465

7 ай бұрын

Hey, I use a Panasonic LUMIX G70 from I believe 2018, chears

⁵