Love mine, got it for $67 on Temu. I then made an aviation plug to use with the fiber laser driver. Had to change the power setting on the driver as it got really hot.

@Vintauri

2 күн бұрын

Wow, $67 is a steal!

Very nice demonstration of the Ortur Rotary Chuck capabilities. I always enjoy all of your videos and appreciate the work it takes to share them with us.

I recommend getting cardboard tubes (from paper rolls) that are about an inch in diameter and cut them into rings as a practice rings for engraving. The power will clearly be different, but orientation and technique can be perfected. I am ordering an Ortur rotary since XTool won't send me the cable they omitted when I got my XTool rotary.

@Vintauri

2 ай бұрын

Those are a good practice material, although they can be a bit warped at times. I always advocate plenty of practice on cheap or free materials however you can find them!

@pop-popmoose5359

2 ай бұрын

@@Vintauri If it's free, it's for me!

I was trying to find help for a stanley cup w handle. Thanks for the idea about the flopping the chuck. YES!

@Vintauri

11 ай бұрын

Happy to help! That 180 degree rotation of the motor makes that an easy solution for larger items. You just need to make sure it's counter balanced.

Great job on many if the little things that need to be done.

@Vintauri

Жыл бұрын

Thank you! I wanted to make sure to cover the variety of options with this rotary.

Nice demo I have one coming soon. I will be doing cups with handles. I have a DPSS 4watt laser engraving module that does all metals fantastic.

Good explanation on setting up the YRC

@Vintauri

9 ай бұрын

Thanks 👍

very helpfull info, just orderd 1 similar rotary. thanks for sharing.

This is the best video I've seen on this thanks for all your help now I know how to use it

@Vintauri

11 ай бұрын

Glad I could help!

@stevejones01

11 ай бұрын

@@Vintauri Engraved my first glass while watching this. There is nothing close to this tutorial on the tube.Does that spray work on glass?? I used tempera paint

Thank you for teaching me… I have the ORTUR roller & the chuck roller, for my Ortur LM2 10w

@Vintauri

2 ай бұрын

Wonderful! Glad to help.

@judyanabatiz167

Ай бұрын

I he Noseacheerrrtu 2 000w.. Juanitoiliilllttrhtiii.. Theo

Excellent, thank you very much

@Vintauri

Жыл бұрын

Glad it was helpful!

Great video. I recently purchased the Ortur rotary chuck and am waiting for it to arrive. I bought it to mark tumblers and cups with a handle. I never thought about marking eggs, rings or toothpicks!

@Vintauri

9 ай бұрын

Hope you enjoy it! The different attachments really open up some options for engraving items. The toothpick was just a challenge I had to try! :D

@chucklenz9011

6 ай бұрын

What was the time to engrave the ring inside &outside?

@chucklenz9011

6 ай бұрын

What’s with the red star? First in class?

Thanks, that was really handy. I got this tool yesterday (only had my laser a few days, so a total noob) and followed your video step-by-step to do my first cylindrical engraving. It pretty much worked great, thanks to your help here. The things that didn't go to plan were: 1) That backlash command at 10:41 just gave me a "Error:80", so I didn't bother with it. Didn't seem to cause an issue. 2) I had text in my test engraving and it came out mirrored. I've only had my laser a few days and this is the first time I've tried text. 3) The text was oriented sideways, so I will need to turn it 90 degrees before burning.

@camilo23ariztizabal

10 күн бұрын

Hello friend, connect the orthur mandrel to the Sculpfun S30 Pro, I put the command $22=0 and it comes out OK and when I put the command $141=600 it comes out ERROR, and I can't do anything anymore because the mandrel starts to sound ugly.... it has any help for this?

On light weight cups the plastic works great on yeti cups you best use the metal studs inside the cups.

Hey, Great info in your vids Curious about the other lasers I have the comgrow Z1 just curious this model rotary would work with that machine Plug and Play?? Thanks hope you or anyone can help...🙂

Thanks! Really saved me a lot of trouble! Did you use some calculation to alter the image (projection) on tapered objects ?

@Vintauri

Жыл бұрын

I'm glad it helped you out! I did not make any adjustments on this one for the taper.

Hola amigo, tengo un Sculpfun S30 Pro, crees que si sea compatible el mandril ortur ?

How do I get it back to normal now though? It won’t home at all and my origin goes crazy. I have not even tried engraving anything after switching from flat to rotary. But I have an order and cannot figure this out.

Ortur Y-Axis Rotary Chuck For Laser Engraver (YRC1.0) I got this for my Xtool D1 Pro 20W How do I plug it into the Xtool? Thanks

Don’t you need to upload the rotary set up in machine settings? I did using the Ortur YRR.

if this rotary chuck is attached to LM 2 pro with extension kit, is it possible to engrave on object attached to the chuck longer than the base of the rotary chuck? if yes, how would you support the other end.

Thank you for the video and taking the time to go thru the $22 and $141 codes around the 10 minute mark. I understand the $22 is Homing ON/OFF cmd. You mention the $141 is for backlash, but if I look at the Machine Setting function it shows $141 as the Y driver current amps and shows 5.000. You might mention that the $22 and $141 settings need to be changed to go back to normal use. With that said, I do think you've got the best video around on setting up and using the Chuck Rotary tool. Thank you. Edit: I asked about the $141 cmd on the LightBurn forum and got the answer there seems to be a bug in the system. It should be amps (perhaps better expressed as mA). Seems $161 is the Y axis backlash cmd. Again, THANK YOU for a good video

@mmarshall1231

Жыл бұрын

How do you change the $22 and $141 settings back exactly? I ask because I just changed them to follow along with this video but he doesn’t mention having to change them back!

@kenh8979

Жыл бұрын

@@mmarshall1231 Just use the same $141=1000 to set them back to normal, and $22=1 for normal homing operation.

@camilo23ariztizabal

10 күн бұрын

@@kenh8979 Hello friend, I have a problem, I bought the Orthur chuck and I have a sculpfun S30 pro, I put the command $22=0 and it comes out OK and I continue with the command $141=600 and it comes out ERROR, and I want to do an engraving operation and it doesn't work, I can you help ?

@kenh8979

10 күн бұрын

@@camilo23ariztizabal I'm not sure why the $141 code gives an error msg. I suspect it's because your sculpfun S30 uses a different cmd for that code. From my understanding the $141 code controls the current limit for the stepper motor. If that's true, I'm not sure what the deal is with changing the value from 600 to 1,000. These days I don't really change that value and my OLM3 seems to work just fine. Have you tried doing an engraving without changing the $141 value? Good luck and let us know how it works.

About ready to try my rotary chuck. I bought an adapter that holds the laser at 90 degrees so it points to the back of my LM3. This way there is no need to elevate the LM3. With the changes to the GRBL commands I think I read somewhere that a user saves a version with the rotary commands and without them. Do you do this? If so how do you load these GRBL commands into the LM3 (just paste the script into the command line)? Also, found this on the Ortur FB (have you needed to modify this? maybe the rotary chuck is OK): There is a.problem using the YRR Rotary unit with the OLM3 10W Laser. If you haven't discovered this for yourself already, then read on. The OLM3 uses different stepper motors for the X and Y axi from the OLM2 PRO, SF, LF and the Rotary unit. The OLM3 steppers work on 100 steps to the millimetre, while the YRR Rotary unit stepper works on 80 steps to the millimetre. Which means that the Y axis lengths will be increased by about 25% on the Rotary, if you don't adjust the relevant gcode parameter. So shapes that encircle the whole cylinder will overlap by 25%. $101 needs to be changed from 100 to 80 while using the Rotary with the OLM3. ( $101=80 ) And don't forget to set it back to 100 when you go back to standard engraving, or your Y values will be 25% shorter. $20=0, $22=0 and $101=80 for the Rotary. $20=1, $22=1 and $101=100 for Standard engraving. Best to save 2 seperate profiles and then switch between the two.

I priced a can of the brilliance spray. Wow why so costly? I normally use rustoleum for tile and other materials. Is there something that the brilliance does better ? I only have an Ortur laser master two which is probably only around 5watt output power. I noticed talk about brilliance only fairing well with higher power lasers. Any thoughts? Great information that you provided. My rotary is going to be here this week. Thanks again!

@Vintauri

8 ай бұрын

The brilliance spray is expensive, but a little goes a long way and it's easy to apply, wash off and it's markings tend to be consistent. I've not had much luck with it on a 5w laser, but 10w is enough to fuse it with a dark and crisp marking.

I have it connected to my Sculpfun S30ProMax, via Lightburn. Works great, but aligning takes some time. This chunk is more versatile dan Xtool's RA2, and a lot cheaper, in my case 1/3 of the Xtool.

@Vintauri

Жыл бұрын

If you switch back and forth from the rotary to the regular laser a lot, it might be worth setting up a Jig to align the rotary to the frame and then know a specific distance to get you to the center. That should help with alignment each time.

@BigRedDad1970

Жыл бұрын

Thanks for the comment. I have the S30 PM and was trying to verify compatibility before purchasing. Now that I know it works, I will order one. Just watching videos, I am guessing it takes quite a bit of work to align this correctly.

@BigRedDad1970

Жыл бұрын

what settings did you use to set this up in Lightburn? I thought I had it setup correctly, clicked the Test button and the rotary just grinds and jumps around.

Thanks for the demo but I see that we have YRR 3.0 and this Y Axis chuck is the only difference the ability to do cups with handles?

@Vintauri

Жыл бұрын

Cups with handles are one of the big advantages. It's also easier to level this with the adjustable angle. The chuck also has a positive grab on the item rather than relying on gravity to hold the object to the rollers.

I can't get rotary chuck to hold on to heavy dollar store tapered glasses. It don't matter if I try to grip them from the small end or the wide end, they slip out of the the chuck. And, it also doesn't matter if I grip them outside or inside. Any ideas?

@Vintauri

2 ай бұрын

Try adding some masking tape to the area of the glass where you are trying to grip it. That should give it more bite to hold on.

Estou tendo dificuldade em fazer desenhos circulares não sai perfeito

will this work with Epilog lasers? thanks for sharing.

@Vintauri

Жыл бұрын

It might but you'd have to look into the Epilog control board and stepper drivers to make sure it would be compatible. Unfortunately Epilog lasers are not all the same with that so it's also going to depend on the model.

Hi! What kinda Spray You used? THX

@Vintauri

6 ай бұрын

I use Brilliance Marking Spray. amzn.to/3Nt5DW2

how did you set the diameter on the tapered cups?

@Vintauri

2 ай бұрын

I pick the middle of the design and test that. In lightburn they now have the tapered cup tool that helps adjust for the angle as well. I need to try that out and do a follow up with it.

How much weight have you use on the Rotary Chuck? I want to use it to hold aluminum bars in order to engrave a part number.

@Vintauri

11 ай бұрын

I have not specifically weighed anything that I've put on this. The largest item would be 20oz stainless steel tumblers that I've engraved. You might look into an optional support roller that could be 3d printed to take the weight off the chuck.

Just got my chuck rotary and have a olm3. Went looking for the white Brilliance spray but could only find black. Has white been discontinued?

@Vintauri

8 ай бұрын

I don't think there has ever been a white marking spray from Brilliance. You can use it on glass and with lower power it will frost the glass giving it a white appearance, where as with higher power it can fuse the titanium dioxide as well causing the black look.

@jimhamilton2680

8 ай бұрын

Note your comments regarding white brilliance paint at 20.00+ minutes into your video. What kind of white were you using?

@Vintauri

8 ай бұрын

@@jimhamilton2680 There is only one kind of brilliance marking spray. It's usually used for leaving back markings on metal, however when used on glass and at a low power it just frosts the glass instead of fusing the titanium dioxide to it to turn it black. It will not leave a white marking on anything. Glass just needs a binder to heat up the glass and cause micro abrasions to cause the frosted effect. You can do the same thing with black paint on glass.

I just purchased the LM3 and rotary chuck. Ha - was wondering if it could hold my turned wood pens. You used marking spray on SS. The marking spray says it's designed for CO2 and fiber lasers. Is it OK for blue lasers? I use TiO2 powder and isopropyl alcohol on white tiles. Do you think the TiO2 will work on SS? - Thanks

@Vintauri

Жыл бұрын

I don’t see any issues with it holding most turned pens. I need to turns some new ones myself and throw them in here. While the marking spray says it’s for co2 and fiber lasers, I’ve found it works well with diodes at higher power levels. I do have some TiO2 to mix up and test as well, I just have not got around to testing it yet.

@youmbgtube

Жыл бұрын

@@Vintauri thank you for the quick response. BTW - for tiles I use a 3:1 ratio of 91% isopropyl alcohol to TiO2 (mix well!) and air brush it on the tiles.

I have a NEJE 3 Max v2 laser. Is the Ortur compatible with my laser??? Do you know?

@Vintauri

4 ай бұрын

It should be as the Neje has standard 4 pin connectors on the board and steppers. I have not tested it as I would have to lift the laser up on supports to use the rotary and I do not have it in an enclosure with a dropped bed yet.

Will this work on comgrow z1 ?

@Vintauri

3 ай бұрын

It does come with a couple different cables that should allow you to connect it to the Z1 along with other lasers. Most diode lasers use a four pin plug and you just need the right pin out thus the extra cables they provide.

Will it work other brand lasers"

@Vintauri

6 ай бұрын

Yes as long as you can adapt the plug to the Y stepper on the laser. It comes with a couple adaptors but some may be different.

I run my test and it runs perfectly. But every time I put an image on light burn it compress my image? Any ideas what I might adjust?

@Vintauri

Жыл бұрын

Can you clarify what you mean by compressing the image? Does it look compressed in the software preview or only when you send it to the laser?

@theaverageguysfoodreview815

Жыл бұрын

@@Vintauri thanks for the response I figured it out. I accidentally put the wrong diameter…. It’s fixed!

@Vintauri

Жыл бұрын

@@theaverageguysfoodreview815 Good to hear! I've done that a few times and it's frustrating.

Hi. Would I be able to use this with my Aufero laser machine?

@niqa2000

Ай бұрын

It's the Aufero laser 2

@Vintauri

Ай бұрын

You should be able to use this assuming it has standard wire plugs on the Y axis stepper motor. The kit comes with a couple typical cables to make it work with many machines. However, I cannot verify on this specific machine as I do not have access to one.

What spray did you use

@Vintauri

7 ай бұрын

I used Brilliance Marking Spray for the stainless steel cup. amzn.to/3R2Elba

@gdubbswilson6207

7 ай бұрын

thank tou

When I place the test, it sounds stuck, it doesn't turn, what's happening in this case?

@Vintauri

23 күн бұрын

I would double check that all the wires in the connector are plugged in. Sometimes a single pin can come loose and in this case you will hear a chattering while the stepper will not move.

@isabelrivero6951

12 күн бұрын

@@Vintauri Thanks. The chuck does not turn, it stays stuck, it tries to turn to one side then the other and it stays stuck, I don't know if it is a configuration problem in Lightburn. My laser is a sculpfun s30pro diode laser

@isabelrivero6951

12 күн бұрын

@@Vintauri I have checked the cables

New creality rotary pro .makes grinding noise a d doesn't turn

@Vintauri

6 ай бұрын

Check the pins on the connectors, it sounds like one of the stepper motor phases is not connecting.

Kinda disappointed that you didn't use a real egg.. Just kidding.. Good job!

@Vintauri

Жыл бұрын

Stay tuned for tomorrows video! ;)