Orion Paragon Plus Binocular Mount - Review

Музыка

A Review of the Orion Paragon Plus Binocular Mount and Tripod.
A Look at how the Parallelogram fits onto the tripod.
You can use a tripod with either 3/8 " bolt or 1/4 " bolt.
You may have to modify the connection a little to fit other Astronomy Tripods.

Пікірлер: 20

  • @AkubraHatman
    @AkubraHatman2 жыл бұрын

    The 4 knobs on the side are not used to hold the binoculars in place and stop them sinking down. If the mount is properly balanced with the counterweight then the binos will not sink down. The knobs are there to provide a bit of resistance when moving the binos around. Cheers

  • @kennichols3992

    @kennichols3992

    4 ай бұрын

    Yeah, but... (LOL). The knobs also provide resistance when the balancing is not exact. They're a fudge factor.

  • @barlow2976
    @barlow29763 жыл бұрын

    Excellent, very informative. When I woke up this morning I didn't know I needed this mount !

  • @stevetonkin8112
    @stevetonkin81124 жыл бұрын

    If you want to balance the binocular without doing up the tension knobs, you can extend the counterweight arm to find the right balance.

  • @book3100
    @book31004 жыл бұрын

    Great review, answered my questions. Looks like my 15x70s will be perfect on that mount.

  • @RellyOhBoy
    @RellyOhBoy Жыл бұрын

    Thanks for the in depth review guy. My 20 X 80 Orion Binos could benefit from this setup. The Orion flat mounting plate kit is way overpriced.

  • @rowdyron4111
    @rowdyron41114 жыл бұрын

    Thanks for sharing.

  • @itsfahys
    @itsfahys3 жыл бұрын

    Thanks for the Reviesw and I have purchased this Mount for my Binoculars. Im also looking to use my Nikon D7O DSLR mounted on the P mount but the Screw is too long, so the Camera is Loose, but it fits perfectly with any Binoculars . Wondering what adaptor and a smaller Camera Screw I could use, Thanks

  • @twang5446
    @twang54464 жыл бұрын

    looks like you’re not using the tripod adapter that comes with the skymaster 15x70. Is there a specific reason that you are using a different one?

  • @StarsandGuitars100

    @StarsandGuitars100

    4 жыл бұрын

    Yes, the resin one shows some vibration - I prefer to use a metal one.

  • @MindbodyMedic
    @MindbodyMedic4 жыл бұрын

    is it not very uncomfortable at zenith?

  • @StarsandGuitars100

    @StarsandGuitars100

    4 жыл бұрын

    Its not bad - much better than hand holding the binos. Because you can get right under the them and your hands and shoulders are down and relaxed.

  • @p00kaah
    @p00kaah4 жыл бұрын

    Very helpful, thank you. I would like to know how low the Paragon Plus will go. It's nice to support your head and neck when craning at high altitudes and I've found that a deck lounger with head support is great for this. Would it travel that low?

  • @StarsandGuitars100

    @StarsandGuitars100

    4 жыл бұрын

    Ah yes - so true! I haven't tried it with a deck lounger but have seen it done. Next time out I'll see how low she goes!

  • @skmcc9252

    @skmcc9252

    4 жыл бұрын

    Thanks. that would be hugely helpful. I'll keep an eye on this space to see what you find. Thanks again.@@StarsandGuitars100

  • @skmcc9252

    @skmcc9252

    4 жыл бұрын

    Thanks - Look forward to hearing what you find out.@@StarsandGuitars100

  • @chuckmoser9662
    @chuckmoser96623 жыл бұрын

    Get a lavalier mic so your audio is consistant.

  • @buckredman9363
    @buckredman93633 жыл бұрын

    the price would be helpful

  • @barlow2976

    @barlow2976

    3 жыл бұрын

    Heard of Google? How does he know where you live?

  • @waynekozak1462
    @waynekozak14624 жыл бұрын

    Please learn to turn your phone sideways!!!!!!!!!!!!!!!!!!!!!!