Another fantastic video even though 5 years ago. Beautiful work and I love the trick with the mini drill grinding wheel. Never seen that before.

@JimmysCanal

5 жыл бұрын

Hi Nick, I apologize for the late reply. Thank you very much, indeed! Although it came out pretty good, I must say though the arrengment of the stud on the top slide can't give the best clamping abbilities and that is because the top slide dosen't has a T-slot to hold the stud. As for my Proxxon grinder, it copies in a way the work of a milling machine (that I don't have). All the best Dimitris

Hi Jimmy, Nice installation. Thanks for sharing. Best, Tom

@JimmysCanal

8 жыл бұрын

+oxtoolco Hello Tom, Thank you for the comment! And glad for sharing your projects with us! Cheers Jimmy

Beautiful work. Thank you for sharing it.

@JimmysCanal

8 жыл бұрын

+kglesq1 Thank you very much for the comment! Always glad to share! Cheers Jimmy

Good job, good quality I know, same as our models 40 positiion quick change tool post.

@JimmysCanal

8 жыл бұрын

+Terry Wang Thanks a lot for the comment! I appreciate it. All the best Jimmy

OK, thanks Jimmy, wait your information. regards Mario.

Very nice. Thanks for sharing.

@JimmysCanal

10 жыл бұрын

Thank you David. Glad to share!

I just rigged the same thing up on my D180x300, but I didn't find it necessary to make a whole new post. I just bored out the main gear looking thingy to fit the top slide, and drilled out the top stud that came with the quick change tool post (it looks like yours already fit though). Being all clamped down by the nut on top means it's never going to move.

@JimmysCanal

8 жыл бұрын

Hi, Please forgive me, but it was impossible for me to reply sooner! The only thing that actually made, was the stud. And I made that because the Multifix tool post didn't had a matching one for my lathe and the stud from the quadruple tool holder was too high to use it. All the best Jimmy

I amazed you got that package, the address looked very hard to decipher....

Very nice one indeed. I have the same QCTP, this one is 100% identical to the one sold by Createtool (Google them). Chinese, yes, but high quality.

@JimmysCanal

8 жыл бұрын

Thank you very much for your comment! Yes I know Createtool, they have also a shop on ebay. Unfortunately they don't have any tools for sale?? I think someone can contact them only on their official web site: www.createtool.com/ My humble opinion is that Createtool makes quality Multifix replicas for all the major lathe manufacturers and simply print's their logo on the body of the QCTP. Thanks again! All the best Jimmy

Nice!

@JimmysCanal

8 жыл бұрын

+Игорь Самсонов Thank you very much! Cheers Jimmy

I got my TU 2004V with the 'Multifix' factory installed. I think it cost 45euro in labor. Really enjoying working on it. Nice little machines. Only gripe is the cost of the tool holders ... yikes

@JimmysCanal

7 жыл бұрын

Yeah I know, factory installation has extra charge. And as you said the holders are pricey. Anyway, it's really a good tool. Thanks for your comment! All the best Jimmy

nice video! I realise it is some time ago you have made this, but can you explain how you hardened the shaft? or did you maybe explain that in another video. thanks, Peter.

@JimmysCanal

9 жыл бұрын

Peter Heuts Thanks for your comment Peter! I give the shaft to the supplier that initially I bought the steel, he also has a very equipped facility for hardening steel. The shaft has surface hardening by nitriding. Thanks again! Jimmy

Cool tool holder and great job mounting! Why not use the carriage rater than the compound, so to be sure to be dead on z axis? I'm sure it's fine just curious. Thanks for sharing.

@JimmysCanal

7 жыл бұрын

Hi Steve, Sorry for the late reply. Thanks for the comment! What you seen on the video was my first measurment. I took a second measurment on the inside back of the holder without the tool, as some other viewers told me. Both measurments was ok, but defenetly I'll check your idea. Thanks again! All the best Jimmy

You obviously took a lot of pleasure making your tool post installation exactly to your liking. Another fellow might locktite in a factory stud as good enough but in a home shop you set your own standards. However 1045 is excellent fastener material as it's low in cost, is readily machined up to Rc 35, is ductile enough in the annealed state for cold forging, and may be heat-treated to any of the standard fastener grades save those intended for elevated temperature service. Polar alignment of the holder to the compound's sliding axis might seem convenient until tool orientation to part feature is concerned - ie: threading tool flank symmetry to pitch cylinder. 40 postions has no convenient increment at 30 degres compound angle. Another point is choice of reference surfaces: the as heat-treated face of the holder is never employed as an abutment. The tool shank contacts the lower ledge and back wall of the holder and thus must be considered as reference and location surfaces. The dip in the face you pointed out is likely an artifact of heat treatment distortion. I love the accuracy, repeatability, and convenience of the Mulitfix pattern QCTP system. I've used most versions ever manufactured over my career and never once found loose-ness or inaccuracy except in rare instances of 40 years of hard wear and abuse. My personal tooling is based on a "B" set marketed by Enco in the early I '70's and added to via auction finds and Asian import holders. All interchange and repeat to small tenths. Whether Mulitfix, Aloris, or some other QCTP system is superior seems to be more a matter of partisan opinion than objective merit. I've used most but I've come to favor the Multifix because of Its 40 position feature. If I want to quickly change the tool lead angle for better chip control I can increment the holder angle without disturbing the orientation or dial settings of my other tool holders. Outside of that one feature, all well made QCTP systems have about the same accuracy, rigidity, repeatability, and durability. But it is that one feature - indexibility - that inspired me to commit to the Multifix system for my home shop. My only downcheck for the Multifix system is the difficulty in making DIY tool holders. The spline is a real challenge for a small shop unless you have some form of reciprocating tool shaping capability and part indexing. My solution was an "E" shaping head on a Bridgport mill and a rotary table. It worked well if I was careful but in general it was a PITA to DIY Multifix tool holders.

@JimmysCanal

6 жыл бұрын

Hello Addy, I apologize for the late reply. Thanks for your comment, I really appreciate it! You are right about the 1045 steel, it has excellent properties. But at that time I haven’t realizes that and convinced from a friend to use harder steel that can stand better the cutting forces, anyway now I know. Many viewers suggested me various ways for the alignment of the holder and I tried them all. I didn’t found bigger differences than 0.01 to 0.02mm, so I consider that is quite ok for the tool and the size of my lathe. And yes, it is impossible to set it to 30 degrees for thread cutting. Although that isn’t the original Swiss made Multifix, I do like its accuracy and repeatability. The only OCTP system that probably would make me change the Multifix is the KDK system, unfortunately it’s very difficult to find one plus that I don’t think that was ever come in small size to fit on mini lathes! And yes, it’s very difficult to make DIY holders for the Multifix, in my case simple impossible!! Thanks again for the comment and your time to watch my video. My best wishes to you and yours for the New Year! Jimmy

The measurement you did actually measured your tool holder alignment to the top slide movement. You are assuming that your top slide is travelling parallel to the ways of the machine. Better would be to mount the indicator base on the machine bed ways and move the whole carriage to measure the tool holder..

@JimmysCanal

6 жыл бұрын

Hi, I apologize for the late reply. Some other viewers suggested to measure inside at the holders back where the cutting tool touches. I tried it and the measurement was pretty much the same with what I had measure the first time. Anyway, thanks for your suggestion!! I haven't thought of it and definitely I'll try it and as I think it, probably is the best way to have a more reliable measurment. Thanks again for the suggestion! All the best Jimmy

Hi Jimmy, I'm wondering if you could get the "factory fit" part from Optimum in the first place so that you don't have to machine the part to make it fit? I'm asking that because I have d210-400 form optimum and its qctp is quite expensive. If your scenario is usual in industry and it is always expected for us to modify parts to fit even if supplied by OEM then I might as well look into non Optimum sources of qctps. Thanks, Bruno

@JimmysCanal

8 жыл бұрын

+Bruno Batarelo Hi Bruno, Thanks for asking! The tool post can’t be fit right away to the lathe (only if you order a new lathe and a QCTP to the supplier, then the factory adapt it for you) for your lathe it's the SWH-A . Because this belongs to accessory tools the manufacturer gives a data sheet with info and mounting instructions to do it yourself. Check this link: www.createtool.com/ these multifix clones are not have any difference with my QCTP, they must be modified also to fit on your lathe. I think that even if you buy another type of QCTP like the Aloris you will need to modify it to fit on your lathe, because of the design that the top slide has on all the small Optimum lathes. I hope you find a good quality QCTP in a reasonable price without to need to modify it. Thanks again All the best Jimmy

For that little short toolpost that's threaded all the way down in you could use any kind of metal any kind of steel I should say I can't see there being any kind of flexing in that short amount. I would just use 4140 I've never even heard of Swedish steel

At around the 7 minute mark you turn the bolt to fit the hole very precisely, then later you bore that hole larger. Very puzzling.

@JimmysCanal

8 жыл бұрын

Hi, Yes, it is a bit puzzling because I forgot to put some pictures with measurements. If you go on 3:44 you will see that after I remove the stud from the top slide it remains a small round metal piece (this is part of the casting and has 17.96mm diameter, I forgot to put a picture ). The crown gear has a hole at center with 13mm diameter (I mention this at 5:14), but I also forgot to put a picture with the measurement. So, I bore the center hole of the crown exactly 17.98mm x 6.58mm depth, go on 17:04 to see. I’m sorry for that. All the best Jimmy

@ExtantFrodo2

8 жыл бұрын

Okay, I see now. Thanks.

@JimmysCanal

8 жыл бұрын

Thanks for pointing this! Cheers Jimmy

Да.. Есть же вещи, которые радуют )

@JimmysCanal

7 жыл бұрын

Спасибо за ваш комментарий! Всего наилучшего Jimmy

check the back of the pocket where the tool will sit too

@JimmysCanal

6 жыл бұрын

Hi, Some other viewers pointed the same thing and I checked it. The readings are pretty much the same, so I think that's ok. Thank you for the comment, I appreciate it! Warm regards Jimmy

The run-out across the face of the tool holder doesn't really matter, I think if you are going to index the tool holder then it needs to be done at the back face where the tool bit butts against. or the tool it's self

@JimmysCanal

7 жыл бұрын

I apologize for the late reply. Thank you for the comment! Yes you are right, another viewer also told me the same thing. I checked it and adjust it. It works fine! All the best Jimmy

What does the side of the holder have to do with it? Shouldn't You measure against the cutting edge of the tool? To look for parallellism and/or any taper? I would put the indicator in a tool holder and check it against a test bar... Anyway - good explanations in a nice video! Thanks, Erling in Oslo.

@JimmysCanal

9 жыл бұрын

Thank you very much for your comment Erling! You are right! Perhaps I should have looked for parallelism inside, where the tool bit touches at the back of the holder? But it hasn't so much of run out anyway, only 0,05mm at the center of the holder as you already see in the video (please remember that I followed the instructions as the manufacturer shows in his technical sheet) Until now I haven't do any adjustment of the crown gear and the holder works perfect at any angle especially at the two basic 90° angles (parting and boring) Thanks again! All the best. Cheers from Greece Jimmy

Do you have 2 blood pressure?

Ωραίος!

@JimmysCanal

8 жыл бұрын

+Δημήτρης Καλησπέρα Δημήτρη, Ευχαριστώ πολύ για το σχόλιο! Ζητώ συγγνώμη που άργησα να απαντήσω, αλλά πρόσφατα μετακόμισα σε νέο σπίτι. Ακόμα προσπαθώ να βάλω τα πράγματα σε τάξη και βέβαια να ξαναστήσω το εργαστήρι μου! Φιλικά Δημήτρης Π.

@user-bw4rr4kd9n

8 жыл бұрын

+JimmysCanal Δεν πειράζει αδερφέ, καλή τακτοποίηση και γρήγορα νέα βίντεο!

@JimmysCanal

8 жыл бұрын

+Δημήτρης Γεια σου Δημήτρη, Ευχαριστώ και πάλι! Ελπίζω να μπουν όλα σε μια σειρά σύντομα. Καλό Πάσχα και πάντα με υγεία! Δημήτρης Π.

good

@JimmysCanal

8 жыл бұрын

+Renato Gusman Thank you very much indeed! Cheers Jimmy

Wow, you got a Christmas present in March! Nicely and precise done! I am contemplating to upgrade my Shars QCTP to the "crown" style QCTP as well, the qestion is comparation of price for (as many as possible) toolholders... Did you performed the case hardening of the stud by yourself? Can you kindly scan and send me the Quantum QCTP installation instructions, please? I would like to learn about the Quantum product all available information. thanks & regards Milan

@JimmysCanal

10 жыл бұрын

Hi Milan, as you said it's my 'Christmas present' in March!No, I gave the stud for hardening. I will send you all the info you want, but you must remember, that your lathe accepts-Optimum SWH-1A quick action tool holder.Thanks for your comment! Jim

@marioparedes5542

9 жыл бұрын

***** JimmysCanal Hi, I'm from Chile and my question is how to get this rapid change, if you can buy from my country and how much money goes to buy it. regards

@JimmysCanal

9 жыл бұрын

Mario Paredes Hi Mario I will send you information, look on your channel’s message box! Cheers Jimmy

What make and model is your lathe ?? I love it !!

@JimmysCanal

7 жыл бұрын

Hi Barry, Forgive me for the late reply. The lathe is made by Optimum Machines: www.optimum-machines.com/ and the model is D180x300. Now the company have changed the code number of the model and upgraded a bit. The new model is Opti turnTU 2004V: dk.tools/pdf/OPTIMUM/opti%20lathe.pdf Optimum Machines has a plant in China and most of their production are made there. All the best Jimmy

Nice job installing the toolpost, I have the same lathe and was thinking of doing the same upgrade. I had planned to use the size up (A) but note the smaller one you use (Aa) is a lot cheaper. Are you happy with the smaller one or would you now advise the size up.

@JimmysCanal

4 жыл бұрын

Thank you very much for your comment Mark, I really appreciate it! When I bought mine I didn't have many options on choosing between the two sizes for various reasons - but I will not stay on that because it will take long to explain. I'll say that I am satisfied; I think that the Aa size is perfect for lathes like ours and smaller ones like the Sieg C2, C3. What I call a short of ‘a problem’ with the Aa size is the fact that it can accept up to 12mm cutting tools, meaning limited variety on indexable tooling; now, with an A size toolpost you can choose among a wider variety of 16mm indexable tools, but using them must be with care since the lack of power of the lathe can't hold the cutting pressure will created, (higher speeds and feeds as well higher chip loads, otherwise these tools they will be dragged in the part instead of cutting it). Without been the expert here, I'll say that it will be wise to check the following links to see the measurements for the Aa and A tool posts - the Aa definitely fits on the lathe, but I don’t know for the A size: www.createtool.com/article.asp?id=41 Aa size www.createtool.com/article.asp?id=55 A size I think that if the A size fits and not been very big in size for the top slide, it will be nice only because you will be able to use some special 16mm tooling that they can do external face grooving and turning or external turning and grooving only by changing inserts. Again all the above are just my opinion and not by any means must be taken as expert knowledge! Here are some sellers you can check for prices: www.ebay.com/usr/createtool_china www.ebay.com/str/pewetools I hope that all the above will be some kind of help. Regards from Greece Jimmy

@markdymond5352

4 жыл бұрын

@@JimmysCanal Hi Jimmy. Thanks heaps for the advice, Really appreciate it Cheers, Mark

@GenePavlovsky

Жыл бұрын

Multiple multifix makers have another size option in between Aa and A. E.g. PeWe tools AS, Paulimot Ab, etc.

So Jimmy how is it working out for you after 2.5 years? Any problems? Thanks

@JimmysCanal

7 жыл бұрын

Hi Robert, It's working great without any problems, I'm very pleased! Although it was a bit pricey it's worth to buy! All the best Jimmy

it looks like you need to tighten the Gibs in your compound the way your indicator is wobbling when indicating square on the new toolpost.

@JimmysCanal

9 жыл бұрын

Thank you very much for the comment! The gibs was tightened properly. Another viewer pointed this also by saying that I should had look for parallelism, indicating on the cutting tool. So I did another test to check for parallelism by indicating inside the tool holder (I checked all the holders that I have), where the cutting tool touches at the back. I found that, with careful positioning and tightening the crown gear of the tool holder, I have a little less than 0,01mm run out at the center of the holder, I think that this is acceptable? Then I made another test, this was for check the squareness of the holders. I took two solid steel squares, the first was a common 3'' DIN 875/2 and the other was a 3'' Starrett master square. I was surprised by the results; all the holders have an issue with squareness!! this explains the 0,05mm run out on the first indication at the edge of the holders. Honestly, I didn't expect that a pricey tool could has a finish like this, anyway I must live with that! Thanks again for your comment! Cheers Jimmy

@chemech

9 жыл бұрын

***** Funny, I was watching that flutter on the indicator - not knowing that the divisions were 0.01mm - and I thought that it was picking up on surface roughness. Given that the edge you were indicating on is not really critical for the function, a finish roughness of 0.01mm (0.0004") harms nothing but the appearance of the part. And, the concavity of the center of the part of 0.05mm (0.002") doesn't bother me too much, since the ends are true to each other. I've worked with older US made machines that aren't that true in the functional areas, and could still make good parts. I found the Optimum brand machines for sale here in the US, and they are priced as if they were made in Germany, not just routed through Germany from China... You definitely would expect more for the asking price... Cheers, Eric

@JimmysCanal

9 жыл бұрын

chemech Hi Eric, Thanks for the comment! Definitely agree with you. The finished parts are exactly as you described on your comment!! and it not bother me, but always it remains the question "I paid so much to buy a tool, why isn't ok" Cheers Jimmy

@chemech

9 жыл бұрын

Hi Jimmy, It seems like fit & finish are no longer priorities these days... I'll guarantee you that the Chinese manufacturer was not paid enough to care all that much, and yet it gripes us to pay EU or North American prices to get a less polished article... And don't get me started on paying made in USA prices for files made in Mexico & India... The importer ended up apologizing to me and the retailer who sold me those particular files! Although, their replacements from their Mexican factory did turn out OK... So, it's not that imports are necessarily low quality, just too many importers who no longer care that much about their products... :^( Glad that your QCTP has turned out to work OK, even if the fit & finish isn't all that you would desire... Eric

@JimmysCanal

9 жыл бұрын

chemech Hi Eric, again your are right when you say "So, it's not that imports are necessarily low quality, just too many importers who no longer care that much about their products" also applies the big companies issue they don't pay enough to the Chinese, Mexicans whatever the country from, because the only thing they want is fast easy money! Unfortunately sometimes we can't do anything about this because we don't have any other option. Thanks again! All the best Jimmy

Great video! I have a 65x65mm base for my toolpost, what size multifix would you recommend? The Aa or A? :) I'm in a dilemma, the entire length of the lathe is about 1000mm, so its a small one, but i am worried that the Aa is a bit too small in fact :/

@JimmysCanal

9 жыл бұрын

Thanks for your comment Luka! It's difficult for me to say! To choose the right size tool post for your lathe, first you must know the center height of your machine (meaning you have to measure from the top of the vee way of the bed up to the turning center) or else to know the max. turning diameter (swing) of your lathe. The second is to measure the height from the base of the top slide (where the tool post sitting) up to the turning center. For instance my lathe has 90mm center height, 180mm max. turning diameter and the height from the base of the top slide to the turning center is 25,5mm. As far as I know the Aa size is suitable for lathes with turning diameter from 120 up to 220mm and the A size from 150 up to 300mm. Check these links: www.createtool.com/ www.createtool.com/article.asp?id=41 www.createtool.com/article.asp?id=55 you will find the technical data for the Aa and A size Multifix tool posts. Hope that helps you? Thanks again. Cheers Jimmy

@lukaradakovic5463

9 жыл бұрын

***** Hi Jimmy! Thanks for your reply! Yes! It really helps! I guess i was worried about the maximum size of the tool and didnt think about the other aspects that might cause a problem. When i get to my workshop i'll measure everything up and send you a follow up comment, hope thats not a problem? :) Thanks again for your help! Cheers

@JimmysCanal

9 жыл бұрын

Luka Radakovic Hi luka, Glad to hear that I help you a little! Feel free to post a comment! I would like to know about your measurements! By the way, what lathe do you have? Cheers Jimmy

@lukaradakovic5463

9 жыл бұрын

***** Hi Jimmy! Thanks, i will get around to it in a few days and post the measurements for shure so we can discuss the best option for a multifix. I have a Yugoslavian lathe, Cakovec Zagreb i712.photobucket.com/albums/ww122/therion_339/Machine%20shop/photo11_zps8a23abe4.jpg Its not the most sofisticated peace of hardware, but it's durable and i am retrofitting a bunch of new hardware to it so i'm hoping its going to turn out great once the new haidenhein linear encoders are in, the DRO setup and the dc motors with the cnc controls are put in, hoping to geat some interesting results with this spindle motor, got it out of a used treadmill :) i712.photobucket.com/albums/ww122/therion_339/Machine%20shop/photo31_zps433e0b85.jpg

@JimmysCanal

9 жыл бұрын

Luka Radakovic Hi Luka, Thanks for sharing this with me, you have a very nice machine there! Quick change gearbox, tumbler reverse, I like that! As for the modifications the only I can is that this is a big project!! When you finish your measurements send me a comment! Cheers Jimmy

Παρα πολυ καλή δουλειά. μπράβο. Μόλις πήρα και εγω ενα Holzman που μάλλον είναι το ίδιο με το optimum. ήθελα να ρωτήσω τι μανέλες να πάρω γιατί ενώ βλέπω οτι ο εργαλειοδέτης έχει περιθώριο μέχρι 16mm , δεν ξέρω αν αγοράζοντας μια μανέλα των 12 καρέ αν μπορέσω να φτιάξω το κέντρο. Μπορείς να με καθοδηγήσεις αν έχεις λίγο χρόνο. ευχαριστώ πάρα πολύ και για τον χρόνο σου και για τις πληροφορίες που δίνεις σε κάθε βιντεο σου.

@JimmysCanal

4 жыл бұрын

Ευχαριστώ πολύ για το σχόλιο σου Λεονάρδε, το εκτιμώ! Αν έχεις τον κλασσικό 4πλό εργαλειόδετη που έχουν οι περισσότεροι τόρνοι όταν τους αγοράζεις τότε η λύση είναι απλή, κάτω από την μανέλα βάζεις λεπτές μεταλλικές λάμες (δοκιμάζεις διαφορετικά πάχη) μέχρι να κάνεις τον σωστό συνδυασμό ώστε η μύτη του κοπτικού να είναι ακριβώς στο κέντρο της τόρνευσης. Να έχεις υπόψη σου ότι κατασκευαστικά οι 4πλοι εργαλειοδέτες έχουν πάντα 3-4mm μεγαλύτερο ωφέλιμο ύψος στην υποδοχή των κοπτικών έτσι ώστε βάζοντας λάμες να φέρνουμε το κοπτικό στο κέντρο της τόρνευσης, αλλά και λίγο πιο κάτω όταν αυτό είναι αναγκαίο (κοπή σπειρωμάτων, εσωτερική τόρνευση). Αν τώρα σκέπτεσαι να αγοράσεις αυτόματο εργαλειοδέτη σαν αυτόν που παρουσιάζω στο βίντεο, θα πρέπει να δεις εδώ: www.createtool.com/list.asp?cid=33 πιο μέγεθος είναι κατάλληλο για τον τόρνο σου. Βάση του περιθωρίου των 16mm, νομίζω πως το κατάλληλο μέγεθος είναι το Α: www.createtool.com/article.asp?id=55 συνιστάτε για τόρνους με δυνατότητα διαμετρικής τόρνευσης από 150mm-300mm. Αυτό είναι το link για το μαγαζί που έχει η παραπάνω εταιρία στο ebay: www.ebay.com/usr/createtool_china και αυτό είναι το link ενός Γερμανού πωλητή με μεγαλύτερη γκάμα σε εργαλειοδέτες και αντάπτορες: www.ebay.com/str/pewetools . Επίσης μπορείς να επικοινωνήσεις με την αντιπροσωπεία της Optimum στην Αθήνα: store.dk.tools/ και να συγκρίνεις τιμές. Μπορείς επίσης να δεις για αυτομάτους εργαλειόδετες όπως είναι οι Aloris, Dorian, Dickson κλπ. τύπου με πιστόνι η σφήνας. Ελπίζω η παραπάνω πληροφορίες να σε βοηθήσουν. Καλή συνέχεια! Φιλικά Δημήτρης

OLÁ , QUAL O CODICO PARA SER USADO EM TORNO DE BANCADA

@JimmysCanal

7 жыл бұрын

Olá, Espero que eu entenda corretamente sua pergunta. A marca do torno é Optimum eo número de código do modelo é D180x300. O poste de ferramenta é feito para o Optimum de outro fabricante eo número de código é SWH-AA. Cumprimentos Jimmy

Where is the optimum TP made? I cannot find their website.

@JimmysCanal

10 жыл бұрын

Hi, Probably in China. This is the link: www.optimum-machines.com Jim.

@HolzMichel

9 жыл бұрын

Krispin Gord it's a german company that has their components made in china and then they do the final assembly in germany so they can say "made in germany" on them. the performance of the machines is of course largely operator dependent, however i would not recommend buying them: short lifespan and mediocre quality. not worthy of the "made in germany" stamp. in order to make them work well and live longer than 3 yrs under normal use you would have completely rebuild the machine, put in new bearings (non chinese) and tighten the backlash in the gearbox.. then you might have something..too much work and expense considering the purchase price

@chemech

9 жыл бұрын

HolzMichel Well, I found their US Distributor is Grainger - not known for being a low-cost provider... For the 7x14 (180mm x 355mm) size, the price is about 3x what I would have to pay Micro-Mark or Little Machine Shop - not discount suppliers, but not the high markup places either... Thing is, for $700, I'm less concerned by rebuilding the machine after 6 months of daily use ( a particular project, and much more intensive use than the machine was ever intended for) - when the plastic high-low selector gear shattered... The Chinese bearings on the SIEG are a size commonly used for motorcycle forks, and the Japanese replacements were cheap, so I did them at the same time... If only the darned headstock casting wasn't so tiny... a really tight place to try to work! Cheers, Eric

its Awesome Tool. any one can plz tell me from. where i can get it?

@JimmysCanal

5 жыл бұрын

Hi, Thanks for your comment and please forgive me for the late reply. Here are some links for buying a similar QCTP: www.createtool.com/list.asp?cid=33 www.ebay.com/usr/createtool_china www.ebay.com/sch/pewetools/m.html?_nkw=&_armrs=1&_ipg=&_from= All the best Jimmy

Hi that looks a nice bit of kit i am looking for a QCTP for an old English lathe with a 3"swing would that work for ??what make is your lathe hope you can help thaks Andy

@JimmysCanal

7 жыл бұрын

Hi Andy, Thanks for your comment! I think that you can't use this size. This is the link of a Chinesse manufacturer: www.createtool.com/article.asp?id=41 you will find all the information about the Aa size QCTP. I have found also this ebay shop: stores.ebay.com/pewetools/Schnellwechselhalter-Aaa-/_i.html?_fsub=3675510012 Look for the Aaa size tool post, send a message and ask the seller to give you more information. Hope that this will help you a little. All the best Jimmy

I guess whoever that company on the box is, they are out of business now. Thanks for dodging that bullet for the rest of us!

Are these made by Optimum? Or maybe by Create Tool?

@JimmysCanal

4 жыл бұрын

I don't think Optimum made these, but I can't be either sure that are made by Create tool. The only thing that I can tell with certainty is that it is a quality tool but bit pricey because its says Optimum. If you want, check the prices on these two ebay sellers: www.ebay.com/str/pewetools/Schnellwechselhalter-Aa/_i.html?_storecat=3675511012 www.ebay.com/sch/createtool_china/m.html?_nkw=&_armrs=1&_ipg=&_from= Regards Jimmy

The only problem with this sort of lathe tool post design is that having to go back to working with any other system is really frustrating.

@JimmysCanal

5 жыл бұрын

Thank you for the comment! I apologize for the delayed answer, I was away from home for a few days and just now saw your comment. It's an excellent lathe tool post with great advantages, but personally I could work with any type of QCTP. The only problem for me is the fixed shoulder with the stud that is on the top slide of my lathe. If my top slide had a T slot it would be perfect, I would had better control on the clamping force of the QCTP as well as more positioning choices. Thanks again for your comment! All the best Jimmy

That sure is an expensive tool post. Anyway one thing that I don't understand is why are you doing the modification? Shouldn't it just fit the lathe right away - out of the box?

@JimmysCanal

10 жыл бұрын

Thank you for the comment! The tool post can’t be fit right away to the lathe (only if you order a new lathe with this QCTP, the factory adapt it for you). Because this belongs to accessory tools the manufacturer gives a data sheet with info and mounting instructions to do it yourself. So I turn-out the hole at the bottom of the crown gear based on the instructions, as for the stud that I make, is because the old was too high for the new tool post. Jim.

@juliusvalentinas

9 жыл бұрын

***** Seem like Optimum hasn't changed their attitude toward customers, who is so stupid to buy something you have to finish themselves? Or the design of the lathe is flawed if customer can't use accessories right away? I ordered Wabeco, and no I don't like their Multifix holder, I like AXA germany one. And believe me if I have to maschine something like this after 300Eur for holder I better return it and get the aloris toolpost

@chemech

9 жыл бұрын

***** I think that it's because Optimum buys the lathes from one manufacturer in China, and the toolholders from another supplier over there. Here in the US, the SIEG 7" (180mm) lathes from China are very popular, and the A2Z QCTP is an affordable Aloris style toolpost which is a very popular add-on. I do not recall needing to do any modifications to mount mine... (These lathes fill the niche which used to be the domain of the old Atlas/Craftsman 6x18 lathes.) The Chinese aftermarket wedge-type QCTP in the 200 size (BXA) which I fitted to my Chinese import 9x20 (230x500) required some fettling work. The funny thing is that the 200 size QCTP only required a custom T-nut to fit on the compound of my 12" Logan lathe built in 1954... Thing is, we have the tools to make the tools, and a little bit of work to make sure that things fit up correctly is just the price of doing business if you want to get the best performance from your machine(s)... Cheers, Eric

@JimmysCanal

9 жыл бұрын

chemech Hi again, here in Greece things are different. We don't have suppliers like - Little Machine Shop and Micro-Mark. There are suppliers who have tools for big machine shops and they import only a few things for small machines like mine. So it's one way, we must buy directly from the distributor (always expensive) or from a US shop. When I was looking to buy my QCTP, I saw the A2Z or the small version of the Aloris type, the 0XA. But the price of the tool+shipping+Greek customs, it was equal to the price I found here for the Optimum QCTP sad but true! Anyway, we must live with that. Thanks again for your comments! All the best Cheers Jimmy

@chemech

9 жыл бұрын

Hi Jimmy, I can understand why things are different in Greece - politicians everywhere have a tendency to pass laws with unintended consequences... And, our machining hobby is probably not something they would even conceive of as a possibility... Still, I'm a bit disillusioned that within the EU you have difficulties in getting affordable stuff... I've seen a few videos with Metafix - or clones - QCTPs, but they cost us as much here as they do over there it seems - ~$430 - about 3x what my A2Z ran here... Best of luck in dealing with your local conditions, and congratulations on the high quality work which you are producing! Eric

Buen video mi estimado amigo una pregunta como podría comprar un juego así para mi torno muchas gracias

@JimmysCanal

4 жыл бұрын

Gracias por tu comentario mi amigo, ¡realmente lo aprecio! Ahora, antes de continuar con cualquier compra, es importante que sepa el tamaño apropiado de QCTP para su torno; para hacer esto sigue este enlace: www.createtool.com/list.asp?cid=33 es un fabricante con sede en China (creo que Createtool suministra QCTP en la mayoría de las marcas de maquinaria poniendo sus nombre en la herramienta). Ahora, el enlace anterior abrirá una página con todos los tamaños disponibles de postes de herramientas y soportes de herramientas, desde el tamaño Aa hasta el tamaño E; haga clic en "MÁS" para ver datos técnicos y parámetros para cada tamaño. Por ejemplo, mi publicación de herramientas es de tamaño Aa; Los datos técnicos están aquí: www.createtool.com/article.asp?id=41 No sé si puede comprar directamente desde sus sitio, pero puede hacerlo fácilmente desde sus cuenta de eBay: www.ebay.com/usr/createtool_china Compruebe también este vendedor de eBay (con sede en Alemania): www.ebay.com/usr/pewetools Tiene una selección más amplia de tamaños de postes de herramientas y soportes: www.ebay.com/str/pewetools Espero que estas informaciones sean de alguna ayuda para que encuentres lo que necesitas Saludos desde Grecia Jimmy

γεια σου φιλε,το καλυμα που εχεις στο κρεβατι,το μαυρο σαν ακορντεον,πως λεγεται και αν ξερεις που μπορω να το βρω

@JimmysCanal

3 жыл бұрын

Καλησπέρα, Λέγεται φυσούνα και είναι προστατευτικό κάλυμμα για φρέζα θα το βρεις εδώ: www.arceurotrade.co.uk/Catalogue/Machine-Spares/Machine-Bellows Φιλικά Δημήτρης

@stavrious

3 жыл бұрын

@@JimmysCanal σ ευχαριστω

@JimmysCanal

3 жыл бұрын

Να είσαι καλά! Δημήτρης

βλεποντας τα βιντεο σας και το ηθελα βεβαια πηρα και εγω εναν optimum ειναι ωραια μηχανηματα αλλα αφου πηγα στην εκθεση metal machinery καταλαβα οτι οποιο μηχανημα και εαν εβλεπα ηταν ιδιο με αλλο χρωμα που μπορει να ηταν και απο το ιδιο εργοστασιο στην κινα και με διαφορες στα χρηματα απο οτι εδωσα εγω τελος διαβαζοντας παρακατω και υελω και εγω να βαλω qctp ποιο μου προτεινεται εαν θελετε ευχαριστω

@JimmysCanal

4 жыл бұрын

Καλησπέρα, Ζητώ συγγνώμη για την όποια καθυστέρηση στην απάντηση. Αυτό που λέτε σίγουρα ισχύει, υπάρχουν φαντάζομαι αρκετοί κατασκευαστές που απλά τυπώνουν την φίρμα της όποιας εταιρίας στα μηχανήματα, αλλάζουν ίσως κάποια χαρακτηριστικά βάση των προδιαγραφών που θα τους ζητηθεί, γιαυτο και όλα μοιάζουν μεταξύ τους. Τώρα για το QCTP, όσο αφορά αυτό που έχω εγώ μπορώ να πω πως είμαι αρκετά ικανοποιημένος, όμως θα πρέπει να ξέρετε ότι είναι σχετικά ακριβό. Έχω βρει δυο πωλητές στο ebay και έτσι θα μπορέσετε να συγκρίνετε τις τιμές (προσοχή μόνο στο μέγεθος που θα επιλέξετε, δείτε τις προδιαγραφές που δίνουν οι πωλητές έτσι ώστε να επιλέξετε το μέγεθος που ταιριάζει στο δικό σας μηχάνημα): www.ebay.com/sch/createtool_china/m.html?_nkw=&_armrs=1&_ipg=&_from= www.createtool.com/ αυτό είναι το site του παραπάνω πωλητή www.ebay.com/str/pewetools Από κει και μετά υπάρχουν τα κινέζικα αντίγραφα εργαλειοφορέων της Aloris: www.aloris.com/ και της Dorian: www.doriantool.com/wp-content/uploads/SEC-B-TOOL-POST-TOOLHOLDERS-2016.pdf τα οποία φαντάζομαι ότι είναι εξίσου καλά και λειτουργικά και σίγουρα φτηνότερα από τα αυθεντικά, ρίξτε μια ματιά στο ebay η στο Banggood. Ελπίζω να βοήθησα κάπως. Καλή συνέχεια!

@jimjimaros2145

4 жыл бұрын

@@JimmysCanal ευχαριστω

@JimmysCanal

4 жыл бұрын

Να είστε καλά. Καλό Πάσχα και πάντα με υγεία! Δημήτρης Π.

Very very small.....It's for a micro lathe.... J'hésitais à commander. Vue la taille, minuscule, je vais m'abstenir.

AA looks like a bit too smaller for this lathe. Right size would have been AS, or Ab as they call it in China. Probably Optimum doesn't sell it.

@JimmysCanal

3 жыл бұрын

Aa is the suggested size from Optimum, but AS can be used as well. Yes, Optimum does not sell the AS size. Take a look at thess links: www.ebay.com/str/pewetools/Schnellwechselhalter-Aa/_i.html?_storecat=3675511012 pewetools.de/produkt-kategorie/schnellwechselhalter/ All the best Jimmy

10:00 Are you doing this cause you have no mill?

@JimmysCanal

2 жыл бұрын

Yes, back then I didn't had a mill so the only way to make the two flat for the wrench was to use the small grinder.

@SantaDragon

2 жыл бұрын

@@JimmysCanal I would have used a file (is that written correctly?) xD

@JimmysCanal

2 жыл бұрын

Yes, you will have to use a file to flatten the slight curved surface that will created from the grinder's wheel.

What is this? A toolpost holder for ants!?!? It has to be at least... 3 times this size!

Well that’s tiny