OPM (Optical Power Meter) - Fiber Optic Tester training video
Ғылым және технология
The Optical Power Meter is small, light and easy to carry large LCD screen. It can be widely used in the test of LAN, WAN metropolitan network. It can be used to test Fiber loss accurately, to check the Fiber continuity and to help to evaluate the transmission quality of Fiber chain with the laser source.
It can be used to test Optical Power within the range of 800 ~ 1700nm wavelength, with the unit as nW, μW, mW, dB, dBm, its display resolution level and test accuracy are high. There are
850nm, 1300nm, 1310nm, 1490nm, 1550nm, and 1625nm, six kinds of wavelength calibration points. It can be used for linearity and non-linearity test and display both direct and relative test of Optical Power.
Пікірлер: 19
its very good informative .....
Perfect
Thanks to you done lods.
Can be use different brand power meter and light source meter?Pls assist
good
Can you post a link for the data sheet and where to buy the meter?
How to calibrate this mentioned Power meter i have this one but there is no way to calibrate
How do i correct my power meter adding dBm?
Orange fibre patches to me are MM and you have selected 1310 which is SM
@artistdigital
Жыл бұрын
1550 nm is more popular wavelength for SM
Please give me 1 piece for steren meter required..?
If the ref. 0db tht mean the loss is acceptable?
@sterentvchannel8301
3 жыл бұрын
To set the ref. to 0dB to measure the loss of the fiber cable under test
@interestingfact5771
3 жыл бұрын
kzread.info/dash/bejne/h3Vru65tltK1grQ.html
I have 1490 nm -19.18 dbm is good or bad ?
@AkiWataru
2 жыл бұрын
you gonna die
@ubaidzvlog
Жыл бұрын
Good
hi
0