if it's any consolation, the bubbles do add realness cos fish tanks have aerators to help add oxygen to the water 😌

@shawntaylewis7819

6 ай бұрын

I think the bubbles look awesome!!

@laurawessels2490

6 ай бұрын

I thought that too especially for the rectangular tanks

@juliebaker6969

6 ай бұрын

Exactly what I thought too.

@rebeccacattemull

6 ай бұрын

Yep the bubbles add to the effect.

@elizabethperez8395

5 ай бұрын

❤🎉😊like l

Nemo's dad is Marlin. I love how you created Marlin escaping to go and search for his son! Very clever and looks very cool!

I love your creativeness with the tank at the end, where the fish was jumping out. That was awesome!

I'm loving this idea of the fish coming out. I like that the coral is elevated as well gives it more motion like everything is falling out.

@GBKuhleen

6 ай бұрын

Glad you like it!😁

i love GB noticing science happen and pointing it out. The resin is foggy from the UV heat! 💕

@gr33ngirlsea

6 ай бұрын

Likely because the resin is so thick! Thick resin heats up extra while curing.

@juliebaker6969

6 ай бұрын

I think it's the residue from where he wiped the goo from the pebbles off. I think he should have tried to clean it off with rubbing alcohol before filling the tank.

@fisher7107

Ай бұрын

Yup! Small scale thermal runaway. More resin->More heat->Cures faster->Even more heat That’s one of the reasons these kits are meant to cure in the sun. It’ll cure a lot slower and you’ll get better results.

I've been making the fish bowls and tanks for a while now, and watching other youtubers do it. I think there's no way to avoid air bubbles no matter what you do. One time I got a fish tank and I let it sit uncured for a week just to get all the air out. It looked perfect before I cured it, but as soon as I did, giant bubbles formed. I think it's just the nature of this kind of resin. I've also tried mixing the gravel into the resin, setting it, then setting a layer of resin on top, then doing the rest in layers. Still got bubbles.

@indrahx5905

6 ай бұрын

How about adding only thin layers of resin at a time? Still the same?

@iiii5806

6 ай бұрын

You might need something like a vacuum chamber to really get all the bubbles out, but I don't know if that's an investment most people are willing to make.

@GBKuhleen

6 ай бұрын

I think the only way to eliminate every single little bubble, like @iiii5806 says, is to have some type of pressure chamber that sucks out all the bubbles. But that involves a lot of other risks, and it's not worth it at that point. lol

@mariedamientattoos8393

6 ай бұрын

This makes me feel so much better about how mine turned out 😭💜 I thought I ruined it!

@dragonflykissesbyhiedigrec9789

6 ай бұрын

@altoidsours have you tried regular fish pebbles instead of what they give you? To see if it’s a reaction to the chemical make up, between the resin and the make it’s pebbles. I really do think it’s this. But I’m not a scientist so.

Hello! As someone who works with epoxy for my business often, just wanted to share some insight for your bubbles issue. :] Because you are inserting the plant, and placing pebbles around it, tiny pockets for air are forming, when the resin is activating and curing the air is being displaced, this is why it did not occur with your fish, and just your plant, your fish was placed on top of tightly packed pebbles, from the tip of your tweezers. As for the clouding, this can be due to a couple of things, 1. the pebbles could have loose powder on them from rubbing together, this might be very unnoticeable until it is picked up and suspended in the resin, [ you could potentially negate this by rinsing and drying them, but that is hard to say without knowing what they are made of.] or swapping them all together for a fully dry and washable type of crushed stone. [ i would suggest crushed labradite for a very interesting look, as well as easy to clean residue off of and dry] the second reason this could be happening is if the plastic the "tank" is created from isn't made to withstand heat or resin, creating a clouded or fogged look when the heat reaction occurs during curing. Hope this helps! Oh! And finally, if you intended to try this again with a more controlled bubble look, you could reverse your technique, and insert the fish instead of the plant, which in turn would create bubbles around the fish, i think this is an act of free forming, so you will have to have faith in your eye for execution as well as your ability to roll with it. But this could be of use for future projects to create kenetic energy in these pieces such as the free flowing food pieces. :]

The clownfish jumping out of the tank was genius!! You always take these to the next level!

You have a pretty extreme black light. I think the resin curing generates a lot of heat, which results in a foggy look to the glass

@GBKuhleen

6 ай бұрын

And then for some reason it clears out, which is interesting/weird.

@JAGYT

4 ай бұрын

@@GBKuhleendo you know if there’s a way to make it clear mine isn’t that clear

@GBKuhleen

4 ай бұрын

@@JAGYT I honestly don't know. Mind just cleared by itself after it cooled down. Is it possible that your tank got fingerprints and or residue from the pebles?🤔

@JAGYT

4 ай бұрын

@@GBKuhleen could be fingerprints honestly

Hey GB! First of all...Great video! I love watching you be a little creative and thinking outside the box with the designs! The second fish is called a Beta fish and yes, you cannot put 2 males in a tank together because they are very territorial and will sometimes fight to the death. You can however put multiple females in a tank together and they'll be fine, but the female beta fish are kinda plain and boring looking. As far as the bubbles, you were on the right track with pouring in layers and setting the resin, but also continuing to pour small layers curing it each time all the way to the top. Another trick us "resiners" use is putting things that we're going to add to the resin (ie:the fish and the plant/coral) in a little bit of resin completely covering it and let it sit there for a minute or two first before adding it in, without curing it, it seems to coat things so that air bubbles can't form or escape from little air pockets. Hope that helps! Glad you're feeling better and keep making the cool videos! ❤❤❤

@GBKuhleen

6 ай бұрын

Hi there! Thank you so much for all the tips and tricks! Much appreciated!😍 And yes, I'm feeling a lot better!😁

@Honeyvixencos

4 ай бұрын

You can only put females together if the tank is big enough

the bubbles in the fish tank make it look more realistic

Fish number 1 looks better with that bubbles ❤️

I have fish and we have this bubble thing that makes bubbles come out of everywhere on the statue and the fish. Love it.😊

I think it looks good with the bubbles in side because water makes bubbles so I like I think you did a good job 👍....

I think for the fish tank you have to do it in layers to avoid bubbles :)

I haven't seen your channel before this and really like the format of not having to wait for each ball to get all the plastic layers off first. Everything is nice and to the point of getting to the fun parts of the items. I'm definitely going to subscribe.

The bubbles are really nice, I can't think of a healthy fish in a tank without the air/filters in their tanks.

Customizing the fish escape diorama was an awesome idea. It turned out fairly well. Cool.

That levitating anemone is actually some great character to the tank, it makes it look like Marlin wants to find his son so bad. He created a whirlpool to launch himself out, and the anemone is being sucked into the center of the tank

WOW! The fish jumping out was a GREAT IDEA. So cool. Glad you are feeling better 💕😃💕

@GBKuhleen

6 ай бұрын

Thank you!💛

Brilliant effect with Marlin jumping out of the tank!

I like the bubbles, gives a more realistic effect. The second fish was a Beta or 'fighting fish". Glad you are feeling better.

I did like the effect of the bubbles, it gives it realism and in my opinion it look better❤❤

I bet you could reuse the little "bags" that the fish come in with a clear fish resin film and some clear resin to make some cute little charms! I've seen something similar online and they are really adorable :3

Hi, GB! 1) Great you're well now. 2) The Nemo one is a great idea, kudos. 3) Have you seen the big sets? There are a pizza party and an ice cream party, and even a big store with loads of ingredients in a nice case

@GBKuhleen

6 ай бұрын

Hi there! 1) Yes, it's so good to be back. 2) Why thank you! 3) Yes, I keep seeing them on the shelves.😁 One day I might get some.

Bubbles look nice! I’ve seen some creators fill the entire tank with resin and let it sit for 24 hours or more. Supposedly helps dissipate the bubbles but I’ve still seen them get a few smaller ones. I’ve also seen people using epoxy resin use a match or flame to get rid of bubbles. Not sure if that’s an option for UV resin though!

@GBKuhleen

6 ай бұрын

Interesting...thanks for the tips!🙂

@hellomandarkk

5 ай бұрын

He needs to use a lighter to pop the bubbles before curing. Also it's not high quality resin. Some just turn cloudy 😢

Just discovered this account and I am OBSESSED. I looooove the lil custom tweaks you make to them, like the fish jumping out!!!

I'm happy you're feeling back to normal. 😊🎉

Love how little one couldnt eat the flower but Momma gobbled it down.

The bubbles make the fish tank appear realistic. Anyway, love watching your mini verse videos. Watching from Philippines.

The jumling fish looks really cool!

Thank you so much for making these videos! (I bought a kit once and the resin smell made me sick 🤢.) I really love the custom job you did with the clownfish at the end- so creative and cool!

I like the bubbles. It looks realistic to me

I think the bubbles look so good tbh!!

This is my favorite fish 😊 I love your creativity

I love your version of “Nemos dad”s tank! That’s the whole fun of the Make Its!! Making it your own and learning along the way! Oh how the ideas that come spilling forth the more you create!

The bubbles are out of the plant, this can be fixed by letting it sit before curing or you can try to tap them out before curing. I have seen a few other creators have this exact same problem, and these were there fixes

Omg that nemo is so creative!

I really like how you're being creative with these mini verse items. Adding "Frozen Moments" and just thinking of different ways to build the sets compared to the examples. So awesome! Great job! 👏😀 I hope to see more from you in the future, I've basically binged all of your videos 😅

when i had a fish bowl i mixed a little resin and the pebbles before curing and it still made bubbles. i think they form primarily when curing a large volume at a time because of the heat it gives off during the curing process. only way i can think to avoid it is by curing thin layers at a time while making sure to shove resin in any cracks and crevices that may contain air pockets, but then you run the risk of visible lines in the final product.

I love ur videos, and I love how you put so much effort and make the mini verse so neat. ❤️

@yourkarenn

6 ай бұрын

ty for hearting the comment, I love ur channel ❤️

The idea for the last tank was awesome❤

We look forward to seeing more unboxings like this. Keep up the good work.

@GBKuhleen

6 ай бұрын

Thanks! Will do!

I think the bubbles in the tank look neat. It's like the filtration / oxygen system that you normally find in fishtanks.

I love the clown fish in the end!!! soooo cute!

That’s definitely awesome!!! I definitely want to get a little more creative with my minis now lol

Interesting with the change in the cloudy water. Love the background music, makes it so relaxing to watch.

I love it..I love your videos I find your voice is very soothing plus I love seeing all the mini items 🤩🤩🤩

Great job! Love that last one!

The lifestyle minis are just so adorable!😍

Dude the clown fish (Marlin/Merlin) escaping was genius.

The fishies are awesome expressly the last one

I just started watching you last night and now I'm hooked. Love your ideas and videos and now I want to try these

If you use a straw and gently blow your breath onto the resin, it will help pop the bubbles. Also, you can heat the resin in some warm water and it will thin out the thickness.

Happy Black Friday I really enjoy watching this video saying I'm a huge fan of Aquatics, I hope you are feeling much better and completely healed now

@GBKuhleen

6 ай бұрын

Right back at you! You are? And yes, I'm feeling much better, I'd say I'm 99% back to normal!😀

Fantastic video 🎉🎉🎉 Incredible frozen mini verse moment🤩🤩🤩 Loved the minis that you shared and looking forward to seeing more when you are feeling more like yourself ☺️☺️☺️ Always stay golden and keep getting better 💖💖💖

@GBKuhleen

6 ай бұрын

Thank you so much!😊💛

Glad to see u back posting again, I hope ur geting better.

@GBKuhleen

6 ай бұрын

Yep, I'm back! Thank you!🙂

@TheCelestialCutie

6 ай бұрын

also to answer ur question to12:33 Nemo's dad's name Is Marlin@@GBKuhleen

to avoid bubbles in resin you have to put a flame over it

Hello GB! I love the bubbles in the tanks! I think it adds character and realism.😊❤

I made several of the circular fish tanks...all of them had bubbles...bummer. Love the frozen moment lifestyle mini you made. Awesome!

Wow it’s cool 👍🏻 and love miniature fish 🐠 tanks and candles 🕯️ too. Thank you sharing your video.

Love the Nemo (Marlin is his dad) jumping out of the bowl! Glad you are feeling better!!

I like the bubbles in the fish tanks, makes it look really realistic and I think it looks better than if there wasnt any bubbles. I love the fish tanks ❤❤

❤last fish is great! Very creative! Thank you for sharing while being sick!

New to your channel. I work a high stress hospital job, and I really appreciate the calm nature you present in your videos!

Very imaginative! And artistic! Bravo!

I love the last one! So fun! 😍😁

That last fish tank looks awesome

The action shot of Nemo’s dad is amazing!!!!!! 😻

Looks fabulous! I love watching you make these, thanks for all your hard work!

@GBKuhleen

6 ай бұрын

Thanks so much 😊

I have a couple of these to make yet. Glad I watched your video, so I know that the resin clears up.😊

To avoid bubbles you can take it layer by layer and use a toothpick to pop them before hardening

What a creative idea! He actually looks like he's jumping out of the tank❤️

This is a great thing you are doing because you are a great person and I need you to never let anyone get in what you do and you are my best friend

The Aquarium looks good. I have the Plants with the Cat Pot 😺

I love all your creativity, but the tank at the end was awesome ❤❤. You are getting me thinking about mini’s

Hi GB, loved the way the bubbles looked in the first tank and your attempt at the escaping fish 😂 - hope you feel 💯 now. I had dreaded c19 last week so I totally sympathise. Love watching your videos, even though I am 54 😂- I love crafting and we didn’t have things like this when I was a kid so it’s nice to watch. Have a good week.

@GBKuhleen

6 ай бұрын

Hi there! Yep, I'm back to normal now (well, maybe 99% back to normal). So glad to have you here, and to know that you are enjoying the videos!😁

All your creations looked so good!! The last fish tank was perfect!! His name is Marlin!

@GBKuhleen

6 ай бұрын

Oh thank you!🙂

I haven't even finished watching 😂😂

Omg finaly someone Who did something different whid The dubbel😊😊

Who else just loves mini verse

I hope, by now, you’re feeling better. I got the round fish bowl and actually disliked it so much that I threw it away. I wonder if it would have eventually cleared up. But I’m learning a lot from you. I’ll know better the next time. Thank you. Your Cranky Turtle Viewer in WV ☕️🐢💙💛

LOVE the fish tanks my favourite minis in sooo long 😍

Hey GB! I have two fish tanks of my own, the red eared slider and the pink betta, and they both have bubbles inside their tanks. I’m not sure why that happens, but I think it’s cool! As for the foggyness, it should clear up a lot more as the resin cools down from the UV heat!

I have the lavender candles and they actually are scented! ❤

Hello Golden Boy 💛 Happy Saturday! 🎉 Can't wait to watch! I can't believe they have series 3 out already. I barely got any series 2...seems fast, at least give us a little time in between series. Lol anyway ...is what it is and I'm so glad they're keeping up with the demand...they're quite popular and I totally get it! Haha! Lots of Love sent ur way from Maine. 😊❤

@GBKuhleen

6 ай бұрын

Hi there!😊 I know, right? I never liked when Mini Brands did that (release a new series so soon), and now it seems that Mini Verse is doing it too!😂 Thank you thank you!❤️❤️❤️

If you go over the top with a long lighter as the bubbles appear, they will go away. Its a normal bi product of the resin setting process. The fish is a Siamese fighting fish, also known as a Betta.

We can just say the plant is pearling in the fish set!

Everyone I have watched and even myself have those air bubbles. I think it is from the pebbles trapping air. hope you are better, I am now sick myself.. loved the last one!

@GBKuhleen

6 ай бұрын

Oh nooo, I hope you'll feel better soon. I now know first hand how it is, and don't wish it on anyone.😩

I love fish I would absolutely love these.

I would mix the pebbles with the resin and leave it for a bit fro the bubbles to come to the surface and pop them then cure see if that works

@GBKuhleen

6 ай бұрын

That's a great idea! Thanks!🙂

The fish escape was so cool! I was binge watching a bunch of the make it mini food videos you did and just when I was thinking that these were cool but you couldn't do a frozen in time version with these, you absolutely came out of left field with that and knocked it out of the park!

@GBKuhleen

5 ай бұрын

Awesome! Thank you!😁

❤ love the custom one you did ❤

You always seem to make the most unique frozen moments!! Love the clownfish ❤

@GBKuhleen

6 ай бұрын

Thank you!😊

Hello im new just subscribed yesterday and I already watched more than 10 videos lol i love ur videos they are relaxing to watch. Thank u for the videos ur kool!

I'm glad you're back and healthy ! Missed you last week 🤗

@GBKuhleen

6 ай бұрын

Awww, that's so sweet!😊

I have the same fish and a few others. I've tried almost all methods and there's still bubbles forming only after it cured. I even tried layering and it's a disaster, I can see the layers that I have built just to prevent the bubbles and still there's some bubbles in the tank. I tried mixing the sand with resin, setting the sand with resin, layering, it's all the same. Not sure how else to prevent the large bubbles from forming. The tank will be very hot and foggy after curing so just let it sit out and cool down, the fog will be gone. I really like the idea of that clown fish getting out of the tank. Never thought of that. Anyway, get well soon. It's the sick season and I'm not well either. It's been weeks. Just hope you will feel better soon. Take care GB! 😊

I think bubbles make it look even realistic like if it was an air tube of oxygen

If u put the pebbles in first it makes it easier to put the plant in

Found your channel 2 days ago and after basically binging your content for most of the day subscribed! Keep up the great work. You are so entertaining to watch and enjoy the feedback yo provide about the products you open

@GBKuhleen

6 ай бұрын

Oh that's so cool! Welcome welcome! So glad to hear you enjoy the content!💛