INSTRUCTIONS github.com/LibreDMR/OpenGD77_... MAIN SITE www.opengd77.com/ www.opengd77.com/viewtopic.ph... RT3S PURCHASE ebay.us/Gmzb1X
Жүктеу.....
Пікірлер: 37
@pmr446 Жыл бұрын
It expands the capabilities of the radio in so many different ways. Especially the scan speed now rivals that of a high end scanner.
@HamTechRadioScannerDrones
Жыл бұрын
I have alot to learn enjoying tinkering I do like a colour screen tho.
@gregoryaisemberg20376 ай бұрын
I will watch this video carefully several times until I feel confident to proceed with the upgrade. Yes, I do want the OpenGD77 on my Retevis 3S, KN6ZFM.
@HamTechRadioScannerDrones
6 ай бұрын
Ok
@m7spi Жыл бұрын
Thanks for this took the leap and got it installed but still learning the controls
@HamTechRadioScannerDrones
Жыл бұрын
So good.
@humaxf1 Жыл бұрын
I have a baofeng dm1801 with the open firmware. Pressing one of the side buttons reveals the rx and tx frequencies of a memory channel - is this the same for RT3s? Also I'm assuming that the channel knob changes channels? Thanks
@HamTechRadioScannerDrones
Жыл бұрын
OPEN GD77 MEMORY CHANNELS M0FXB
@stevefox37633 ай бұрын
Is the pinout for the programming cable different on the RT3S to the Baofeng DM1701? I made my own cable for the DM1701 but my pc says the RT3S is an unrecognised device, its not a driver issue, its the USB itself failing to find a device ID.
@HamTechRadioScannerDrones
3 ай бұрын
No idea seems alot hastle better to buy a cable .
@gregoryaisemberg20376 ай бұрын
Andreas, I'm worried I might mess up the radio downloading the opengd77 on my Retevis RT S3. Is it really worth it? The original firmware aesthetically is much more pleasing.
@HamTechRadioScannerDrones
6 ай бұрын
Yes massively improves Radio I understand you are worried when doing firmware .
@majorkonfuzion10077 ай бұрын
That elusive programming cable
@HamTechRadioScannerDrones
7 ай бұрын
They only 7 pounds :
@dj1da9526 ай бұрын
What cable are you using, i got a cable by Retevis but is it true that the RTS3 GPS and Non GPS use a different type of Cable without a serial converter in the cable?
@HamTechRadioScannerDrones
6 ай бұрын
Buy the cable for the RT3S
@POMEMRAH Жыл бұрын
port hatası alıyorum nasıl çözerim yardım.. usb dfu kurulu sürücüler tm ama port görmüyor opengd77
@HamTechRadioScannerDrones
Жыл бұрын
It wont be a port look in dfu.
@jeffkardosjr.382511 күн бұрын
2:47 I'm confused. Where did you get this folder on the desktop from? Was it a download.
@HamTechRadioScannerDrones
11 күн бұрын
Take your time watch lots Videos look in description.
@filipecreton Жыл бұрын
essa versão do retevis rt3s é mais antiga? o novo chip clone não esta aceitando o open gd77
@HamTechRadioScannerDrones
Жыл бұрын
Yes older
@jeffkardosjr.382511 күн бұрын
I can't get this radio to be recognized on Windows 11. I've tried it both with pressing the 2 side keys when turning on and without.
@HamTechRadioScannerDrones
11 күн бұрын
The drivers are installed when you install the CPS Software .Follow the steps slowly and carefully .
@jeffkardosjr.3825
11 күн бұрын
@@HamTechRadioScannerDrones I just installed the 3.0.1.0 drivers a different roundabout way. I opened the default RT3S software and the software does a download from the radio, but doesn't seem to be showing any saved memory channel data from the radio.
@Dougsterxplor Жыл бұрын
If I install this do I just write my own code plug into it or do I have to completely reprogram everything?
@HamTechRadioScannerDrones
Жыл бұрын
Complete re write u may be able to imort items.
@Dougsterxplor
Жыл бұрын
@@HamTechRadioScannerDrones thought that. It's what's putting me off for now.
@rogersmith492610 ай бұрын
Wich button i have to push to get in the TEST mode, thanks
Пікірлер: 37
It expands the capabilities of the radio in so many different ways. Especially the scan speed now rivals that of a high end scanner.
@HamTechRadioScannerDrones
Жыл бұрын
I have alot to learn enjoying tinkering I do like a colour screen tho.
I will watch this video carefully several times until I feel confident to proceed with the upgrade. Yes, I do want the OpenGD77 on my Retevis 3S, KN6ZFM.
@HamTechRadioScannerDrones
6 ай бұрын
Ok
Thanks for this took the leap and got it installed but still learning the controls
@HamTechRadioScannerDrones
Жыл бұрын
So good.
I have a baofeng dm1801 with the open firmware. Pressing one of the side buttons reveals the rx and tx frequencies of a memory channel - is this the same for RT3s? Also I'm assuming that the channel knob changes channels? Thanks
@HamTechRadioScannerDrones
Жыл бұрын
OPEN GD77 MEMORY CHANNELS M0FXB
Is the pinout for the programming cable different on the RT3S to the Baofeng DM1701? I made my own cable for the DM1701 but my pc says the RT3S is an unrecognised device, its not a driver issue, its the USB itself failing to find a device ID.
@HamTechRadioScannerDrones
3 ай бұрын
No idea seems alot hastle better to buy a cable .
Andreas, I'm worried I might mess up the radio downloading the opengd77 on my Retevis RT S3. Is it really worth it? The original firmware aesthetically is much more pleasing.
@HamTechRadioScannerDrones
6 ай бұрын
Yes massively improves Radio I understand you are worried when doing firmware .
That elusive programming cable
@HamTechRadioScannerDrones
7 ай бұрын
They only 7 pounds :
What cable are you using, i got a cable by Retevis but is it true that the RTS3 GPS and Non GPS use a different type of Cable without a serial converter in the cable?
@HamTechRadioScannerDrones
6 ай бұрын
Buy the cable for the RT3S
port hatası alıyorum nasıl çözerim yardım.. usb dfu kurulu sürücüler tm ama port görmüyor opengd77
@HamTechRadioScannerDrones
Жыл бұрын
It wont be a port look in dfu.
2:47 I'm confused. Where did you get this folder on the desktop from? Was it a download.
@HamTechRadioScannerDrones
11 күн бұрын
Take your time watch lots Videos look in description.
essa versão do retevis rt3s é mais antiga? o novo chip clone não esta aceitando o open gd77
@HamTechRadioScannerDrones
Жыл бұрын
Yes older
I can't get this radio to be recognized on Windows 11. I've tried it both with pressing the 2 side keys when turning on and without.
@HamTechRadioScannerDrones
11 күн бұрын
The drivers are installed when you install the CPS Software .Follow the steps slowly and carefully .
@jeffkardosjr.3825
11 күн бұрын
@@HamTechRadioScannerDrones I just installed the 3.0.1.0 drivers a different roundabout way. I opened the default RT3S software and the software does a download from the radio, but doesn't seem to be showing any saved memory channel data from the radio.
If I install this do I just write my own code plug into it or do I have to completely reprogram everything?
@HamTechRadioScannerDrones
Жыл бұрын
Complete re write u may be able to imort items.
@Dougsterxplor
Жыл бұрын
@@HamTechRadioScannerDrones thought that. It's what's putting me off for now.
Wich button i have to push to get in the TEST mode, thanks
@HamTechRadioScannerDrones
10 ай бұрын
What is test mode ??
Will it work on UHF rt3
@HamTechRadioScannerDrones
6 ай бұрын
No
Tell me please, where to buy RT3S?
@HamTechRadioScannerDrones
Жыл бұрын
Hi good place on Ebay:ebay.us/Gmzb1X
@JohnSmith-sl9dm
Жыл бұрын
@@HamTechRadioScannerDrones Thank you!