No video
OPEN ME UP! Dyson V10 and V11 Complete Disassemble and Clean Updated
This is a complete disassembly of a Dyson V11 and V10. This video is extremely long and you will need to watch the other 2 videos on my channel to hel you understand how to remove the connector
Пікірлер: 226
Thank you very much, you provide instructions that the manufacturer does not provide. I am very grateful to you
I would not have been able to fix my broken trigger without this walk through. Can't thank you enough
Also I did not have an extension for T8 screwdriver and no shops open late at night so because the screwdriver reached the screw in the switch housing but not long enough to grip I used a clamp/multigrip thing to turn the screwdriver and this worked. Just a tip if this can help anyone else.
👌Brilliant. Wife was off to by a new hoover. Your great instructions cost me £7 for the part and saved me £400. What can you say?
@adicbn
8 ай бұрын
Buy the man a drink 😂
Thanks for that. Would never have been brave enough to pull one bit apart, especially with the "prise that bit with a screwdriver" requirement!
dyson vacuum cleaner looks simple but it is very complicated when it comes to toggle, thank for your simple explanation, with simple tools.
@OpenMeUpTec
8 ай бұрын
there is a newer version of this video that has more steps on my channel
Hello big. Now I changed that part and honestly I didn't have any major problems. Thank you very much for this video and if it wasn't for you I certainly wouldn't have succeeded. Thank you once again and I wish you a nice evening.
@OpenMeUpTec
4 ай бұрын
i have a newer version of thi video with more steps and instructions incase you need soemthing
Thank you good sir! That red ring rubber and plastic ring thing came off when I was emptying the canister. This was great to figure out how to put it back together again.
Thank you for taking the time to show complete disassembly; I couldn't have figured it out by myself. It appears that Dyson does not want their vacuums to be repaired. I cannot find replacement parts or repair literature anywhere. You noted in the video the bin retainer breaking on a removable plastic piece required replacement of the whole cleaner; the part is not sold. Likewise, on my 3 month old V11, the retaining fingers on the small plastic clip that holts the electrical connector in the machine end of the long vacuum tube broke. It has a part number on the clip, but a Google search on the part number returns only ads for Dyson vacuums. Thus, only the complete $50 tube is available instead of a $1 part to fix it. Glad its under warranty. To clean my V11, I simply use an electric leaf blower to blow out all the openings and HEPA filter. It works great!
@OpenMeUpTec
Жыл бұрын
the bin sider can be purchase on ebay. i got mine there for 15AUD second hand
Brilliant video. Thank you. Without you I would never have worked out what was wrong with the vacuum cleaner, got it apart and back together. Fantastic.
@OpenMeUpTec
Жыл бұрын
thanks for your support
@OpenMeUpTec
Жыл бұрын
thanks for your support
Thank you x10000000 for this video. Saved me hundreds of dollars; I was able to glue my broken trigger together and restore functionality instead of buying a whole new vacuum! BTW, all of the screws identified in this video as T8 Torx are in fact T9. T8 works if that's all you have, but it's not the right fit. Use T9 if you have one!
@OpenMeUpTec
Жыл бұрын
i have a newer version of the video with updates. but you can buy the trigger online it coust $5AUD for a new one
Thanks for the video. Improved functionality when we were getting close to giving up on it.
My trigger broke. This was an excellent guide. I got as far exposing the white dust cover of the control board but didn't know what to do next. I have a V10 and it is glued also. I had to carefully cut and break away the glue to take it apart further but I finally got the trigger assembly out. The trigger is simply too thin and broke after repeated use.
@OpenMeUpTec
Жыл бұрын
i have the newer version of the video which shows you how to replace the tigger
Excellent guide for opening up my V11, Like previous poster - broken switch trigger, repaired with SuperGlue
@OpenMeUpTec
Жыл бұрын
it is not going to work for long. you can buy replacement triggers on ebay for $5AUD
This was extremely helpful, thank you! My Dyson V11 trigger broke, so I referred to your video and fixed it without any issues.
@OpenMeUpTec
Жыл бұрын
i had a newer video in my channel that shows you how to remove the trigger as well
Very handy thankyou! I didn't bother taking the connector out - just cut the wires then resoldered and heatshrinked.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
you really saved my life and time with this beautiful guide. thank you so much
@OpenMeUpTec
2 жыл бұрын
thanks for your support
There's an easier way to temporarily disconnect the wires! It can be removed from the main motor section by taking apart each section to access the screws to dismantle but then refitting loosely to gain enough access to pop the rubber boot that holds the pins in place from the cyclone zone using a flat head screwdriver and a little force. Then it's just a matter of removing the boot by prying the clip open. To reconnect, loosely fit all the parts together so that the wires protrude enough to refit the boot and then simply pull back into position and then refit as disassembled. Saves so much time!
@fredthebulldog529
2 жыл бұрын
Yeah I was thinking this as I'm watching the video and trying to disassemble mine. Didn't seem like you need to fully remove all the wiring. I was able to pry out the wires from the end connector that goes to the attachments by just using a flathead screwdriver and a little force to pop out the clips.
@idfx1000
2 жыл бұрын
I think his point is that you will only be able to do that a couple of times, as it damages the connector.
Thanks for the video. Helped me a lot fixing my V10.
@OpenMeUpTec
8 ай бұрын
there is a newer version of the video that has extra stuff
Thanks for the teardown. I was unlucky enough to have to replace the housing around the filter and trigger. Your video really helped me out with the removal of the white plastic inside.
@OpenMeUpTec
Жыл бұрын
i have a newer video and it show you how to do it.
For those out there who plan to routinely disassemble for cleaning, skip the entire plastic shim and chopstick routine, and instead, cut the wires, and then attach crimp or solder on bullet style wiring disconnects to the wires...then, in future cleaning cycles, all one has to do is unplug the bullet connectors to service the cyclone
@OpenMeUpTec
2 жыл бұрын
in my first video i did that and alot of people complain about it. they dont want to cut the wires
@zlinedavid
Жыл бұрын
This was my first instinct as well. I used a two wire automotive style connector, just to have an added degree of dust proofing.
This is incredible - And I never comment on videos. Super useful, saved me precious time. The plastic on the cleaner-top of the dust bin just chipped away when I was disassembling for cleaning... felt a bit cheap honestly. If ever, Dyson Europe has good client service, but there is also eBay that seals parts if ever. Cheers and thanks!
@OpenMeUpTec
2 жыл бұрын
thanks for your support
Thank you so much for this video. My bin came apart and Dyson was worthless on how to reassemble it. You saved me the purchase of a (pricey) new bin.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
I would like to thank you for this video. I think I would not have been able to fix it or I may have broken something along the way if I had not seen your video. Many many thanks.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
This helped me fix my minor issue, thank you very much!
@OpenMeUpTec
Жыл бұрын
thanks for your support
Thanks for this video! It helped me put together again my vacuum canister!
@OpenMeUpTec
Жыл бұрын
thanks for your support
Very useful ! Working great. New life for my Dyson for less than 10 euro (including screwdrivers). Thank you
Had to replace the trigger. Would not have got there without the video. Thanks!
@OpenMeUpTec
2 жыл бұрын
thanks for your support
Hi. Thank you for the excellent guide. I just repaired the trigger in my V11. I had to use crazy glue and JB weld on the one arm of the trigger that cracked (cheap plastic), and now it works. Your guide was PRICELESS.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
Silly question but which Phillips screwdriver can I use to open mine? I can't seem to find one thin enough to fit in the hole to unscrew the 4 screws on the base. The ones that I have that do fit, are too small.
@OpenMeUpTec
2 жыл бұрын
you will need to buy a set of long phillips head screw drivers as they normally cover all the sizes
video was a great help!! thank you very much!!!
You saved my life, bro! THX!
@OpenMeUpTec
Жыл бұрын
thanks for your support
Thank you! If not for this video I would have bought a new vacuum, instead of getting a $10 replacement plastic switch as it was snapped.
@OpenMeUpTec
6 ай бұрын
lucky you have an older one. the new ones they glue the area so you can remove the switch
Thanks your video helped a lot.
Super vidéo...merci !!! Vous être superb!!!!❤
The gray graphite donuts are made of a ferrite material and are referred to as toroids. By looping the conductors through them electro-magnetic fields are setup and aid in reducing electromagnetic "noise." This is often required to comply with FCC interference requirements.
@OpenMeUpTec
3 жыл бұрын
thanks for explaination. i always wanted to know what they did. as some things have them and others dont
@hectorpascal
2 жыл бұрын
To expand Jeff's comment slightly, the toroids form a "common mode choke" intended to reduce the high frequency components of the electrical noise generated by the motor, that can interefere with TV and radio reception.
Justo quería mirar como colocar el cilindro y no se ve como se coloca al armar el aspirador .
This is an amazing guide, it's been driving me nuts having dirt in the rubber seals of the bin and I got the end flap ones out but had no luck with the vacuum side.. perfect! I think it's a real fault, especially for the price, that its not easier / more intended to disassemble this bin at the very least and honestly cleaning the cyclones easier would be nice too. The unit is obviously quite a lot louder now than when I first got it - air noise wise.
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@OpenMeUpTec
Жыл бұрын
thanks for your support
your are an absolute legend, this videos was an awesome help.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
Amazing video, you walked me through it and now my dyson is deep cleaned! For future concerns, what would happened if I did not correctly insert the black and white wiring? What are signs of problems?
@OpenMeUpTec
Жыл бұрын
the head doesnt spin thats all. if you put it in the wrong way it will spin the wrong way
How do you get the screws out of the part under the purple filter cap? I can't see what I'm doing bc the space is so tiny and down a narrow cylinder. So I'm blindly twisting the screwdriver. Each time I check with a flashlight, the screw doesn't look like it's moved
@OpenMeUpTec
3 ай бұрын
can you watch the video and tell me at what time you are having issues with. i have a newer version of this video with more steps and instructions
Fabulously detailed for cleaning, but doesn’t this void the warranty? Does dyson have a cleaning/maintenance service for their vacuums??
@OpenMeUpTec
3 жыл бұрын
of course it will void your warranty if they find out. there is no maintencance service since doing what is in the video is unecessary, as dyson gaurantee the vacuum never loses suction.
Well I watched the video and because I wanted to clean the mesh screen and make sure the Cyclone is clean too and disconnecting the wires and the connector and all that I bypassed all that and grabbed my 20 volt benchtop blower I bought from Harbor Freight it has like a 200 mph wind and I blew actually they're Take It Outside cuz it will make a cloud dust like you really don't want in your house anyway forwards and backwards man that thing is clean and I didn't have to disassemble all so much I did take the four screws out of the first part that contains the connector but left the rest of it intact just two separate pieces with the wires hang in and the connector still in place but yeah take that high pressure and blow it kind of blow a cloud out the back where that filter on the back goes and then you blow it the other way through the Cyclone it'll blow just keep doing that and it's a lot easier than what I just watched you do
A very useful video. Thanks! Like most Dyson equipment, the concepts are brilliant, and they work very well - but the engineering is so horribly over-complicated it becomes obvious why they are so expensive! Sadly, useful service information is also almost non-existent, and after-sales help is generally very poor :(
@OpenMeUpTec
2 жыл бұрын
there is a misunderstading. first service is unnescessary. without doing the stuff in the video your dyson will work like normal. it is just something you do to clean but does not improve performance.second if something goes wrong dyson will replace the item for you without you needing to return the faulty item. you might think this is bad until you tried other vacuum like bissel where you can even disassameble it to clean as they glue it together.
@hectorpascal
2 жыл бұрын
@@OpenMeUpTec "if something goes wrong dyson will replace the item for you without you needing to return the faulty item." not in my expereience, after the gurantee period has expired! My meaning was that, just like Apple, if you want to repair a unit yourself, there is no "official" information available.
@OpenMeUpTec
2 жыл бұрын
@@hectorpascal thats correct. if it still has warranty. without it you have to buy the replacement part from them
@chrisvig123
2 жыл бұрын
Very poor serviceability with these units
@OpenMeUpTec
2 жыл бұрын
@@chrisvig123 you dont need to service it. dyson tells you that if doesnt affect the unit. i cana tell you there is bsically no difference doing this or not.
Very well explained! really useful, thankyou👍
@OpenMeUpTec
2 жыл бұрын
thanks for your support
Every time I place red gasket with grey ring together I make sure it’s lined up so when I place back together with bin gasket they just slide off into the clear bin. I make sure they snap and are aligned, but nothing is working.! Help!
@OpenMeUpTec
6 ай бұрын
watch my newer video it has more steps and explains a few things. you mght have stuffed up or broken the clips
Hi thank you. Amazing video. I have a problem, when I use my vacuum cleaner it malfunctions. I have followed everything you have done and also cleaned the broom. filter has also been washed. the vacuum cleaner malfunctions. the sink lamp keeps coming on. the engine lives its own life. Please help
@OpenMeUpTec
3 жыл бұрын
can you look for a picture of the sink lamp so i can understand what the issue is. does it work at all if so how long?
Hi, followed all the steps and managed to assemble everything back except now the mode button on the LCD screen on the rear doesn’t change the mode anymore. It was working fine before this, any recommendations on what I can check or which cables to check if there is voltage? Thanks, hope to get it working again
@OpenMeUpTec
Жыл бұрын
at 4140 in the video did you put the wire back correctly
the circular rings are ferrite beads. they filter the power going into the connector
@OpenMeUpTec
2 жыл бұрын
thanks for the information
Thank you. Save me a lot of doller
Ther is the silicone skirt/gasket that is above the silver motor part attached to the gray plastic part which looks deformed as it is on my vacume. You didn't mention it. Is it removable? can it be replaced? You can see it at 38:25 right below you right hand.
@OpenMeUpTec
Жыл бұрын
you can remove that. please watch my newer video on my channel which i show that part
Awesome video, thanks. Where can I get a replacement grey ring that sits over red ring? The one I have is cracked and when I dump the dirt, it comes off
@OpenMeUpTec
Жыл бұрын
just glue it together
The 2 videos you are referring to, please link them in the description. :)
@OpenMeUpTec
Жыл бұрын
i have a newer cersion of this video on my channel . watch the newer version it has more steps and instructions
Awesome instructions 👏👏👏 MANY 🙏🙏🙏🙏
Great video & explanation ..... Thanks :-)
Hello and thanks for your video :) You know if V10 bin is compatible with V11? Normal size, not big bin.I broke mine, and the bin for V11 is out of stock, but V10 is available.
@OpenMeUpTec
4 ай бұрын
they change the ends. if you watch my newer videos it will explain and show you it. basically the bins will not fit. you will need to do 5:30 in the video to switch the old and new one over before you can use it
The rings the cables are wrapped around are to disrupt magnetic fields or noise
@OpenMeUpTec
2 жыл бұрын
thanks for letting me know
Fantastic video and thanks so much. How can I buy you a coffee?
@OpenMeUpTec
Жыл бұрын
it is unnecessary, i dont want you to send me money. if you really want to pay in someway, you can click on a few ads in my video
You're the best, thank you!
@OpenMeUpTec
2 жыл бұрын
thanks for your support
Thanks for the video! I reassembled and I have 3 long screws that I have no idea where they go. I can see them in your video up against the far side of the box. Can you help me out?
@OpenMeUpTec
2 жыл бұрын
battery screws? can you watch the video and tell me at what time i can see the screws
The red rubbery ring inside keeps popping out with the plastic piece everytime I put it back together , what do I do ?
@OpenMeUpTec
5 ай бұрын
you need to watch the new version of the video it tells you what you are doing wrong 10:40 in the below video kzread.info/dash/bejne/oGaDktyHc7WxiJc.html
Good video thanks - I need to take the V10 apart. I was wondering if I could design a tool (instead of the chopsticks) to knock out the plug - seems it must be long enough to reach the plug and the right shape to push it out??
@OpenMeUpTec
2 жыл бұрын
if you checkout my channel i show you 2 methods to remove the plug. the chopstick method which is quick and easy. The shim method which is safer but require more effort.
What if battery works and charges but the Dyson will not turn on? 3 blue solid lights when trigger is pressed but motor doesn't engage? Is there a hard reset I csn do? Thank you!
@OpenMeUpTec
Жыл бұрын
the motor might be dead. you have to open it up to confirm. i have a newer version of this video on my channel which shows you
What kind of screw driver to open the screws ? Phillips or flat head ?
@OpenMeUpTec
Жыл бұрын
please watch my newer video on my channel where i provide you the info
possible that there is no tutorial for the v11 with snap battery ?? unfortunately some steps are different ...
@OpenMeUpTec
Жыл бұрын
there is no v11 with a snap battery you must have the v15 which is in my other video
Very usefull thank you. How are those blue triangles you use called please ? Thanks again. ☺️
@OpenMeUpTec
2 жыл бұрын
they are just prying tools. i dont know what it is called but you can find them on ebay or just buy guitar pick
Rather than take the plug out just snip the wires and add some in line crimps when you reassemble. Much easier and makes disassembly next time even easier.
@OpenMeUpTec
3 жыл бұрын
i did this in my older version of the the video which is on my channel and many pople didnt like it. it is harder to do and requires knowledge and skills that many poeple dont have. it is also scarier since it is cutting the cable .
My Dyson brush bar spins ONLY on high speed. It doesn't matter if I have the small or little brush bar attached...they only spin in the most powerful setting. Trying to run on the two lower setting results in the motor pulsing with no suction and no brush bar spinning. Any help??
@OpenMeUpTec
Жыл бұрын
the bruch bar only has one setting. only the torque head has different speeds. if it is pulsing then you have a blockage somewhere. please note if your filter is old and has been clean correctly it can cuase the pulse
@cccc9911
Жыл бұрын
@@OpenMeUpTec THank you so much for the quick reply. Subscribed! Do you mean that the blockage is serious enough to cause the pulsing on the first two speeds, but not clogged enough to stop it from running perfectly on boost mode? I shouldnt even mention brush bars. It just pulses in lower two speeds with no suction...runs perfect in Boost mode...lots of suction and bars work.
@OpenMeUpTec
Жыл бұрын
@@cccc9911 first 2 speed are weaker thats why it cant not push the air through.
Hiyer! Excellent video! My V10 has the broken trigger issue. Stripped down ok until I got to removing the trigger assembly from the handle. Refuses to come out! The fixing screw just goes round, seems like the assembly is glued in? Your advice please?
@OpenMeUpTec
2 жыл бұрын
please watch my video on the v11 where i show you how to remove it.
@richardwilliams3986
2 жыл бұрын
I’ve watched that part many times :)). But it still won’t move, used plenty of force, it doesn’t even move a fraction …
@OpenMeUpTec
2 жыл бұрын
@@richardwilliams3986 are you sure you done the right thing. watch the below video at @39.30 onwards kzread.info/dash/bejne/qHZspNJwm7rQZcY.html
@richardwilliams3986
2 жыл бұрын
Thank you for your replies. Still no luck. The screw (deep in the handle) was very tight to undo which led me to the glue suspicion. It turns ok now but doesn’t tighten either. Does it just screw into plastic or is there some sort of lock in there? Anyway, if I put any more force to extract the assembly something is going to break so I’m going to plan B. Forget the trigger repair, reassemble and join the small red and black wires that go to the little connector on the PCB. I’ll turn the motor on and off by taking the filter on and off. Regards Richard.
we have some bits of stuff falling into the dust collector with each use, that look like little fragments of some kind of black plastic screen... but I don't see any part in your video that looks like a fine black plastic screen... and it seems to make filter light blink, even when the filter is clean... what could this be...??
@OpenMeUpTec
4 ай бұрын
dust builds up over time and looks like pieces of plastic. rub it with your hand and see if it disappears. you confirm your filter is clean if you lift it up to the light and it should be white. if it looks gray or dark like a shadow it is not clean
@PRH123
4 ай бұрын
@@OpenMeUpTec the filter seems to be entirely clean... when i look inside the part of the motor housing that sticks up into the filter, behind all the little holes it looks there is a fine black plastic screen... is there one in there..? is it a problem if it starts to break down...? it seems that in this place the air is flowing out from the motor housing through the holes and into the purple filter... so the little bits wouldn't be going into the motor, I guess....
@PRH123
4 ай бұрын
@@OpenMeUpTec i watched another video just now from Beko1987, why dysons kill themselves #74, and he disassembles the motor, and there is some kind of like sponge that he pulls out of the housing from behind the motor... could that be it...? what is the purpose of that sponge...? does it break down over time...? thanks...!
@OpenMeUpTec
4 ай бұрын
@@PRH123 the sponge is a filter they all have it. i doubt it is that.
@PRH123
4 ай бұрын
@@OpenMeUpTec hi, I was googling around and found some pictures with the identical little bits of plastic ending up in the purple filter... they look like little tiny black plastic dogbones... and they say the sponge is for sound reduction...! I suppose that makes sense, a filter that is completely inaccessible for cleaning or replacement would be strange... although just shoving a sponge into a tube for sound reduction is pretty poor engineering also...! Why couldn't they just make the top of the tube with a lid to get at the sponge, instead of having to disassemble literally the entire vacuum and motor just to get access to it... :( ** So, in either case, I suppose that we could just put up with the sponge slowly degrading, if it doesn't actually affect operation of the vacuum...? Thanks...!
Thanks for the guide! I'm trying to fix my broken trigger but I pulled out the small sensor cable off the pcb and broke the base connector. Will this affect the trigger? It doesn't look like it connects to anything on the pcb?
@OpenMeUpTec
2 жыл бұрын
can you please watch the video and tell me at what time i can see the part you broke
@limung8877
2 жыл бұрын
@@OpenMeUpTec 42:10
@OpenMeUpTec
2 жыл бұрын
@@limung8877 that connector is the on off switch. if you dont connect that you cant use your vacuum
@limung8877
2 жыл бұрын
@@OpenMeUpTec ended up buying a solder iron to solder the wires to the pcb lol
@OpenMeUpTec
2 жыл бұрын
@@limung8877 you can watch the never video on my channel and you dont have to cut the wires
Hi. Came across your channel while trying to troubleshoot my vacuum cleaner. After removing and cleaning the filter, my vacuum now is pulsating. I have checked all the places like in the video from Dyson on how to check/clear blockages but it’s still pulsating. Any idea what else I can do? Thanks!
@OpenMeUpTec
2 жыл бұрын
follow the video to 10.55. after that put your batter and filter back on it should work properly now. if so then you have a blockage in the cyclone
hi can you help ive took a part my dyson 11 because my power button is not wotking it does not come in and out how do i fix it please
@OpenMeUpTec
Жыл бұрын
i have a newer version of this video on my channel . in that video i teach you how to remove the trigger
Well good thanks
Watching again! Thanks 👍🏻
@OpenMeUpTec
3 жыл бұрын
thanks for your support. remember there is another 2 videos just about removing the connector.
Hi this is so valuable! Could you please share your toolset? Thanks
@OpenMeUpTec
Жыл бұрын
i purchased it on ebay. look for something like 35 in 1 which cost around $15AUD
Thanks!!
From where can I purchase the plastic strip that keeps the bin from sliding out please? My bin keeps sliding out because the small piece of plastic that holds the bin from sliding out is broken as shown in the video. Thanks. J
@OpenMeUpTec
3 жыл бұрын
i purchase mines on ebay but otherwise there is no where else you can buy them from
Where can i get those picks that you used to take apart the top of the canister? Great video!
@OpenMeUpTec
Жыл бұрын
i got them off ebay with i purchase prying tools
Thanks
Thanks men👍👍👍
Just do it during the warranty , if the machine for any reason will be damaged due to this, the warranty will be voided
tres bonne video .. Merci ...🙏👏
Thanks perfect 👍🏻
you can buy replacement slide piece from amazon i bought one myself
@OpenMeUpTec
3 жыл бұрын
thanks for letting me know. i purchase minds second hand from ebay and it was $20AUD each plus $10AUD postage
@scottadamson1109
3 жыл бұрын
i am in Australia cost about $39.95 au dollars delivered
thanks. no other brand has the same cyclones as the dyson, I guess they can't copy it completely
Thank you so much for ur vid. Very informative. One question though. Can v10 & v11’s bin be swapped? (Meaning use v10’s on v11 and use v11’s on v10?) and can their batteries be swapped as well? I see they are both 25.2v and designed exactly the same but v11 has bit more capacity. Please please let me knw
@OpenMeUpTec
2 жыл бұрын
the batteries can not be swapped. the bins are the same
@silent6701
2 жыл бұрын
@@OpenMeUpTec thanks for answering. Oh.. the batteries looked exactly the same and had same voltage. Does it not function at all when they are exchanged?
@OpenMeUpTec
2 жыл бұрын
@@silent6701 it doesnt fit in the hole and it is not the same size. 11 is better and than 10
@silent6701
2 жыл бұрын
@@OpenMeUpTec ohh thank you somuch for ur help. It really helped ☺️
@natew.5511
Жыл бұрын
Correct, the batteries are completely different between the two.
can you reply to my question on the asus rog gr8 ii dissembely please,
At 27:16 where exactly do you place the screwdriver? I cant get that part off :(
@OpenMeUpTec
Жыл бұрын
at 27:21 it shows you the part that pops up. thats where you need it to go so you can pry it up
Dyson me up 😩
The red clip on the dust collector doesn’t come down far Enough for me to click it to remove it!! Any ideas!
@OpenMeUpTec
3 жыл бұрын
the one at 2.00 in the video or ?
@XxxJaneXxx
3 жыл бұрын
@@OpenMeUpTec yes it is,the slider works to empty it But the other red bit inside to release the canister Doesn’t come down far enough for me to click it So it comes off the actual hoover. My filter light keeps coming on ,I’ve cleaned it But during hoovering it comes on again.
@OpenMeUpTec
3 жыл бұрын
@@XxxJaneXxx i am confused can you take a picture and show me. just upload it somewhere and send me the link
Can u please share the template of the “plastic tool” to me? Many thanks!
@OpenMeUpTec
2 жыл бұрын
if you watch my newer on the dyson v15 you might not need it
Is it possible to disassemble the motor itself?
@OpenMeUpTec
2 жыл бұрын
you can but i have not shown it and will not be providing a demonstration. there is also no purpose of removing it unless you want to clean the form peice inside
GRACIAS PERFECTO
I’m trying to upgrade my graphics card on my hp all in one model 24 computer so I can’t link my oculus without it messing up but idk
@4kBrii
3 жыл бұрын
I have the AMD Radeon(TM) Vega 8 graphics and it’s not supported with oculus link
@OpenMeUpTec
3 жыл бұрын
you are in the wrong video but it is not going to work. the HP AIO is too weak
@4kBrii
3 жыл бұрын
@@OpenMeUpTec thank you I just bought virtual desktop and it works way better all I need to do is connect my router to my computer
I cannot find ANYWHERE how to take apart the LOOP of the am09 dyson hot+cool. I know how to disassemble the base, core and remove the loop but to tear apart the loop itself I have not found anything. Please help me
@OpenMeUpTec
2 жыл бұрын
sorry i dont have one to provide you assistance
Can you post the original video here and give credit to him?
@OpenMeUpTec
Жыл бұрын
i dont undestand you. what is the issue
Amazing video! Do you mind telling me what screwdriver (size) you are using to remove the red ring? (min 5:16) Thank you
@OpenMeUpTec
3 жыл бұрын
torx t8
Hi, can you please give me the reference (size) of the screwdriver you're using to remove the display/handle part, the long one in black and yellow. Thx
@OpenMeUpTec
3 жыл бұрын
it is nothing special. it is just a normal phillips head screw driver. i dont have the specs. but you shoul be able to find it anywhere. it just has to be long thats all. i purchase a set of them for $20AUD
just did it and mine is blowning stoping blowing stoping
@OpenMeUpTec
9 ай бұрын
blowing and stopping means there is an issue with the air flow. did you clean the filter properly or let it dry
@ninoblaze4347
9 ай бұрын
i cleaned it but i also feel it comes from there , when it run i see the filter growing and pumping and it heats a lot maybe i should try to clean it again @@OpenMeUpTec