OnePlus 7T Screen Replacement (Fix Your Broken Display!)

Ғылым және технология

Today I am going to show you how to change the screen on the OnePlus 7T. You can fix it with the frame as well, but this is just for the OLED.
Required tools-
PH000
Metal Razor Blade
Plastic Pick
Playing Card
Some Heat
Patience.
Check out the RWR Discord! - / discord
Support the channel via Patreon! - / realworldreview
Toolkit that I recommend and reviewed (affiliate link) - amzn.to/2EqCvvv
Toolkit that is closest to the one I use for all my repairs (affiliate link) - amzn.to/2H4duIr
**Part can be found here (affiliate link) **
Screen Only - amzn.to/3kCOFW9
The glue that I recommend using (I use the T7000 at 50ml, but B7000/E6000 work as well) (affiliate link) - amzn.to/2GY2cVL
Double sided adhesive I recommend (affiliate link) - amzn.to/2U2eQqv
Clamps I recommend with the glue (affiliate link) - amzn.to/2T8opHn
Dual Temperature Heating "Thing" (Heat “Gum”) (affiliate link) - amzn.to/3hzTUUs
The best type of razor blades (buy 100+ cause they’re low cost and fragile[don’t pry with these!!!]) (affiliate link) - amzn.to/2YE4W17
Playing Cards for easy adhesive cutting (affiliate link) - amzn.to/2JTBJf6
What else should I teardown or fix? Want more OnePlus videos? Let me know on here or on Twitter / mattofrwr .

Пікірлер: 34

  • @HaemonAK
    @HaemonAK2 жыл бұрын

    Great video! Swapped the screen out for a friend. The only thing I'm a bit worried about is it felt like I couldn't get the screen to sit all the way flush inside the frame. Hopefully when the glue dries all is well. Used E6000 as I didn't have any B7000 or T7000. Will know tomorrow if it turned out alright. Ohhh, side note. Tea tree oil works great for breaking down the old adhesive on the glass back. Just make sure you use rubbing alcohol to clean up the tea tree oil afterwards.

  • @Galadrew
    @Galadrew2 жыл бұрын

    Thank you for posting this. I just needed the link to purchase screen, which you were thoughtful enough to provide.

  • @Gusbusbus
    @Gusbusbus2 жыл бұрын

    I'm going to attempt this soon, thank you

  • @marcellegourley3697
    @marcellegourley36972 жыл бұрын

    Where can i get a screen ? Thanks for the video . Great . Easy . Simple . You Rock . Peace Always , M ~

  • @Indoreaction007
    @Indoreaction0072 жыл бұрын

    Sir if I Chang my 7T panal in this case can I use fingerprint sensor on new screen panal?

  • @derekhatake
    @derekhatake2 жыл бұрын

    what type of glue did you use?

  • @octofant_hosting
    @octofant_hosting9 ай бұрын

    So why did you not put glue above the front camera at 3:59?

  • @kt3030
    @kt3030 Жыл бұрын

    After replacement fingerprint work on 60hz and 90hz ???

  • @khalilsk816
    @khalilsk816 Жыл бұрын

    Good 👍 job

  • @arjuna.p2084
    @arjuna.p20842 жыл бұрын

    My fingerprint sensor is not working after this. Will it be any issue of the motherboard?

  • @mdashegde123
    @mdashegde12310 ай бұрын

    Is that the original display you newly added?

  • @TjRains
    @TjRains4 ай бұрын

    Is the glue supposed to fill that gap between the frame and the new screen?

  • @J3EB
    @J3EBКүн бұрын

    How can I know if the battery is original or not? I replaced the screen and when I received the device, I noticed that the battery charge ended quickly, and I started to susk that he had replaced it.

  • @aman__jaswal
    @aman__jaswal2 ай бұрын

    Sir I Want To Change My Display Please Help Me

  • @P105Mews
    @P105Mews2 жыл бұрын

    Hi, i gave this phone to a technician to repair the screen and he mentioned that the fingerprint reader will not work after he replaced the screen. is this normal?

  • @RealWorldReview

    @RealWorldReview

    2 жыл бұрын

    Yes. It is annoying but true. Apparently a calibration product exist, but I cannot find one

  • @P105Mews

    @P105Mews

    2 жыл бұрын

    @@RealWorldReview ah okay. Thank you for your response. I've picked up my phone. Just happy to have it up and running once again

  • @JamieR1988

    @JamieR1988

    2 жыл бұрын

    @@P105Mews Yeah it's something to do with how the security works on android. Oneplus have even reached out to Google to fix the issue

  • @shanegrissett7423

    @shanegrissett7423

    Жыл бұрын

    @@RealWorldReview check out mobile defender, it has a cube flesh colored calibration tool. I'm not sure if it works but it claims to be OEM

  • @RealWorldReview

    @RealWorldReview

    Жыл бұрын

    I have that now. Never does anything for my repairs

  • @MLeamSi
    @MLeamSi Жыл бұрын

    i just drop it my oneplus 7t and it's not working ,even on charge nothing , so how to know if it's screen fault or battery ? the screen is little bit cracked but the crack looks inside you can feeel them by touch ....thanks in advance

  • @meerabraza5549

    @meerabraza5549

    11 ай бұрын

    Bro same so what happened to your mobile after dropping ?

  • @MLeamSi

    @MLeamSi

    11 ай бұрын

    @@meerabraza5549 I bring to a repair store and they found out the motherboard not working, it's like it burned from inside, the drop caused some short circuit....and the screen too... So I just forget about it as it will cost a lot....

  • @MLeamSi

    @MLeamSi

    11 ай бұрын

    But for my case , the phone when dropped it become very hot instantly.... I though I was the battery at first....

  • @apostleoverseerchristie5524
    @apostleoverseerchristie5524 Жыл бұрын

    My display cable is broken

  • @stuffcool6436
    @stuffcool6436 Жыл бұрын

    Sir My OnePlus 7t is dropped by my child and gone off I want to repair it Plz guide me

  • @iiCatbell

    @iiCatbell

    Жыл бұрын

    this video is exactly for that guide yourself??

  • @JamieR1988
    @JamieR19882 жыл бұрын

    I got my 7T for £280 and now I have to fork out £170 just for a screen replacement. It's an absolute joke. Also, they seriously need to start making it easier to extract data (photos /videos) from phones with damaged screens. I have about 8,000 photos of my kids that I'll probably never get back now!!

  • @HaemonAK

    @HaemonAK

    2 жыл бұрын

    That is if you buy and official screen. I bought a good quality one for $74 USD off of ebay. The issue with getting photos off of phones without actual access is a security thing. You can infact give yourself a backdoor so to speak into your android device by enabling ADB (android debug bridge) which allows you to send all sorts of commands to the device and access it even if locked over USB. The issue of course is if you lost your phone and someone else picked it up and knew to check, they could access it too. Any sort of backdoor option they add from factory, is a potential exploit waiting to happen.

  • @RealWorldReview

    @RealWorldReview

    2 жыл бұрын

    I would rather allow that than never access my info lol.

  • @TombombSilver

    @TombombSilver

    2 жыл бұрын

    @@HaemonAK do you have a link to the one on eBay?

  • @HaemonAK

    @HaemonAK

    2 жыл бұрын

    @@TombombSilver I tried linking it, but it wouldn't post on KZread. I'm sure it's flagged as an advertisement, ect

  • @aaronmatos5581
    @aaronmatos55817 ай бұрын

    I think that is important for you to mention the consequences of using other types of glues and talk about how delicate the process needs to be and how easy the screen can be broken if is not being put properly. Also, you can mention the type of mistakes that will put your phone to risk. I will give the video 3/10. The importance is the security overall.

  • @RealWorldReview

    @RealWorldReview

    7 ай бұрын

    Strange conclusion to come to in regards to a screen that broke with the factory adhesive.

Келесі