Once you know this secret, you'll never throw away a used CD again! Tips and tricks
Shrink tubing is cheap and much easier than melting a bottle cap. The CD trick is just downright dangerous.
Where safety glasses, and let Darwin do his job!
Very true and scary
Wear , Darwin.
I remember Mythbusters spin testing CDs.
The CD Hack is the dumbest most dangerous thing you could possibly do.
I have been working with a grinder for 40 yrs,never do this with a grinder,utterly dangerous😮
Anyone wishing to try this.PLEASE film your self doing this and get some to upload it to KZread. I say this because you will no longer have any fingers to do it for yourself. Man even removed the guard!!!!!!! Fantastic work!
That brittle plastic will fly apart in all directions and could do horrible damage.
" ...you'll never throw away a used CD again!" Yeah, because you'll be blind and unable to find the wastebasket.
Or more likely dead
What a stupid thing to do with that CD considering that it would probably disintegrate and blind anyone in the area. Post like this are extremely dangerous.
And even if you can find a CD blindly, you won't be picking it up because of the whole "lack of fingers" thing.
Here’s a ‘Life Hack’ for you: While in the hardware shop buying hot melt glue, solder and sandpaper, just buy some cable clips, shelf brackets and ( please, for the love of God) PROPER angle grinder discs!
ПХАХААХ как же я с тобой согласен))
And some protective gear
Man, that CD trick is just shrapnel waiting to happen...
У меня кот, когда делать нехрен, то находит более интереснее занятие. И чистота и в доме светло.
подметает и окна моет?
Que maravilha, aprendi muita coisa
Just how expensive ARE sanding discs for your angle grinder??? Worth your life???
The CD on a grinder is dangerous! The rest are laughable 🤣
Grinder speeds are far too fast to do stuff like this ,, dangerous !
Putting something like this on a tool that generates 10k rpms is suicidal!
¡Un CD viejo en una máquina de 11.000 rpm sin carcasa protectora, la mejor forma de acabar en el hospital 😱
The cable winding thing was great, a figurative rose amongst thorns, really. The plastic wire covering idea was fine, for LOW voltage applications.
They’re better at keeping birds away from your garden than a sanding disc
I’d be careful using the sander with the CD.
"Careful" is an understatement. ABSOLUTELY NEVER do this unless you want to enjoy a nice vacation in the ER and not be able to see for the rest of your life. I guess eyesight is overrated by the poster? That is one of the top five most dangerous things I've seen on KZread in my life.
As shrink tubing i use electrical tape, then heat it up with a lighter, works great. CD was a good one too.
Was it really necessary to drill the pilot hole through the spring clip?
It makes no sense
And when the CD catches on something and explodes, you will spend the next 2 week pulling shrapnel out of your body.
Or a miserable eternity regretting the loss of your vision .. ... ..
Agree with most of the points against on here but the broken key trick was good and useful if it works.
Once again, tips straight out of and for the trash can! Before the thing with the CD must be warned urgently. It would be good if at least the people who publish such videos first turn on their brains!
A grinder is not a toy!!!whoever handles that grinder or those who stand nearby5-10 meters can seriously get injured!!!
The CD trick is dangerous if you do it that way, I recommend you do it another way or add extra protection to avoid cd debris.
I recommend you buy a proper sanding disc.
Kevlar with steel plates✅ Safety glasses ✅ Face shield ✅ Safety glass ✅ I'm ready!
Que locura lo del CD para lijar. Super peligroso
The paper clip idea to secure a cord was the only one I would even think of using.
Getting the broken key out the lock was good but that CD will explode like a grenade.
445 - Uh no, that is a bomb in your hands, specially without the shield. If that cd comes apart it is pure shrapnel that will fuck you up badly. I can't say it any more gently. Viewers, please don't copy this. Buy the right sanding disks instead.
That is no joke. CD's were not designed for those RPM's and side pressure. JUST DON"T DO IT! but send pictures of the emergency room and your wound (s) if you do!
not to mention the scissors are now stuffed
A friend´s jaw was smashed to pieces by an exploding specified grinding wheel.
I've had a normal purpose made grinder disc come apart , use this and book youself into A and E !
Ide yg sangat kreatif Bosque 👍
If I repeated what was shown on the thumbnail, the disc would explode, shrapnel, and impale me with fragments!
Awesome hacks! This is a must save channel for the DIY fix it crowd.
That last one with a CD on a grinder is a ride to the ER waiting to happen.
Once you know the secret of the CD you are no longer able to tell someone else, plain dangerous.
I did that with the CDs - and I died.
Ni dos dedos de frente tiene este hombre al hacer eso con el CD.
And with the money you saved on a $1 sanding disc....you can put that towards buying a new pair of scissors or a sharpening stone..well done 👍🏻
Regarding the CD hack. Maybe it’s time for KZread to step in and suppress videos that recommend unsafe use of power tools. Lots of abuses for angle grinders and table saws on YT.
I don't see much bad information on KZread regarding table saws. But angle grinders! People seem to think an angle grinder in an all-purpose electric motor with a built-in handle.
Using a CD for ANYTHING on an angle grinder is Darwin Approved and will most likely end up with you in the ER or blinded from shards when it shatters.
I love the irony, when he cuts out the sandpaper disc, it says on the sheet "English Abrasives. Made in China"!
The stupid things people will do to save 38 Cents 🤣
Seems like A LOT of extra work when you can just get proper sander disc's! It's not like they're hard to get 🙄
If you put a CD on a angle Grinder expect the CD to blow apart because of the very high RPM's and yes those pieces will stick into your eyes, face, hands, penis, stomach, and wherever else those pieces hit. Grinding wheels made specifically for Angle Grinders fail and explode from the high RPM's and have caused horrible injuries. I did a little research to see how fast an angle Grinder spins 6,000 to 8,000 RPM's Dewalt has 1 that reaches 11,000 RPM'S. Then I looked up what a CD spins at the max I seen was 500 RPM's so the slowest angle Grinder will spin a CD over 10 times faster than it should be. PLEASE DON'T TRY THIS "trick" because it could kill you or someone else
Посмотрел видео и пошёл выкинул коробку с дисками😂
You can buy connectors for nine volt batteries. That is pointless and probably cost more than just buying a clip. OMG you can buy cable clips and heat shrink tubing. The stuff is cheap. The broken key one is good, the rest of it is a ridiculous waste of time. The CD could be dangerous if it shatters. They tend to throw shards.
How do people here all seem to know what happens to an exploding CD. What have you all been doing with them?
The CD idea is an interesting one as there's no center core to pop out like sanding and cutting discs do. I still listen to my CDs and watch DVDs but I have some that don't hardly work anymore so I'll try on one of those. I would only use it for light duty sanding.
Frankly, I wouldn´t use anything as flimsy as a CD sandwiched between sandpaper for sanding. I doubt that this disc withstands those centrifugal forces.
Please do not try the CD trick! Angle grinders are very powerful machines that spin crazy fast. CDs are not meant to take that sort of abuse even when you're not putting additional stress on it by pushing it onto whatever you're trying to sand. If it fails, you're looking at some very nasty injuries!
Mythbusters tested that back in their 1st season. If you get a CD to spin fast enough, it will shatter. An angle grinder is more than capable of reaching that speed.
CDs are supposed to rotate at 500 RPM, not 10000!
Angle grinders spin at about 10,000 RPM. The chance of a CD or DVD shattering in an angle grinder is virtually 100%. When that happens, the chance of you getting hit with very sharp shrapnel at nearly 10,000 RPM is almost 100%. Don't try it.
For the CD trick I could use my Ice T CD: Raining Blood
A CD is designed to spin at 500 rpm. That grinder most likely spins at well over 10,000 rpm. Someone is going to spend some time in the Emergency room getting stitches!
Где-то всплакнул доктор Дью😂
These videos are great, love the cd hack
That trick is extremely dangerous.
NO! Just read a handful of the comments like @XenahWP 's.
Read the comments, now.
Some hacks make sense. Others not so much.
наждачка с диска сотрется за 2 секунды. у болгарки 6000 оборотов
That is a metric ton of Pain in the butt, for something I can buy a 50 pack at Lowes for the price of that CD.
I would really hate tone standing there when that cd comes apart at high rpm
........Also, never use a grinder without the guard
Most of the tips for cable use would never pass an electricians test. The CD disk is dangerous, should the disk crank and splinter you will have bits in your eyes. I note that this guy didn’t ware eye protection or gloves when using an angle grinder.
You can use the grinder to sharpen the scissors you just ruined!
This video convinced me to subscribe!
Bruh, never drill anything in your hand. Cutting towards your fingers and making a sanding disk that can fly apart and not using guard to protect you somewhat from disc. Good ideas though, just need to go about it safer.
Автор, научись ускорять видео в таких моментах, как, например, отрезаешь круг или тому подобные действия.
A CD is designed to spin at 200 or so rpm. If you slap some sandpaper and superglue on it, a cd will hold together for 12,000 rpm? I love watching these "genius hack" videos so I can understand how the former Soviet Union stripped so much from the Warsaw Pact countries and left them with nothing so these resourceful people had to fill their lives with unnecessary danger to survive. I realize these specific "hacks" originated from Saudi Arabia, and yes, I believe there are similar regimes in place.
Yeh... You know, when you have maybe 1% of good DIY ideas, don't do a whole video about multiple ones...
CD on a grinder can be deadly. Don't do it!!!!!
Bad idea with a plastic cd on a high speed angle grinder!
Suicide, especially without the guard!!!!😱
trucos totalmente inútiles, algunos incluso son más caros que la solución normal como el de las grapas para el cable, pero el peor es el de la miniatura del video, los CD's están diseñados o destinados para girar a unas 4000 RPM MAXIMO de manera segura, y eso en condiciones de uso normal que no implican recibir presiones y esfuerzos externos, solo girando...... ahora imaginen ponerlos a girar a 11.000 RPM que es lo normal para ese tipo de pulidoras y adicionalmente recibiendo presión contra lo que estás lijando, RECETA SEGURA PARA EL DESASTRE, si hasta los discos para pulidora se pueden romper, imagínate lo que puede sucederle a un CD, como para denunciar este vdeo por Actividades dañinas o peligrosas
Y lo peor es que habrá gente que no caiga en ese "detallito" y acabe muy mal parada. Ya he leído varios comentarios por ahí diciendo que es una idea genial...
А вы знаете как круто разлетаются диски в высокоскоростном приводе компьютера. Болгарка без защитного кожуха, диск и вы запросто можете остаться калекой.
Just because you can, doesn't mean you should. The CD hack is an Emergency Room visit waiting to happen, assuming you don't die before you get there.
Why melt a bottle lid to insulate the wire? You could do exactly the same thing, only easier, using the hot glue that you used in the next hack. Dismantling a battery - dangerous. The hack with the CD - dangerous. I can imagine this guy winning next years Darwin Awards. The few hacks that look safe and useful could easily be done just as well, and maybe as cost effectively, by just being something designed to do the job.
This video should have a health warning
Buenisimo!No hay ningún desperdicio.
What could possibly go wrong holding a glue stick with your hand while you drill into it? 🤦🤦🤪😜
Once the Stanley knife and glue guns come out im done!!
узнав этот секрет вы больше никогда не будете смотреть эту хрень
I'll try the CD one next time I think I have too many eyes in my head
Dangerous use of a CD! Somebody is going to the hospital!
Some people have waaaaay too much time on their hands.
I just buy a grinding disc, quite cheap
if you lucky you will survive
Imagine if a CD could safely spin at 10,000 rpm.... The film would be over in less than 2 secs. 🤣🤣🤣
The glue stick and the broken key inside the lock maybe
Dangerous. Don’t do it.
Macht bloß das mit der CD nicht nach, wenn es die zerreißt, kann man schwere Verletzungen davontragen
I haven't had a CD in at least 15 years
As a welder I will tell you that the CD thing is bad news! First off the disc is spinning faster then it should and when ANY pressure is put on it the disc will become a grenade.
mal consejo la radial siempre con protecion el disco
Why are you trying to hurt your fingers by holding a paperclip while drilling the hole? Just drill a hole! You have to lift it up anyway, to blow the sawdust out of the way
Я и так не выбрасывал.
Здравия! Крутяк с обвесом
No...im pretty sure Ill throw away the disc and buy a proper grinding wheel....
How to get hurt and spend more time and money in a few tweeker steps
Wear safety glasses.
I can't hear the narration.
Never ever do anything as daft as put a cd on an angle grinder please
В видео не вошел момент, когда компашка разлетается на мелкие осколки и впивается в харю изобретателя
Good use of Beyonce cds.
If that CD spins that fast and flys apart god help the person that gets hit with that plastic... Everything in this video is dangerous and not worth the time tho proper clips for the wiring is probably cheeper...