Very clean new edge build, glad to see people are treating the 2v’s right.

@RatchetWrenches

2 жыл бұрын

Thanks! Yeah I take care of this thing the best I can

@2vcrew782

2 жыл бұрын

I own two now lol. My wife is getting worried. I drove 5 hours for a really nice garage kept one two weeks ago. Been driving it every day since lol

@Talevar

2 ай бұрын

@@2vcrew782 My dad keeps trying to talk me out of getting a GT after he convinced me to sell my V6 last year lol

4v here. Really enjoying seeing the New Edges finally getting the respect they deserve. Some roll up your sleeves kinda work is all it takes to make them a rocketship, most people arent that committed to modding a car unless they feel its worth it. Great for a hurt-your-feelings mobile in a world of scat packs and 10 speed coyotes.

@RatchetWrenches

Жыл бұрын

Couldn't agree more! Yeah this turbo has been game changer for the car. I plan on keeping this car and in good condition for as long as I'm alive!

@adamnevinsftw

Жыл бұрын

This!

@misterbulger

Жыл бұрын

My entire MO is to smoke fancy cars with < $10k all while turning more heads than the rich people can. This car can do all of that.

@FWDSUXARSE

Жыл бұрын

​@@misterbulger That's how I felt with my 03 GT and I continued to do that with my 98 Trans Am that replaced it. I'm not beholden to one company so I love both. Also owned a Toyota Supra and an MR2 so I'm not even just an American car guy. I just love cars.

@equinoxacidz2493

10 ай бұрын

@@misterbulgerexactly. Living in the inner city, I get kicked out of car groups and shunned for not having a mopar. I have a 94 gt with just cam, heads and bolt ons with an exhaust. I wanna find a wrecked 4.6 4v to throw it in a 94/95 or any sn95 within budget.

I’ve had my 2v N/a full bolt on cammed with stock bottom end parked forever… I always wanted do this cause it’s cheap! Thanks for the video! Motivated me to start messing with my new edge!

@RatchetWrenches

11 ай бұрын

There's always something to mess with on these cars! You're welcome!

Shiiiiiet nice vid, badass review! You covered any questions I would have had. Props to the cameraman!

@RatchetWrenches

Жыл бұрын

Awesome glad you enjoyed it! Haha yeah it was a hard one to film in the car with those accelerations too!

i have the on3 FF kit on my cobra for year now it’s amazing.. but upgraded the wastagate to a turbosmart 45 gate and graddy boost controller and did an mmr oil cooler relocation kit

@RatchetWrenches

2 жыл бұрын

That's smart to upgrade the wastegate and those other components. I'm sure that cobra is fast as hell with the turbo!

I had a supercharger on my 99 gt with a lot of other performance parts but the funny part is on the passenger dash is has srs for safety restraint system and I told people it stood for serious roadster and most people believed it

Car sounds insanely great, love it 🤘🏼

@RatchetWrenches

2 жыл бұрын

Aye appreciate it thank you!

Let’s get it! Your New Edge is looking great 👍🏽. I’m looking to buy a turbocharger soon, but I’m being patient. #teamnewedge🤘🏾

@RatchetWrenches

2 жыл бұрын

Thanks we appreciate it!! Do it! Such a game changer honestly

I'm so glad I bought a New Edge. The way mustang guys talked about it, I was shocked to learn that you can add a good chunk of power for relatively cheap. I plan to get an S550 or maybe an S650 depending on if costs ever come down but for now, I'm going to build up my New Edge to have fun. Great video

@midnight347

3 ай бұрын

It's coyote guys mainly that shit on anything that isn't a coyote. For the money a 2v can be made competitive in today's world without fully building the entire car contrary to popular belief. There was alot of fast fords running around before the coyote existed

@midnight347

3 ай бұрын

If u wanna mod stay away from an s650. Don't matter what anyone days just stay away and thank me later.

Right on! I’ve been eyeing a on3 for my 94 Cobra, just haven’t done it yet.

@RatchetWrenches

2 жыл бұрын

When you're ready to order it contact our new sponsor Straight Line Solutions (link in description) and Cody will take care of you based on your goals and needs for your build!

Dude I love your Mustang lol. Something about this body style; it was the one I used to see when I was in high school so that’s probably why.

@RatchetWrenches

Жыл бұрын

Thank you! Yeah by far my favorite body style and it's so easy to mod

Nice mustang gt Nice to see someone with a 2v and happy with what they have I know it's turbo but for what it is it looks like it moves out pretty good 👍 good job and like always God bless 🙌

@RatchetWrenches

Жыл бұрын

Thank you! Yeah, I love the 2v's, especially with the turbo it's a blast to drive

Beautiful car,I have something very similar on down to the wheels and tires,but dark green.N/A she is.Nice channel and good info.And a shout out to ya for that burn out.....I guess you gotta give em what they want......

@RatchetWrenches

Жыл бұрын

I love a good dark green stang! Thank you very much! And we absolutely had to let those back tires loose

thank you for the installation tutorial! Subbed

@RatchetWrenches

2 жыл бұрын

Anytime! Thanks for the sub 👍🏼

Just got one! Cant wait to start putting money into this thing. It’s my second car ever lol

@RatchetWrenches

7 ай бұрын

Congrats! Feel free to check out some of our okay videos. We did a lot to this car before we went turbo

They love boost. Got a Vortech on mine. Street tires are easy to burn, drag radials help go and big brakes for some woo

@RatchetWrenches

2 жыл бұрын

They really do love boost! And oh yeah they are I light em up every time in 2nd gear

Very cool! I have an 01 Bullitt with a blower on it. Just hit 41,000 miles. Stock bottom end. 389 to the ground 420lbs. So around 440hp flywheel. You are definitely at the top of the threshold with stock internals. But sweet ride!

@RatchetWrenches

Жыл бұрын

Your car sounds sweet too! Yeah it lasted about 7 months and then cracked the piston ringland in Cylinder 3. Fully rebuilt now about to be started real soon

@taylorray3168

Жыл бұрын

@@RatchetWrenches Glad you are fixing it up though. I had seriously contemplated putting a On3 on my 97 cobra I just sold. It looks like every is happy with them.

@midnight347

3 ай бұрын

Turbo is more efficient so you can run more power without seeing any more stress. You can get away with higher power levels with a turbo setup. Many people don't realize this. Your power level with a turbo would be like 430-450 rwhp stress wise because the turbo doesn't take power to make power so you're getting more power without seeing any more stress. That's what appropriately sized turbo will make more than a blower for each boost level.

I had an 01 and 03 GT the last 17 years. Wound up getting hit by a drunk driver in the 03 which totaled it. Took the insurance company payout and bought a 98 Trans Am to replace it. I'm really happy with the TA but when my rear end inevitably goes (junk 10 bolt), I'm getting an 8.8 out of a Mustang to replace it. Loved my Mustangs, also had a non PI motor 4.6 97 Thunderbird that I wound up swapping a PI intake manifold on when the factory intake manifold cracked. Had to do some modifications but otherwise it helped HP and torque along with a tune, a Cai, port and polished throttle body, some tokico shocks, cat back exhaust, and high flow cats. Mod motors sound amazing done right.

@FWDSUXARSE

Жыл бұрын

03 was full bolt on when I bought it but the stock LS1 when I first bought my car still seemed stronger. I've since done numerous modifications to the TA so the gap widened even more. But I still have a soft spot for the 2v 99-04 GT

Awesome build bro! Fairly torn between a pro charger kit and now this turbo kit! You should definitely do a pros and cons for both in a future video! Pa resident here as well! Hope to see that beauty at some future meets man

@RatchetWrenches

Жыл бұрын

Thank you man! 🤘🏽 this turbo kit is wild I would highly recommend going turbo but I have heard good things about the procharger kit as well! All comes down to personal preference. Hopefully you will yea!

@angelgjr1999

Жыл бұрын

@Go away Why? Super chargers have a smoother torque curve.

@tuckerprestridge559

Жыл бұрын

@@angelgjr1999 they also run off your crank and put a constant ware on your motor unlike turbos. Turbos spool just fine. And gave less limitations

@angelgjr1999

Жыл бұрын

@@tuckerprestridge559 Turbos run on hot air. Heat wears out engines faster than anything else…

@tuckerprestridge559

Жыл бұрын

@@angelgjr1999 something called an innercoooler, methanol, e85 etc.. let’s not forget all the heat soakin we have with root blowers.. and let’s not act like centrifugal blowers don’t produce heat as well or their wouldn’t be a need for inner cooler and meth injection on them.

Love the car & video! I've always said people sleep on 2v's

@RatchetWrenches

2 жыл бұрын

Thank you! And that’s so true!

Nice review!

@RatchetWrenches

2 жыл бұрын

Thank you!

Just the noise it make. Awesome

@RatchetWrenches

3 ай бұрын

The turbo sound and exhaust yeah it's rowdy at WOT!!

CODY is the MAN at Straight line solutions! hes helped me get my basic bolt on unopened 2004 2v running in the 12s, 12.96 is my best pass so far with a 1.75 60' with the stock 3.27 gears making 280hp and 330trq

@RatchetWrenches

2 жыл бұрын

He is and we're glad to have him as a sponsor of our channel now! Wow those are awesome numbers! I need to work on my 60ft / 0-60 badly lol I spin the entire way

Man it doesn’t even feel like six months but I’m so excited for you guys!

@RatchetWrenches

2 жыл бұрын

Thank you man! I know it flew by but can't wait for your build to be finished it's gonna be a monster!

@Sleeper_Solutions

2 жыл бұрын

@@RatchetWrenches when mines done I know I need to drive it 9hrs straight to you to test the driveability

@RatchetWrenches

2 жыл бұрын

@@Sleeper_Solutions that's the only way to test it. Then right after make a hit at the drag strip lol

@Sleeper_Solutions

2 жыл бұрын

@@RatchetWrenches you guys have a local track or no?

@RatchetWrenches

2 жыл бұрын

@@Sleeper_Solutions Island Dragway is the closest to us yeah! We're gonna try and make a trip out there before summer is over

I had the option to go with a custom assembled kit. My local speed shop came back with a quote of like 8500 dollars. Don't remember the specifics. But I ended up going with a Vortech V3. Car made 392 to the tire on 14 LBS with a snow performance kit, non intercooled. I'm very pleased with it, it's fun to drive and I still get great fuel economy if I decide to take it to work. But I've hit the same wall as you, the stock pistons. This winter I plan on keeping the stock block but running all forged internals and a windage tray.

@RatchetWrenches

2 жыл бұрын

That's pretty steep price but it sounds like you made the right call! Those V3's are sick and make good power! Throw an intercooler on there and you'll be even happier so will your IAT"s lol. But yes I plan on doing the same thing as my winter project. Going full send

@Adam_S281

2 жыл бұрын

14lbs should be making 500+

@BMW_DAILY

2 жыл бұрын

@@Adam_S281 yeah I was making 530whp on 14psi Kenne Bell intercooled

@spoolinsvt6489

Жыл бұрын

@@BMW_DAILY What was the engine set up? I am finishing up my 2.1 KB with a custom sheet metal inlet

@midnight347

Жыл бұрын

​@Adam S281 it's non intercooled he said must be killing performance even with the meth.

I just bought a 2000 saleen 281 it's not supercharged one but I'd like to do a turbo and just seems like this might be the best fit if you get a chance let me know what you think my car actually only has $12,000 mi on it I got an amazing deal with some beautiful shape

Man that's a nice Mustang 👌

@RatchetWrenches

2 ай бұрын

Aye thank you that means a lot! 🙌🏽

Hey do you have the link to maf adapter because the one thats linked in one of your videos didnt fit

Sicc, in the process of adding boost to my 99 vert.

@RatchetWrenches

2 жыл бұрын

Sweet! You're gonna love it

Damn that thing is a beast!

@RatchetWrenches

Жыл бұрын

Thank you!! 🤙🏽

It sounds so good.

@RatchetWrenches

Жыл бұрын

Thanks it really does!

Keep making content with this car .I been following since you guys started with it .(I have the same black gt ) I wanted the on3 kit but a kenne bell fell in my lap so I will have to go that route .anyways you two are doing a pretty good job so keep it up .any ideas on IRS SWAP or tourqe arm swap ? That's my next goal one of the 2

@RatchetWrenches

Жыл бұрын

Thanks for the long term support! People like you keep us motivated to continue to make content like this so we'll definitely keep it going. No plans for an IRS swap as of now but things could always change!

Awesome Mustang GT I have a 2004 Mustang GT

@RatchetWrenches

2 жыл бұрын

Thank you! And nice #teamnewedge!

Love the channel man Have you had issues with getting inspected with this system? Wish they offered a catted down Pipe for inspection purposes

@RatchetWrenches

Жыл бұрын

Appreciate that thank you! I actually had the car inspected pre turbo and we just broke a piston so I won't be getting it inspected until next year so I'm not sure

Cool for not wanting to hurt it, some people should check out motor trend and hot rod magazine's low-buck turbo build 2v mustang gt. Bone junkyard stock, changed some injectors, 36lbs if I remember right used a kit from cx racing initially a76 mm Turbo and intercooler and some other mods can't really remember but the article is on Google under low-buck Turbo 592 horsepower less than 2,300 bucks has a whole build list. Eventually I believe they went with a precision 76 mm handmade 640 all a single turbo kit.

@RatchetWrenches

Жыл бұрын

I ended up hurting it at the end of the summer unfortunately but it was the most fun I've had with the car in those 7 months the turbo was on. I'll have to check it out that sounds really cool. People always underestimate these cars!

I have an 02 GT I fell in love with a few years back when it seemed like no one was driving them or loving the 2V. I just bought another 03 and I absolutely love these cars. They seem to be gaining popularity quick as where the fox body’s stole the light for awhile like decades lol. BTW is that coolant reservoir the DNA motoring one? If so how has it been?

@RatchetWrenches

2 жыл бұрын

They really have awesome potential when you put in the work and they look and sound incredible! Couldn't agree more. The coolant reservoir is a Moroso it's been great no issues. Quality of the welds and fitment is perfect. Would highly recommend

@2vcrew782

2 жыл бұрын

@@RatchetWrenches amen to that they look amazing.

@michaelroecker2342

Жыл бұрын

Definitely gaining value they are 2V......In my mind they are a "new"classic .Less and less you see em on the road.When you do it's a 6 banger coupe still hanging on to daily driver chores.

@FWDSUXARSE

Жыл бұрын

Honestly if we're talking a fox body I prefer the Thunderbird, followed by the Cougar, and lastly the Mustang. Anything you can do to a fox body Mustang you can do to the Thunder Cougar twins and I just personally prefer those, although I might be partial to the Thunderbird since I've owned 3. An 88 Fox body and 2 MN12 Thunderbirds (an 89 with the lethargic 3.8 V6 and a 97 with the 2v 4.6)

Awesome car 👍

@RatchetWrenches

4 ай бұрын

Thanks!

Looking good brotha..👍

@RatchetWrenches

2 жыл бұрын

Thank you!

Wounder if this would fit an 02 2v explorer

I missed it somewhere.. but urs is a 02? with Romeo 4.6? I bought a 2000 gt (164,000 miles) with the Windsor 4.6, automatic, convert, to get around in while my 2002 ws6 convert (that was rear ended by a drunk and totaled) was being repaired and was told for price i cud afford they wud work on it here and there...ended up being 2 yrs :0 anyways my 2000 gt is a salvage beater, top is manual, missing interior parts, ect.. BUT came with BBK CAI, SR lowering springs, SR traction bars, and new black bullet rims and tires..Ive got Magnaflow Competition Series Dual Dump Cat-Back Exhaust connected to the factory H pipe atm, but have Hooker Blackheart xpipe brand new waiting to be installed..bought chrome knockoff "bbk" long tube headers but cant use because mine is a automatic. With my current set up and stock throttle body (i think 65mm) would I get same results as you have with yours? Or do I need the BBK 73mm throttle body and plenum? I dont know of any shorty headers that are made specifically for new edge's with auto do you?

KZread he was at Mexico when he film this video don't take it down 😏🤙🏼

@RatchetWrenches

2 жыл бұрын

Mexico videos only! 🤙🏽

North NJ here maybe we can meet for a cruise sometime popped my motor hopefully should have the new one in soon, I'm rocking a procharged 03 mach1

@RatchetWrenches

2 жыл бұрын

Hell yeah! Sounds sweet love a good ol procharged Mach 1

Nice stang Very clean

@RatchetWrenches

Жыл бұрын

Thank you

I’ve owned two 25ths and a new edge and to be honest I never liked the new edge until I owned one and I think I like the new edge the best out of the three I.M.O.

@RatchetWrenches

Жыл бұрын

They are great cars I love mine! So easy to mod too

Could I run this on a Crown Vic?

Right on!!!

@RatchetWrenches

2 жыл бұрын

Thanks man!

Subscribed Broseidon

@RatchetWrenches

2 жыл бұрын

Thank you!

Could I put a 96 motor in a 99 swap

Great review. I am on the On3Performance site and trying to configure for that same 2v Forward Facing Single Turbo System. What specific additions/parts do you have or recommend based on your setup? I have a 99 GT convertible and am going to get this versus the Vortech. Appreciate your input! Keep up the good work! I also enjoyed the Dr. Drew engine block removal technique. Never knew you could actually do it that way!

@RatchetWrenches

Жыл бұрын

Thank you! And funny enough Dr. Drew actually has a kit with almost everything you need in it to get started. It's a brand new kit. Message him on Instagram at sleeper_solutions. Any other odds and ends he can help with I'm sure. I would say it's important to have an overbuilt fuel system (injectors and pump), good intercooler/ thermostat, and a very good tuner tune the car! But yeah it was crazy to pull the engine that way but it did indeed work!

@apantale

Жыл бұрын

@@RatchetWrenches Thank you for informative and enjoyable videos. I will reach out to Dr. Drew. I know both of you have the experience to install all of this, where I am not at all mechanically inclined and have limited resources to do this myself. Two Questions, if you can answer: (1.) Any idea what it would cost to use a tuner shop installer?, (2.) My car has 52k original miles and one owner. Will this turbo kit be okay given the mileage? Thank you again. Alfredo

@RatchetWrenches

Жыл бұрын

@@apantale glad you enjoy the content! And I've only heard of one estimate of a shops labor costs to install the kit and tune the car and that was around $3,000. As long as you have big enough injectors/fuel pump, a good safe tune up, and keep it under 450ish HP, in theory you shouldn't have any problems!

Hopefully trading my tsx for a 400whp all motor 2v mustang gt 5sp. Needs paint badly if you're wondering.

what gauge pods do yall have for the wideband? love the build btw

@RatchetWrenches

2 жыл бұрын

AEM wideband and Turbosmart Eboost2 boost controller thanks!

I have a 04 GT automatic with Bullitt intake, Jlt ram air intake going out the fender, bbk dual plenum, Mishimoto Radiator etc. no air compressor. I’m trying to only get like 400-485hp do I need to change anything before I get a turbo?

@RatchetWrenches

Жыл бұрын

Nice! And depends what turbo kit you run (Hellion or On3 Performance) but On3 you need a tubular k-member, a arms and coil overs, and slot style MAF. Probably a few other things we made a video on what's needed too

With the gen2 kit do you NEED coilovers? I know the gen1 you did need coilovers along with the tubular k.

@RatchetWrenches

2 жыл бұрын

I was told you need coil overs to run the Gen2 kit yeah. Everyone I see and have heard of runs them. Tubular kmember is a must cause the hotside piping snakes through it on the passenger side

At what RPM are you seeing full boost? And what size turbo and rear A/R because I’m boosting my 5.4 3v Lincoln mark LT so trying to figure a good starting point. Thanks ahead of time.

@RatchetWrenches

22 күн бұрын

I wanna say it was around 5000RPM or so. The On3 Turbo wasn't great in my opinion. It was 76/65mm .96AR T4. Also I had MHS N/A cams so they weren't spec'd for my turbo application. Now I have custom ground camshafts with a 67/66 Billet T4 VSR Racing turbo that's SIGNIFICANTLY better. It's so worth it to buy a good quality turbo and custom camshafts let me tell you

Very nice, very well articulated video, clickage on the sub button incoming

@RatchetWrenches

9 ай бұрын

Thank you! Appreciate the sub. More content like this coming soon

Perfect timing dude I’ve been wondering if the kit was worth it or if I should just slap a supercharger on the car. Appreciate your input great video.

@RatchetWrenches

2 жыл бұрын

Really depends on your goals with the car but I absolutely love the turbo kit! Glad you enjoyed 👍🏼

Are we ever going to see this car go down the 1/4 mile? Would love to see that

@RatchetWrenches

2 жыл бұрын

Yeah we're trying to work out logistics of a track day with the mustang and the Audi S3!

I have an 02 with a vortech v2 running only 6psi. Full exhaust and mods to support it and have 350whp. How much boost you running?

@RatchetWrenches

Жыл бұрын

Nice and I was running 7.5 lbs

Did you ever switch the 3.73 rear end gears to 3.55? I am debating on 3.31 or 3.55 running a 27 inch tire.

@RatchetWrenches

Жыл бұрын

Nope I stuck with the 373s. I personally enjoyed the gear ratio but I have heard people liking the 355s as well.

Anyway I can getva link or where u bought the onn3 kit. I'm actually buying a 96 this morning, t speed turn key for 2k. Guy needs money. I want a turbo lol

@RatchetWrenches

7 ай бұрын

www.on3performance.com/shop/1996-04-mustang-gt-forward-facing-turbo-system/

It’s crazy these motors can handle 500hp from factory with stock interns I’m in the process of putting a lower mileage in my 04 gt

@RatchetWrenches

6 ай бұрын

It is pretty crazy! Mine blew a piston ringland after 6 months of being boosted but it was a blast while it lasted

Thinking about buying my dads 02' GT 5 speed if he doesn't sell it within the year. This peaks my curiosity lol

@RatchetWrenches

2 жыл бұрын

That's exactly what this car is! I would totally do it!

Men, your car sounds like a beast. I like it a lot. I have a 2002 automatic. Maybe I'll put that turbo on mine. It has long tube headers. It has stage 2 comp cams and other things. Is that turbo that your car has worth $2,600?

@RatchetWrenches

2 жыл бұрын

Thanks! And the whole kit costs $2600 but you need to upgrade other components too so it'll end up costing you more than that

@Wizardman86

2 жыл бұрын

Do you have the Mac LT headers?

@rlstang7276

2 жыл бұрын

@@Wizardman86 yes sir

@rlstang7276

2 жыл бұрын

@@RatchetWrenches Ah ok ok so did you do this too? Billet Wheel Upgrade for 70mm, 76mm, or 78mm?

How many mpgs do u get (regular driving not flooring it 24/7)

@RatchetWrenches

9 ай бұрын

Honestly never really calculated it since it's not my daily

Hello can you please send me a link to your mass air flow sensor ?? Having trouble finding one or maybe I’m just slow

@SCJcontent

Жыл бұрын

I’m trying to piece together the right one for my 39lb ford performance injectors

@RatchetWrenches

Жыл бұрын

www.summitracing.com/parts/SCL-BA-5000

I want this exact set-up if possible somebody throw the link in the comments please, First Mustang build!

@RatchetWrenches

5 ай бұрын

Here ya go! It makes the car 10x more fun to drive www.on3performance.com/shop/1996-04-mustang-gt-forward-facing-turbo-system/

Is this kit smog legal in California? If now where could I get smog legal turbo kit for 4.6?

@RatchetWrenches

Жыл бұрын

I'm not 100% sure but I highly doubt its smog legal. Not sure any off the shelf kit will be smog legal. You'd have to weld in a cat

Clean ass 2v 👌📽

@RatchetWrenches

Жыл бұрын

Thank you!

Are you running stock transmission and how much power will the stock transmission take

@RatchetWrenches

Жыл бұрын

Yeah stock transmission. All depends how you drive it but I've heard anything over 500 is in the danger zone

What tune do you have since installing the t/c??

@RatchetWrenches

Жыл бұрын

I brought it to a shop to be dyno tuned

Is this 76mm the 65 or 75 exhaust side? Spools nice. Trying to decide how big to go with a built motor 3v.

@RatchetWrenches

Жыл бұрын

It's the 76/65 so smaller exhaust housing. On3 sells their "BMF" turbo which is 76/75 and apparently is good for 800+HP

@gforce_117

Жыл бұрын

@@RatchetWrenches gotcha thanks! Yes I’ve been looking at the BMF they’ve made over 800 wheel with that one.., crazy!

What all would you recommend doing before adding turbo?

@RatchetWrenches

6 ай бұрын

Depends what your power goals are. But if you're trying to turn it up and make good power a good set of camshafts and a built bottom end will help a lot and would be a good start

How is the brake upgrade review after you installed it

@RatchetWrenches

Жыл бұрын

Brembo brakes were a great upgrade the car definitely needed them

I noticed on their site that you need to purchase their suspension kit to make the system work?! I’m only on lowering springs and was wondering how accurate that is..

@RatchetWrenches

Жыл бұрын

You'll need a tubular k-member to make this kit work since the exhaust on the passenger side goes through the actual k-member. On3 built their kit around the UPR k-member, a-arms and coil over kit which is what I'm running. No issues so far. There is also Team Z which is a good brand

@johntron1237

Жыл бұрын

@@RatchetWrenchesthank you for this this answered my question

If I wanna hit 450-480whp on a stock bottom end could I possible do H/C/I along with the turbo?

@RatchetWrenches

Жыл бұрын

Those numbers are achievable without H/C/I for a turbo 4.6 2v. Would I recommend hitting those on a SBE? Probably not. Anything above 400-450HP range starts to get dicey and anything can happen. I had a piston ringland failure randomly after just 6 months.

@TheJMan1K

Жыл бұрын

@@RatchetWrenchesdecided to go with a used kenne bell kit off a friend and have set of Boss 302 rods on the way. Just had a new TKX arrive at my door so tranny swap in the works for this weekend.

@RatchetWrenches

Жыл бұрын

@@TheJMan1K that set up is gonna be bad ass! I love KB's. Good luck with the build!

So did you get just the kit for 2600 and just upgraded the turbo?

@RatchetWrenches

2 жыл бұрын

Bought the kit as well as all UPR suspension up front and some other Misc items I listed in the video. The turbo upgrade was free.

Where did you get your front chin spoiler?

@RatchetWrenches

Жыл бұрын

Magic Drift

Whats the best budget turbo kit for the 4 valve?

@RatchetWrenches

Жыл бұрын

On3 Performance makes a nasty twin turbo kit a lot of the 4v guys run and make 800-1000HP easy

Hey what cylinder heads are you running?? I love it.

@RatchetWrenches

Жыл бұрын

Just the 2v PI heads, thanks!

@SCJcontent

Жыл бұрын

Thank you!! I have a Non PI I always wondered what is the power difference that the non Pi vs Pi heads could take with boost considering the increased compression….

sick build! what’s your suspension and tire setup?

@RatchetWrenches

Жыл бұрын

Thanks! Coilovers in the front, lowering springs in the rear with 315's in the back and 275's in the front with 17" wheels.

@XxTheIOSGAMERxX

Жыл бұрын

@@RatchetWrenches sweet! i don’t know much about tire sizes for fitment so just to make sure , are they 315/35? or what sizes are they for the front and back. Thanks for your help

What you do with your exhaust? Did you split it back into duals at the end of the turbo down pipe?

@RatchetWrenches

Жыл бұрын

Yeah we used the On3 exhaust components and connected the catback to the y-pipe provided in the kit

@95Sn95

Жыл бұрын

@@RatchetWrenches cool thank for the reply I love your new edge, hauls, look out coyotes!

@RatchetWrenches

Жыл бұрын

@@95Sn95 thanks and yeah next year I'm shooting for some decent power so I should be able to walk coyotes no problem. #2vgang

Perfect example of why paying 35,000 for a new edge cobra is crazy. If you bought a 2v before the insane price hikes. Probably got it for around 4,000. Add a kit like this for another 5,000. Then you are around 435 hp to the rear wheels. Compare that to 395 hp to the crank on factory cobra. So you are smoking the =÷××÷ out of any factory cobra and still have 26,000 in the bank for NOT buying a cobra. Not knocking the cobra. I love all new edges... even the v6. Just speaking up for the 2v. Everyone is in love with the cobra cause they put Manley pistons in it. Guess what 2v haters. They sell Manley pistons for the 4.6 2v too.

@RatchetWrenches

2 жыл бұрын

Hahah love this comment its so true. You could build one nasty 2v Newedge for $10k on a budget and smoke a lot of people! #teamnewedge!

@vmoya6631

2 жыл бұрын

@@RatchetWrenches If every part off the cobra didn't bolt right up to a v6 model I would think it was special. Again I like all new edge cars. Just silly when dudes treat a new edge cobra like it's a Ferrari and trash talk all the models below it. And when true mustang dudes trash talk the 2v like it's a 85hp 4 banger. So crazy man

@gerald4535

Жыл бұрын

Even if you didn't buy it before the price hike it's still worth it. I paid 8k for my New Edge and it'd still leave you with 22k in the bank.

@vmoya6631

Жыл бұрын

@@gerald4535 Stinks that the 2v has been trash talked for a solid 20 years. No doubt though these turbo and supercharged 2v cars will rewrite the 2v rep moving forward. Im sure there was a few dudes out there that did this long ago. Over all though not enough boosted 2v cars out there to get the respect it deserves. Even the v6 new edge gets love in my book. I drive my v6 as a daily. Gets great gas mileage. If I want to move faster I hop in one of my gts that I currently own.

Oyeah 🎉sweet

@RatchetWrenches

Жыл бұрын

Thanks!!

Hey, just wanted to say I love your set up. I've been thing alot on boosting my town car. But, a co-work was recommended turbo. Oh, not sure if your car is drive by wire or spring. If it's drive by wire. I was going to recommended for you to try jms pedalmax. It doesn't mess with any tune that you may have. It just piggy backs to your throttle pedal. Trust me, it makes a huge difference. I have mine on 75% and it's super responsive. I watched alot of KZread videos on it and thought they where just over Exaggerating. But, it's the best 250.00 bucks i spent.

@RatchetWrenches

Жыл бұрын

Thank you! And yeah turbo has more advantages over a supercharger IMO but the superchargers are perfect for instant power. Interesting I'll have to take a look into it. Usually the turbo spools quick enough for me

What gears are you running? I have 410s w fbo and just bought on3 kit, but everyone is saying to run a higher gear ratio.

@VerticalGamingStudio

2 жыл бұрын

Short gears are there to make up a lack of torque. When you already have boatloads of torque, you don't need the shorter gear. Terminators came with 3.55s. You're likely to light up all of first and second, depending on the quality of tire you run.

@stephenbarnes8834

2 жыл бұрын

@@VerticalGamingStudio Thats what I figured. Should I swap my stock gears back in?

@luisuribe5432

2 жыл бұрын

@@stephenbarnes8834 you can buy a taller tire would also help gear it down

@RatchetWrenches

2 жыл бұрын

I'm running 373 Ford Performance Gears. 3.55's would probably be the best for this turbo kit from what I've researched. I can light up first and second all day long

What size throttle body did you go with?

@RatchetWrenches

Жыл бұрын

78mm

Yo did your rear louvers fly away? I notice there gone.

@RatchetWrenches

Жыл бұрын

Nah we took them off, we kinda go back and fourth with putting them on and off

Were can i get the turbo send link please

@RatchetWrenches

5 ай бұрын

www.on3performance.com/shop/1996-04-mustang-gt-forward-facing-turbo-system/

Crazy to think how a heads, cam, intake foxbody with a On3 kit makes around 520-530 at the tire while this makes 435

@RatchetWrenches

2 жыл бұрын

This is essentially on the lowest boost possible. I could easily bump it up to 10PSI and make close to that but I would probably grenade my pistons so I'd rather not do that.

@not2day646

Жыл бұрын

the foxbody also doesnt have those sexy curves ;)

@sategllib2191

Жыл бұрын

Gonna need a whole new block in a pushrod 5.0 before you crack a block

@sixoid4104

Жыл бұрын

@@sategllib2191 clearly you don’t know what you’re talking about lol. Proper tuning makes a difference buddy. Push rods are the way to go, unless you have money for a coyote

@sategllib2191

Жыл бұрын

@@sixoid4104 I don't think you know what you're talking about. Old pushrod 5.0s are infamous for cracking blocks at about 500hp, any more and you need an aftermarket block. Any modular blocks will handle 1000+HP easy. Overhead cams > pushrods

Did you change the clutch?

@RatchetWrenches

Жыл бұрын

In this video it’s a stage 2 clutch yes

I wonder how long it would have lasted if the Rings were gapped

@RatchetWrenches

9 ай бұрын

Probably a good bit longer but we're pretty sure this failure was caused my detonation from bad fuel or a bad fuel injector

How much did the whole kit cost you? Considering either a vortech or this kit depending on price

@RatchetWrenches

2 жыл бұрын

Not sure exactly but I would say everything said and done around $6k. We have a full video with parts and price breakdown if you're curious

@P71ScrewHead

2 жыл бұрын

@@RatchetWrenches The n/a build i'm doing will cost me that after $2k in labor.. TrickFlow top end..

@RatchetWrenches

2 жыл бұрын

@@P71ScrewHead yeah its almost not worth building these motors without boost. So much money for so little power

@P71ScrewHead

2 жыл бұрын

@@RatchetWrenches Well, kinda the same with a Coyote but that engine is just a built 4v Modular n stroked almost to the max.. I think these Mod motors are worth building bcuz the blocks can handle over 1k hp.. Doing anything other than just forged internals n boost is simply to not need to use more lbs of boost to make more power which would generate more heat..

Is building the engine up worth it?

@RatchetWrenches

Жыл бұрын

I would say 100% yes if you have the money obviously

Your transmision is stock?

@RatchetWrenches

9 ай бұрын

Yep

How many psi are you running? Maybe i missed you say it

@RatchetWrenches

Жыл бұрын

7.5 was the max

@misterbulger

Жыл бұрын

@@RatchetWrenches That's enough for a good time without getting to wild. Thanks for the video! Mine is so good NA my issue would be id have to stop driving it to complete the project LOL. They keep giving me a company vehicle then taking it away then giving it back... maybe if they'd make up their minds I could commit to taking it out of service for awhile. I just dropped a bunch of money on my personal work truck just for them to give me a brand new F250 2 days later, but I have a feeling I'll lose it the minute they find a new foreman 🤔. Hows your MPG's now? I average 33mpg right now ha. That's why it turned into a work car. Plus who doesnt love ripping around on the clock?! My personal truck gets 11mpg and is too big to park in the city so it sits for the snow days.

Is your whole engine stock just with a turbo and intake added?!

@RatchetWrenches

Жыл бұрын

Nah I had upgraded camshafts from MHS. But everything else is basically stock yeah

@xx_yeetosaurus_xx3903

Жыл бұрын

@@RatchetWrenches now thats cool man

Did you tune the ECU

@RatchetWrenches

Жыл бұрын

We had the car professionally dyno tuned

Did you change the k-member

@RatchetWrenches

2 жыл бұрын

Yep swapped in a UPR tubular kmember no issues so far great product

@leonardstarling252

2 жыл бұрын

@@RatchetWrenches... that is what I was planning on doing also. Thank you for the information and God bless

Where did you order it

@RatchetWrenches

2 жыл бұрын

Check the link in our description of the video we have a new sponsor for the channel Straight Line Solutions. SLS is a dealer for On3 Turbo Kits they'll take care of you!

Dude thee cars rip when they’re boosted. 400whp in a new edge rolls the fuck out. They’re not heavy cars. And with good suspension they handle on rails too.

@RatchetWrenches

Жыл бұрын

Exactly! They really do. We got big things planned with this for next year, building the motor soon and ramping up the boost even more.