Hello Great product! I have a request, I have purchased the Luxpower lxp-lb-US 12k . I would like for you to cover it as well as you have done here with the 5k unit. The Luxpower lxp-lb-US 12k inverter has been mention many times on several forums and many are interested in this unit as it is very similar to another brand but handles more power. I would appreciate it! Good day mate!

thank you for this rich video. can I know the name of this software to draw?

well done good presentation

@hanzlightdiy4670

Жыл бұрын

Thank you, just sharing my idea.

That was great

bro.very god

Amazing 🤩 By any program do this presentation?

Hello please explain the Digital I/V/W Protection Relay connection. Otherwise great video 🤟

What will be the purpose of your spare module contactor🤔

at 6:34 the positive red wire is output to ATS from left hand side but all other red wires are on the right hand side, any idea about this occasion ???

@hanzlightdiy4670

Жыл бұрын

It depends on your ATS orientation where the Live and Neutral connection is. At 1:46

Can you as well show us how to ground both grid and eps right from the inverter

DC ground and AC Ground are common ground ?

Mere flat me DG hai, lekin start hone me 10-12 minutes lag jate hai. kya main inverter laga sakta hu? Light jate hi inverter on ho jai aur DG start hote hi inverter off ho jae. Kya Aisa wiring possible hai?

Grounds that go from AC SP, PV SP and Device ground buss bar are going each separately to to the ground. Does it means there should be actually three separate wires going physically to the ground or theu can be combined with say a buss bar to have single wire leaving the house?

@hanzlightdiy4670

Жыл бұрын

Yes you are right. You can combined all in one bus bar and increase the wire size going to the ground rod. Thank you.

Good morning, my 2.4kva hyprid inverter when connected to my lithium battery, there is current on both wires of the AC output, why?

@hanzlightdiy4670

Жыл бұрын

Yes, because it is a complete loop of resistance.

Your neutrals should not be coming from your circuit breakers, they are connected to a neutral bus bar.

@hanzlightdiy4670

Жыл бұрын

Yes correct. It depends on what type of breakers is available.

@stephenswanepoel3722

Жыл бұрын

@@hanzlightdiy4670 I have a 1000w ups inverter that plugs into the grid and then I have a 200 ah gel battery. Can I add a 100w solar panel with a 30amp solar charge controller.

@hanzlightdiy4670

Жыл бұрын

@@stephenswanepoel3722 Yes you can add but it is too small for your 30amp SCC, assuming your solar panel specification system Configuration is 100w/5amps/12vdc, it would take 40hrs to full charge your 200ah battery. Study the basic “ohms law formula” for calculation. (Just sharing)

Hello, we are an energy storage-related supporting company, and we want to see if there is an opportunity to cooperate.