On going!!! Different Sowing SPEEDs in the Corn Crop. Training Camp 🌽
In the video we show the work carried out at different sowing speeds, despite not having the other factors as we wanted, this test was carried out so that you can observe the differences that exist in the yields, the only variable being the sowing speed.
Regarding the sowing speed, it is postulated that at a lower speed (4 and 6 km / h) the
seeder achieves a better seeding of the land by the seeding bodies,
improves implantation conditions and crop yield. At higher speed
(14 km / h) the planter body has higher vibrations and produces higher
jumps and would increase the unevenness of copying the terrain, producing
potential decreases in crop yield.
To keep in mind
To ensure that the set-up of the seeder is adequate, we must take it to the field to be sown and make it work with the capping and compacting organs raised, that is, they do not work. In this way we have the furrow open with the seeds in sight so we can easily detect the presence of failures, or what is the same, the lack of any seed in the row and double discharges.
It is recommended to take as duplications those seeds whose separation between them, in the furrow is less than half the theoretical distance sought. That is, if we want to sow 5 seeds per meter of furrow, the theoretical separation sought is 20 cm; then those seeds that are separated by less than 10 cm will be duplications. On the other hand, a lack of seed is considered when the separation is greater than one and a half times the desired separation, for our example 30 cm.
Пікірлер: 33
Excelente ensayo!!!
Ingeniero un vídeo donde explique un poco un análisis de suelo !
Buenas tardes, buen video , buenos rendimientos, un trabajo de una campaña , bien clarito los resultados, a seguir aprendiendo y asi sumamos todos , gracias, abrazo desde la provincia de Tucuman, norte de Ágentina.
SALUDOS CORDIALES DESDE TUXPAN MAYARIT MEXICO
@IngenieroOrozco
2 жыл бұрын
Muchas gracias por pasar al video saludos hasta Tuxpan Nayarit
Excelente trabajo durante todo 1 año, Saludos ingeniero Orozco
Excelente trabajo ingeniero Orozco
ING buenas tardes soy un seguidor de ud.un video más claro ni el agua.ing voy a probar esa semilla .nk880.ahy q pedir un buen temporal a Dios nuestro Señor.saludos desde Acatlán de Juárez.jal
Muy interesante video ing muy esplicado grasias por compartir sus conocimientos .yo cuando visite su campo me sorprendi de su trabajo que estan realisando .este año quiero probar esos materiales
Exelenticimo video ing saludos
Excelente investigación, saludos inge
Que tal ingeniero Orozco, ya hacía falta un vídeo más, para seguir aprendiendo de tus conocimientos, saludos desde Tuxtepec Oaxaca
@IngenieroOrozco
2 жыл бұрын
Si una disculpa tarde algo en subir un video saludos estimado
Muy buen video explicativo
@IngenieroOrozco
2 жыл бұрын
muchas gracias
Que tal inge, buenas Recomendaciones , Gracias por su labor !
@100cesarin
2 жыл бұрын
Y por ejemplo a 6Kilómetros a que velocidad (1ra,2da y cuanto lo revolucionó tractor jonh Deere?
Saludos amigo 💯🇲🇽💯🇲🇽🇲🇽
Es en sembradora de aire o mecánica? Que velocidad es la ideal en sembradora de aire John Deere 1755?
Buenos dias ing soy nuevo en la siembra del maiz elotero 7573 que me recomienda usted par tener un buena cosecha en parte no se llena mi elotes que tipo d3 fertilizante debo usar
En la siembra que más aplican (algún fertilizante, insecticida)
2 жыл бұрын
Cada cuándo y cuántos riegos se debe hacer en este cultivo y en qué etapas se deben hacer las fertilizaciones
Que chulada ing...ya quisiera tener esos rendimientos...aqui sacamos de 5 a 7 por hectarea...me gustaria un maiz rendidor para sacar minimo 9 por hectarea
@IngenieroOrozco
2 жыл бұрын
Poco a poco ir incrementando estimado todo es posible ir mejorando en ciertos aspectos saludos
Que variedad de maíz es inge?
23 cm entre planta y planta seria mucho espacio?
@Bondadfler
2 жыл бұрын
Todo depende de la distancia entre surcos que usted utilice. Por ejemplo esa distancia está bien a una distancia entre surcos de 45 CM.
Buenas tardes inge, dónde conseguir nitrato de amonio
@IngenieroOrozco
2 жыл бұрын
De dónde eres?
@deyvilopez5299
2 жыл бұрын
@@IngenieroOrozco la misma pregunta me encuentro en tabasco.
@sirblas
2 жыл бұрын
De La Barca Jalisco
Hola
@IngenieroOrozco
2 жыл бұрын
Hola 👋