Omron 3G3MX2 Quick start guide
Ғылым және технология
Quickstart guide: bit.ly/3GiwMWF
Omron 3G3MX2 user manual: bit.ly/3CiVSlQ
0:00 Introduction
1:07 Unboxing
3:08 Install
4:54 Factory reset
6:41 Autotune
8:55 Frequency Control
9:32 Bonus Tip - Start frequency
Пікірлер: 24
Thank you very much your video was very helpful 👍🏻 it was easier than reading through the instructions Nice and quick start up Because I never really installed this brand thanks again
@shawncowdrey1552
2 жыл бұрын
My pleasure, thanks for the comment.
Helped me in a bind, thanks
@shawncowdrey1552
Жыл бұрын
Glad it helped
Any chance of getting a video on the outputs? I struggled with the frequency arrival settings. C23 and c42/45 for thresholds. dont remember the correct parameters now. But refering to output 12. As i read in the manual i could use 3 different outputs if i had the corresponding parameters set correcly.
How do you resolve error E22..1 on Omron 5.5 kw
Sir, omron mx2 inverter This parameters are not showing H103 H111 H112 H113 Access not possible Below H 50 and Above H 200 showing ,pls reply
@shawncowdrey1552
2 ай бұрын
Hey, I haven't looked at this page in a long time. I see the AU site is down so here is the link to the EU datasheet. assets.omron.eu/downloads/manual/en/v3/i570_mx2_users_manual_en.pdf Looks like your unit was locked. Use b031 to unlock or try re-set
Does it need external overcurrent protection?
@shawncowdrey1552
2 жыл бұрын
It is recommended but will run without it.
How to set the motor at constant speed under variable load
@shawncowdrey1552
6 ай бұрын
Good question. This often applies with conveyer belts and requires an encoder.
Hello, What meens E 30.4?
@shawncowdrey1552
Жыл бұрын
Sorry for the late reply. E is an error code. E 30 is a drive error for overcurrent. See more here - www.edata.omron.com.au/eData/Inverters/I570-E2-02B.pdf#page=299
please :How setup 3G3MX2 dc Braking
@shawncowdrey1552
Жыл бұрын
Hello Dien. I have moved countries in the last year and don't have access to a 3G3MX2 anymore but you can look into the datasheet: www.edata.omron.com.au/eData/Inverters/I570-E2-02B.pdf Page 131.
@Goon16
Жыл бұрын
hello dienpham,Bạn setup được DC bracking chưa có thể hướng dẫn mình với ạ
E22.1 problem sloved plese help me
@shawncowdrey1552
2 ай бұрын
Sorry for the late reply. This is a CPU Error. No idea how to resolve it.
I need to parameters manual
@hamedelmalke8258
Жыл бұрын
+1
@shawncowdrey1552
2 ай бұрын
Hey, I haven't looked at this page in a long time. I see the AU site is down so here is the link to the EU datasheet. assets.omron.eu/downloads/manual/en/v3/i570_mx2_users_manual_en.pdf
Comment change le sense
@shawncowdrey1552
2 жыл бұрын
Pardon. Voulez-vous dire de demander comment changer à l'aide d'un potentiomètre? (Google Translate)