Looking forward to hearing that blade singing.

fantastic, I do envy your ability, for me I'm no longer able to do the things i used to do, watching you bring back happy memory's keep up the restoration and i look forward to seeing you cur the first log

@AFHProjects

2 жыл бұрын

Thank you, sir! Glad you like it. I'll do my best.

Great work!! Best way to tackle a huge job like this is breaking it into segments and working on a section one at a time.. You are getting there,slowly but surely!!👍💯

Your determination and eye for detail is exemplary.

witaj :) super się ogląda jak ktoś się morduje nad złomem postępy w remoncie widoczne pozdrawiam serdecznie a u nas pada deszcz i wieje

This mill is going to be in great shape when you’re done!

I REALLY look forward to the next video. Doing GREAT at straightening stuff back out. The way that mill works will sure be interesting! THANKS and GBWYou!

Congratulations! It is a meticulously, patiently, step by step, and well done job!! Waiting for the first test!

@AFHProjects

2 жыл бұрын

Thanks! 👍

Starting to look like a good sawmill

Excellent work so far. Well done for your hard graft.

@AFHProjects

2 жыл бұрын

Thanks! 👍

Well done !! Tiring but great work. Ciao

Dear AFH projects guy. 👍👌👏 Very well done again and as always (video and work). I love to see old but good stuff getting restored and put back in use again. I'm really glad that you saved this sawmill from being scrapped. Please kindly allow me to make a suggestion: After you cleaned the big bearings from all the old and dirty grease so well, it's important to pack them with grease. Especially because you used a degreaser. I'm eagerly looking forward to watch the next video. Thanks a lot for making teaching explaining recording editing uploading and sharing. Best regards luck and health.

@AFHProjects

2 жыл бұрын

Thank you! You're welcome here! I think I packed them well. Someone said that 1/3 of grease is the maximum to put in to avoid heating.

@Chr.U.Cas1622

2 жыл бұрын

Dear @@AFHProjects You're welcome, it's my pleasure. Thanks for replying and especially for another heart. I totally appreciate both very much. 2) If you use the grease nipples, you usually pump until a bit grease comes out somewhere (it's the same procedure all over the world). This means, that all empty spaces got filled with grease. Not only therefore I've never heard of something like only filling with grease up to 1/3 of the space. It's moreover way more common and logical, that bearings and races become hot and damaged because of too less lubrication (frictional heat between metal respectively steel pieces)! In such a case the grease can melt to oil and begin to vanish even through very tiny gaps. 3) It's definitely different when oil instead of grease is used as a lubricant in closed spaces (transmissions/gear boxes,, differentials etc.). Then you usually only need to have oil in round about 1/3 of the space. But of course it's your great sawmill and you can do whatever you want with it. Sincerely yours.

Siitä se alkaa vanha saha kuntoutua. Huolella kunnostat ja ammattitaitoa on.

Do you have any idea when this mill was made? Looking forward to you cutting the first log on it!

@AFHProjects

2 жыл бұрын

I don't know. Maybe someone can tell here in a comment when these are produced

A face shield when using the grinder saves the eyes!

@AFHProjects

2 жыл бұрын

It does.

👍🏻❤️

Bra jobbat! Hejaheja.

@AFHProjects

2 жыл бұрын

Tack!

You are sure coming along with this rebuild. Looks like a lot of work, but you seem to be up to the challenge as well. I await the next video... Are you going to wire brush the surface and repaint it? Thumbs Up

@AFHProjects

2 жыл бұрын

Thank you! I'm not going to paint it now. Maybe when all is working perfectly and then.

WÜRTH 👌🏽👍🏽💪🏽

Läheb lendu su kanal 👍 tubli töö!

Will this fine mill be getting a little paint ?

@AFHProjects

2 жыл бұрын

Maybe when it's done and works perfectly

Man... You work alone. You need some backmussle relief! Get yourself a worklift. Something like to pull up a motor out of a car apparatus. Be nice to your body. 😎😏😉 Great work man. Like your content👍😁

@AFHProjects

Жыл бұрын

Yeah, I like to work alone. Have to be careful with my back for sure 😉 Thanks 👍 Cheers!

which is the diameter of the hole of blade ?

@AFHProjects

2 жыл бұрын

I think it's 50mm but not sure yet.

Was machst mit der Säge

@AFHProjects

2 жыл бұрын

Die Stämme, die ich im Winter aus dem Wald mitgebracht habe, werde ich fällen.

22

kyllä siitä lautamylly vielä tulee