Really appreciate these videos! Thank you for taking the time to share it with us!

Thanks for this dude, I ran a okuma today same model and whoa what a change from Mori’s.

i remember using the renishaw functions on a mzak, exact same interface. Also, you had to push multiple times to get the "single Cycle". It's nice to know it's something that didn't only happen to me XD

Very good video thank you

Nice. Thank you.

GoProbe phone app, Probe Setup, and Set and Inspect are essential these days if you buy new machines from any builder. Cool seeing it on an Okuma. Haas has it built in with that VPS feature, Mazak has it very well integrated as well.

Very cool!

Good 👍👍👍👍

Thanks .!!!

Use G56HA so you don't get mixed up with hight numbers and it doesn't limit you to 300 offsets, you can use up to eight digit tool numbers, in my case I use the first digit for tool type followed by diameter in decimal, like tool 10125 is 1/8” drill, 20250 is a 1/4-20 tap.

@NerdlyCNC

2 жыл бұрын

I don’t do it because my post isn’t set up that way.

@jmaks

2 жыл бұрын

@@NerdlyCNC I edited the fusion post. You can still use it when hand typing in MDI, HA is the same as T12 H12

@NerdlyCNC

2 жыл бұрын

@@jmaks i know....i just mean for my own habit...when looking at code

@mustafan.4861

Ай бұрын

Habits can change. Thanks for sharing this excellent idea!

What does the inside of the tool changer door look like Need to see if mine is missing sensors

Great vid Jason 👍 Thanks for taking the extra time to shoot and edit these vids BTW…. I notice that the tool setter on the LH side of the table, has the sensor part ‘outboard’. Most setups I see on vids have the tool setter sensor swung around so it’s ‘inboard’. Any special reason for your set up? Regards, Robert

@jasonmc3345

10 ай бұрын

Looks like a brand new machine that's never made any or many chips. Likely just an oversight on the tool touch probe setup. I have mine so its inboard and I've cut the post down so its much shorter and closer to the tops of my vises.

1st off I love this content, as a new 560 s/u operator, I wanted to know how close to the center of the part for accuracy do you need to be so the Renishaw probe doesn't miss the edge and damage it ?

@3RPRECISIONMFG

Жыл бұрын

it needs to be jogged to an approximate distance for it to trigger properly. Depending on which probing routine you are running there are distance values that you input and "overshoot" travel values as well. It comes down to incremental distances.

Thanks for video. Going to be a new mv560 user. Is G116 what Okuma uses instead of M6 for a tool change?

@kristianjensen5870

7 ай бұрын

No. It is a macro that handles diffrent next tool issue. You can use M6 also.

Hmm, interesting. I know you bought an Adaptix from Norgren Workholding but I see typical softjaws in the video. Did something not work out?

@alanparker1952

2 жыл бұрын

Been wondering about that myself

That's a lot of menus and button clicks to set zero vs a Haimer. What are some big advantages to a probe that would win over a Haimer and would you recommend one for someone doing lots of prototyping and one offs?

@NerdlyCNC

2 жыл бұрын

Automation.

What ever happened to your m460 5 axis? Also, how do you run full rapid and tool change without shutting the door?

@socrates5573

2 жыл бұрын

He didn't buy that 5AX, he bought this M560 instead

I like the physical button layout etc but the software looks like a lot of fiddling compared to a Heidenhain control.

Hello dear my name is İsmail There is a problem on my machine, it gives 5223 buffer overflow error, we take the Md1 file about it, we get this error when calling the program auto, do you know?

Sir vmc offset steps by step guide mi sir help my from India use okama vmc machine