Oculus Quest 2 Controller Drift Repair / Switch replacement.
Ойын-сауық
My son's Oculus Quest 2 controller had a very bad drift. I found a replacement kit on Amazon that included everything needed for the repair. Figured I would give it try. After a couple small mishaps during the repair, it works like new. If you have any questions or comments let me know. Thanks for watching.
www.amazon.com/dp/B0B1KVPCNX?...
Пікірлер: 174
I've watched 4 videos on KZread and I think yours is the best. Clear... No annoying chatting away nonsense 😂... Perfect thanks
31:07 keep track of the orientation of the spring part when removing/reinstalling. One side where the screw goes thru has an extra tab. Flip it the wrong way and one thumb sensor won't work.
@StealthStrikerXYT
7 ай бұрын
Dude your a life saver
@LEPHROGFISH
5 ай бұрын
Good thing I decided to look at the comments. I get my replacement joysticks in 2 days. I gave to do 2 controllers😬
@JayHawk4372
4 ай бұрын
You know, I thought I oriented it correctly but then it didn't work.
@JayHawk4372
3 ай бұрын
Ok it's happened twice now, I definitely oriented it correctly the second time.
My 9 year old son and I watched and worked on the controller. He did a lot of it! You were such a help. Thank you.
@metamechanic9369
6 ай бұрын
Glad to hear it !!!
thank you for this video man, some other youtubers don’t show us the whole thing. You took your time showing us how to do it, thank you!!!
@metamechanic9369
11 ай бұрын
Thank you!
Mate, thank you so much, my left controller has been drifting for a few months now and with this video I was able to fix it (minor hiccups) so thank you
@metamechanic9369
Жыл бұрын
Happy to hear it is repaired!
I followed the best I could. Both controllers anolog was broken. Hopefully I did it right, thank you again for this video.
Thanks for the video man, just fixed my controller following what you did and I'm happy to say it's working once more! Have a good day internet stranger
Thank you for the video! Controller drift successfully fixed.
Total pain !! But impossible without your video THANK YOU !!!!
@metamechanic9369
11 ай бұрын
Glad it worked out!
Worked well. Make sure you buy a pair of new sticks. The first one I had was faulty. But since this guide was so easy it took less than 10 minutes to install the new one. Working PERFECTLY!
This helped out a lot in figuring out how to reinsert that ribbon cable between the handle and main body of the controller. Before now I hadn’t seen a way to separate that back piece of plastic from the handle. Thanks so much!
@metamechanic9369
4 ай бұрын
Glad It worked out for you!!
Just a mom trying to fix her kid's "controller drift", worked perfectly! Thank you for saving my bank account from having to buy a new controller!!
@JAYZ999
Жыл бұрын
Coolest mom ever
@rey5597
Жыл бұрын
Great job! About to tackle it myself. I’m pretty handy and it’s looking pretty daunting. Wish me luck lol
@PONGO_
Жыл бұрын
My mom wouldn’t give a shit about my stick drift if I was a kid she would have just said I broke it or sum
@hangrywendigo.7057
8 ай бұрын
I feel you, a new controller is like 70 bucks, it’s nuts
@Anonymous61136
5 ай бұрын
@PONGO_ My mom would just continue watching TV.
Thank you so much my left controller works good as new. Now I wait for my right one to get stick drift lol.
yoo, this worked like a charm, no more drift. replaced the joy sticks for both controllers.... thanks alot
@metamechanic9369
Жыл бұрын
Glad it fixed your issue!
Aye I wanted to drop by and say thank you boss, your video allowed me to install my new stick in with 0 issues at all, you didn’t break it as it’s meant to be that way when you disassemble it but you did a fantastic job!!! Thank you boss man!! ❤ much luv to you
@metamechanic9369
7 ай бұрын
Thanks!!!
Thank u. Incredible tutorial. I accidentally ripped one of the black ribbons a good bit but somehow everything works!
@metamechanic9369
7 ай бұрын
Well that's good news!
Thank you so much I was able to fix my son's controller and it works perfectly
@metamechanic9369
5 ай бұрын
Glad to hear it!!
Works! Thanks!
@metamechanic9369
7 ай бұрын
Glad it worked out!
I love you this video is the reason I’m alive today
@metamechanic9369
5 ай бұрын
Glad to hear you are alive!
thanks
Great help 👍
@metamechanic9369
5 ай бұрын
Glad to hear that!
@META Mechanic this video is being used by other KZread accounts but in fast forward. Those accounts are linked to the Amazon page containing the repair kit sold there. Someone is getting screwed out of credit due.
@metamechanic9369
Жыл бұрын
Thanks For the heads up.
@mykidsfuture5582
Жыл бұрын
@@metamechanic9369 I repaired 2 controllers using your video and was a god for a day in my daughters eyes. *THANK YOU!!*
THANK YOUUUUU!!!!!
thanks dude
@appilepie_
Жыл бұрын
the controllers broke 💀
I put mine back together and was having tracking issues not bad but noticeable , when I took it back apart the top right ribbon cable had come out or was never in properly , maybe when putting it back together I pulled on it ? But after replacing its 100%!
I followed the iFixit guide and numbered the screws per group and placed them in numbered pouches i made on the fly with stick-it notes.
@metamechanic9369
11 ай бұрын
Well done sir!
@KayoMichiels
11 ай бұрын
@@metamechanic9369 Yeah, but the placement of some of the screw made it very difficult to unscrew them.. good thing it doesn't have to be done regularly.. if only the thumbsticks were using hall effect sensors... like almost all other inputs use them... (like both triggers) but not the thumbsticks...
Suggestion: Cut out the parts where you're looking at the controller or doing minor cosmetic chages such as peeling the stickers and the goo and cleaning it up, it shortens the video and, atleast for me, makes it easier to follow because there's no break inbetween things so It's faster
@metamechanic9369
4 ай бұрын
Thanks for the comment.
Thanks for this, tho i watched the sped-up one of your video by some other guy but i will just go ahead and let this play too.
@metamechanic9369
11 ай бұрын
Glad it helped you out.
after i reassemble no led ? i think i'll check back the handle ribbon from the battery to the MB
@metamechanic9369
2 ай бұрын
I agree. Go back and check that everything is fully connected. Wish you the best of luck!!
This was amazing thank you but when I finished only one of my controls stoped the stick drift the right one will not move down when I pull it down is there a way I can fix that?
@metamechanic9369
14 күн бұрын
Hello, the best advice I can give is to start over from the beginning and see where you made the mistake. I wish you the best of luck
Thank you for the guides. I've replace my left controller joystick, but the new black joystick (original has white color) only last for 2 days, then it goes drift again 😭
@metamechanic9369
Жыл бұрын
Hate to hear that. Maybe you got a bad joystick. You could always try replacing it again and double check your work for possible loose connections. Good luck!
@lututane8156
Жыл бұрын
@@metamechanic9369 i bought 2, but both of them have the same problem. 😓 I bought it from Ali Express
49:43 чувак я делал секунда в секунду как ты и так же попался на это ))) ты застал меня в гнев 🤣🤣
@mechaindustries1773
Ай бұрын
Опа, свежачок. Получилось починить контроллер?
my joystick came out with the peg piece glued in. i used pliers to pull it out
Can you make a vid of how to fix a broken ring controller for your tracking.
This was my first time doing anything like this. I managed to fix my stick drift thankfully, but now I'm having a sensor issue where if I lift my thumb off the joystick, that will not be detected. If anyone knows the issue, please let me know! Other than that, great video! :)
@purpleplexed2953
9 ай бұрын
read @thekingacevedo 's comment think it'll help
i did it right and the middle of the joystick kinda sways to the left
Wish i was in your Area!
hey, your guide worked but now my grip button doesn’t register? what did i do wrong? an where to start with fixing? if possible
@metamechanic9369
Ай бұрын
Hello, the best advice I can give is to start over from the beginning and see where you made the mistake. I wish you the best of luck!
@ThisguyVR519
Ай бұрын
@@metamechanic9369 i fixed it, the black cord in your video disconnected when i put it back together my latch is broke off? i noticed that when i got into the first time but i put it back in an so far its been okay
I managed to fix the drift issue replacing the thumbstick, but now I have serious problems with tracking on the controller, any help?
@metamechanic9369
Жыл бұрын
I would suggest going back thru the controller and verify everything is properly installed and no connectors are loose. I wish you the best of luck!
I tried pulling off the second handle plate thing and the entire top pulled off and ripped the ribbon cable F my life ;(
@metamechanic9369
Жыл бұрын
Sorry to hear that. Wish you the best of luck.
@Goodgamer78
5 ай бұрын
Same. What did you do to get a new controller?
Thanks so much for the tutorial. Been looking to fix the controllers for a while. Though I do have some trouble with the cable at 32:35. I think the piece might be bent. Is there a way to fix it?
@metamechanic9369
Жыл бұрын
If you could find a replacement part you can attempt to replace it. However, that may be very difficult to locate. I wish you the best of luck!
@SonicPrimus
Жыл бұрын
@@metamechanic9369 Thanks for getting back to me. I am looking into getting a new controller outright in that case. But when I get to working on the right hand controller, I most likely won't be touching that cable if possible.
Can you ruin the cable for the thumb stick by scratching it because I connected it and there’s no response or I messed up the port
@metamechanic9369
11 ай бұрын
Unfortunately, yes. I wish you the best of luck.
You save me s2
generrrral kenobi!
I'm having tremendous problems getting the screw at 29:29, my trigger is oriented so it's OVER the screw, making it impossible to reach with either of the screwdrivers included in the kit.
@metamechanic9369
5 ай бұрын
I can tell that I was struggling with that also. You will have to go in at an angle and try not to strip the little screw out. The shaft of the driver is too big to clear the trigger switch. I don't know if you have the same driver I do but, if you do it will come out. If it's different you made to try and find a driver with a longer thinner shaft. I wish you the best of luck!
@ooglybooglyman
4 ай бұрын
i done diddly done it
Bro, the top like, circle thing on my joystick broke off of the joystick and I've been trying to figure out how the hell it did that lmao
@metamechanic9369
11 ай бұрын
Hate to hear that. Wish you the best of luck!
You mind if I link your vid on my channel in the description with all my gear ?
@metamechanic9369
11 ай бұрын
Thats cool! Thanks!
I installed an anolog on my left controller but right is up and left is down is all messed up what do i do
@metamechanic9369
Жыл бұрын
META Mechanic Unfortunately, the best advice I can give is to go back thru the controller and look for any loose connections. Hope this helps. Best of luck to you!!
31:50 HUUUMMMM ksksksksks lol
Just Tory contact cleaner in it thats what worked for me
Im at a loss, there is a single screw in my right controller that is just impossible to unscrew, its under the black controller cap close to the b button, i just cant get it out
@metamechanic9369
8 ай бұрын
If you can tell me at what time in my video I remove the screw you are having trouble with I might be able to give you some advice. Best of luck to you!
Clueless man simulator 😂. It was still helpful though. Thank you!
@metamechanic9369
5 ай бұрын
Glad it helped.
Can someone explain how he got under the trigger button to remove the screw? 29:55
@metamechanic9369
14 күн бұрын
It can be difficult to get that screw out. It is at an awkward angle. If you have the same tools that I have that came with the kit it will come out. Just keep trying. Do your best not to strip it out or break anything. I wish you the best of luck!
yo if anyone sees this comment and knows the answer please do tell, my left oculus quest 2 controller has this weird thing when I move my joystick in a certain direction (like mostly forward and left) it doesn't respond very well and kinda ends up with this glitchy movement in my games. It's just like holding down a button but the game/console sees it as you repeatedly tapping the button. If you know a fix please tell me because I don't want to end up buying a new controller.
@davidperdan8401
Жыл бұрын
That's called stick drift, and it's why I came to this video to find it. I did what another comment suggested and it worked fine (took like 5 minutes). Just follow what he does to take out the battery, the top black lid, and the top of the joystick. Take some "3-in-1 oil" (I used the WD40 brand of it) and drop 2-3 drops right on the black nub where the joystick was and wait for it to drip into the controller. Then, twist the joystick top back on, put the black plate back on, and turn it on. I had to repeat the above twice, (first I did 2 drops of oil, then I did 4 drops of oil) but then the drift completely stopped. Hope that helps
Do you need glove to do that
@metamechanic9369
11 ай бұрын
No you do not.
Broke mine trying to get the side piece off. That might all nice when new but after a few years that thing is not coming apart easily...
@metamechanic9369
9 ай бұрын
Hate to hear that! The one I repaired in the video was less than a year old if my memory is correct. At least you tried! Best of luck to you!
@jetstreamsam8179
7 ай бұрын
i had one of the same age, and it also sustained some damage. i still managed to fix it though, the key was getting out all the screws.
The screw under the top trigger won't unscrew (next to the barcode thing) and I'm scared I'll break the trigger, any advice?
@metamechanic9369
7 ай бұрын
If you can tell me at what time in the video I remove the screw you are having trouble with I might be able to give you some advice.
@rossraccoon1379
7 ай бұрын
@@metamechanic9369 I was finally able to get it after a few moments, sorry
It works put blood and swet into in for 5 hours now I have to do the second controller also forgot to put the screws back on the first one but looks fine
So im having an issue, i did the fix, but now my controller doesnt sense my finger on the top grip, for example; when i try to give a thumbs up in vrchat, i just point fingerguns, please help
@metamechanic9369
Жыл бұрын
Unfortunately, the best advice I can give is to go back thru the controller and look for any loose connections. Hope this helps. Best of luck to you!!
@baddoggo8567
Жыл бұрын
@@metamechanic9369 thanks
I did all of this but once I went to put it back together my grip button is not in place and the cover no longer fits please help
@metamechanic9369
8 ай бұрын
Unfortunately, the best advice I can give is to take it apart again as you watch the video and see where you made a mistake. I wish you the best of luck!
@lreycaleb412
8 ай бұрын
@@metamechanic9369 I fixed it thank youu
Mine won’t go in reverse after replacing
@metamechanic9369
14 күн бұрын
Hello, the best advice I can give is to start over from the beginning and see where you made the mistake. I wish you the best of luck!
(How i fixed mine)both joysticks started drifting on day 3, brand new. One was drifting up,the other down, theyre the same piece flipped over so must be a bad batch of joysticks. I opened the black top,removed the joystick cap and dripped a few drops of 3in1 oil(by wd40) into the moving mechanisms, had the calibrator on screen and saw each one getting fixed in real time after moving the joysticks for the oil to work inside, same batteries, never dropped or hit. Month 2 now, no more drift again
@davidperdan8401
Жыл бұрын
This comment specifically saved me from taking apart my controller even further. Took maybe 5 minutes and worked like a charm. Note to those who try but are afraid of getting too much oil: I did it twice: once I used two drops, tried it (no difference), took it apart again and did 4 more drops, then put it all together again and moved the thumbstick around several times in the calibration menu. Worked like a charm
how do I fix my A button issue because A button is not turn on
@Slakass55
9 ай бұрын
That's a common problem on video game consoles. My kids are pros at spilling sugary drinks and foods all over their controllers. I recommend adding a few drops of alcohol into the sides of the button and gently brushing around it a few times with a toothbrush, going around in order to clean whatever is obstructing contact. Or another type of brush (preferably with longer bristles and soft). You likely got food or a drink spilled there, or some other debris. Ensure you remove the battery first!
Hi there do you know where I can buy the ribbon connector that is soldered to the motherboard? I thought I was super careful but it fell off the motherboard like dust and now it’s toast. Oh also the reason I’m panicked is I went to let my nieces use it but discovered the battery leaked and I was cleaning it. I wouldn’t be rushed to fix the cable but they are here from Israel and I’m trying to keep them entertained. I’m in Dartmouth NS Canada and everything takes so long to ship. great videos by the way :)
@metamechanic9369
8 ай бұрын
Unfortunately, I do not believe that cable is available separately. Wish you the best of luck!
@fiona9912
8 ай бұрын
@@metamechanic9369 thanks for responding I appreciate it
this is about to be a hell of a journey, im gonna update with results. wish me luck fellas. update: LETS FUCKING GOOOOOOOOOOOOOOOO
@metamechanic9369
7 ай бұрын
You got this!!!!!!!!!
@jetstreamsam8179
7 ай бұрын
@@metamechanic9369 i have to say thank you. your video made it so i didnt go into debt, and while hiccups happened, they were my fault. i fixed it because of you. thank you man, thank you.
Thanks for making me break my controller
@metamechanic9369
8 ай бұрын
It was already broken if you tried to fix it but, at least you tried. Best of luck to you!
@SunlightGregory
8 ай бұрын
@@metamechanic9369 eh it’s fine and I ended up not breaking it
ma manette droit Oculus quest 1 marche un moment et s'arrête rest 2 jour et redemar après rebelote même problème
Wow i cant believe someone literally just re uploaded this. Sorry man. Maybe voice or some watermarks are going to be a standard these days unfortunately.
Hello could I possibly send in one of my controllers
@metamechanic9369
Жыл бұрын
No sorry I do not offer repair services. Best of luck to you!
You fix my Oculus controller
Ha ha, I saw you struggling to place the joystick in place. Just to be honest. How much would you charge for doing this fix? Seems to me that 20€ for the spare parts plus whatever you get for the hour is not that far from buying a new one. Don't get me wrong, I'm for doing it my self too but hell.... they build this things with evil in mind.
@metamechanic9369
10 ай бұрын
Thanks for the view and comment. I do not repair these controllers for people. I just wanted to see if I could repair my son's controller for him. Have a good one!
Is this hard or easy to do?
@metamechanic9369
14 күн бұрын
That all depends on your mechanical abilities. I would say give it shot. Your controller already doesn't function properly so nothing to lose really.
A chip of my thumbstick broke off it’s been very annoying
@ooglybooglyman
5 ай бұрын
Whole thing broke off for the original for me, that's why I replaced it. That and the stick drift.
Why are you wearing rubber gloves?
@metamechanic9369
3 ай бұрын
I'm an automotive mechanic and my hands are in bad shape. Trying to save you from having to look at them.
Mine is not turning on with new battery
@metamechanic9369
5 ай бұрын
Try another new battery and also make sure the battery is in the correct way. Wish you the best of luck!
@LubaLuba1
5 ай бұрын
@@metamechanic9369 the battery gets pretty warm is there a way to trouble shoot this to find out if there's a short?
@metamechanic9369
5 ай бұрын
@@LubaLuba1 That definitely sounds like the controller has an internal short if the battery is getting warm and the controller wont power on. I would suggest removing the battery and getting a new controller.
@LubaLuba1
5 ай бұрын
@@metamechanic9369 do you know where I can get one inexpensively or repair
I got a cheaper set and the screwdriver they provided is nice and has many heads but was too long and so I am stuck
@metamechanic9369
Жыл бұрын
Sorry to hear that. Try locating a screwdriver that will fit you needs. Wish you the best of luck.
Are the gloves optional? Lol
@metamechanic9369
Жыл бұрын
LOL. Absolutely.! I'm an automotive mechanic and my hands are in bad shape. Trying to save you from having to look at them.
@mykidsfuture5582
Жыл бұрын
@@metamechanic9369 I wore the gloves because it psychologically made me more careful. I went from steel worker to surgeon with a nitrile snap to the wrist.
Didnt work at all controller busted. Have fun.
Did this work
@metamechanic9369
Жыл бұрын
Yes and have had no problems with it.
@SurfaceINK13
Жыл бұрын
Sweet I ordered a set of replacements yesterday should be fixed today EDIT: dawg they work so well I didn’t know vr could feel this good thanks for the tips
@luisclark3693
Жыл бұрын
I got a replacement kit off Amazon but it seems that the two screws that are slanted at the front of the controller are in too tight and I can’t get them out. How would I loosen them enough to be able to get them out
@metamechanic9369
Жыл бұрын
@@luisclark3693 I do not recall any of the screws being very tight. However, some of them can be a bit tricky getting out because of the ring around the controller. Making it difficult to get the screwdriver on the screws. If you can tell me at what time in the video I removed the screws you are talking about I might be able to give you more advice. Good luck to you.
@ethantato
Жыл бұрын
@@metamechanic9369 I see his issue, at 10:40 But for me, my screwdriver is just far too large. Just annoying design, is all.
Didn’t work, had to buy a new controller for 129.99. Wow, thanks man.
@metamechanic9369
6 ай бұрын
Sorry to hear that! At least you tried.
Do you need glove to do that
@metamechanic9369
11 ай бұрын
No you do not.
Do you need glove to do that
@metamechanic9369
11 ай бұрын
No you do not.