OBS Solutions Offroad Eddie Bronco is DONE!
Автокөліктер мен көлік құралдары
We just finished up our 1994 Ford Bronco project we like to call "Offroad Eddie"! We picked this bone-stock Bronco up a few months back and set to work to create the ultimate off-road rig for here in the beautiful Pacific Northwest. We teamed up with Desolate Motorsports and installed their 6" Suspension System that included cut and turned Dana 44 TTB Beams up front, Deaver springs all-around, Bilstein shocks, and heavy duty radius arms. We also installed their truss for the 8.8 rear axle, rear sway bar setup, fuel tank skid plate, rear bumper and quick-disconnect steering wheel setup. We kept the drivetrain mostly stock, the 351W was removed for some maintenance and mild upgrades as well as service work on the E4OD transmission. Under the hood we also whipped up a mounting plate for our ARB Air compressor...be on the look-out for this product soon! We regeared the axles to 4.56 and installed lcokers on both ends with parts from the folks at East Coast Gear Supply. We picked-up a set of 17x10 KMC Machete Beadlocks and had them stripped, sanded and polished by McVeys Mobil Polishing and then wrapped them in 35x12.50 Falken Wildpeak MT tires. Did you notice the center caps? We had custom adapters machined to allow us to use the original Ford center caps on the KMC wheels, keeping some OG style in the mix. Wild Horses Broncos supplied the DIY front bumper, we filled it with a Warn VR 12k winch and topped it with a pair of KC LED Daylighters. Most of the original interior was in great shape when we bought the Bronco. We added a new carpet kit from ACC and sent the front buckets out to ENOS Upholstery for some custom rehab work. Matt and his team installed custom stitched leather covers and added seat heaters for us to make things a bit more comfy in the cockpit. We also added a bunch of our own OBS Solutions products to this project. You can find our Aluminum Sill and Scuff Plates in the door jams, our Aluminum Tailgate Panel with color-matched stripe, rear-defrost relocation bracket, and custom switch mounts inside the center console.
We're stoked on how this project turned out, it drives incredible, sounds awesome and you can't miss those unique Eddie Bauer colors when we go cruising by. Now its time to put on some miles and adventures with this rad Bronco! Where would you take it?
Thanks to Desolate Motorsports, Warn Industries, Complete Performance, McVeys Mobile Polishing, East Coast Gear, KMC Wheels, Falken Tires, Crabtree Automotive, Wild Horses Bronco's and our amazing team for helping put this rig together!
#obssolutions #obsford #offroadeddie #gofastbroncos #desolatemotorsports #warnindustries #wildhorses4x4 #eastcoastgearandsupply #kmcwheels #falkentires #cpaddict #mcveysmobilepolishing
Пікірлер: 51
I am refreshing a 1986 Eddie Bronco. Thanks for the great ideas
This might be my favorite Bronco in the world.
@haydenbriggs
4 ай бұрын
It's between this Bronco and this one, for me. Both are amazing in their own ways. kzread.info/dash/bejne/ZYWFo9ZulbOXnrg.htmlsi=kQgFLSCC82XFgdrn
Nice to see you went with Desolate motorsports cut n turned beams instead of just crappy rough country drop brackets
Amazing built guys 😎💪🏼👍🏼
DAMN. That is a tastefully done Bronco!! I LOVE it!
Awesome, that came out very tasteful, not to over done, great job. Best looking bumpers I have seen.
That turned out super nice
You knocked this out of the park!!!!
That truck turned out amazing.
Love those center caps on the aftermarket wheels!!
Honestly looks super good
Great Job, Look Good !!
Cool Bronco 😎 Hope you guys get more into those, so you can leave at least a few of the nice F-Series trucks on the market for us plebs to buy. You guys snatch up all the nice ones!
Very Nice Truck
This is badass
Love the bumpers, that’s something I’d like for my ‘94,Bronco looks amazing,good job. I’m in southern Oregon, where are you guys located?
+1 on the where did you send the seats. Have redone interior of my 1996 Eddie Bauer... Need seats redone
this marine has a 96 ford bronco xlt 5.8 liter i would kill to afford to fix it up especially suspension and bumpers winch outta my budget unfortunately i wish.
I have the same bronco
Have a 96 XLT I'm bout ready to start upgrading. What kind of budget were you working with on this project?
What did you use to paint the frame and axles? looks great
Goals for my bronco. Currently have the stage 1 from desolate. Question. Is it an even 6 inches all around ?
Info on the center console and light bracket install and functionality for switches?
Great, how did you got your doorpanels that clean, are they new?
Where did you get the filler piece that goes in the gap between the bumper and tailgate?
where did the replacement seat covers come from?
Does anyone reproduce the rear panels cards and trims? Or just door cards?
What did you do for cruise control?
Do y’all sell those center cap adapters?
What wiper switch pillar is that??
what is that color called , my friend has it on his truk too
What kind of springs are they?
I'll trade my much newer '16 land rover for this baby with no hesitation. No really let me know if you want it lol, mine does have the full locking 4x4 unlike all the other mall runners.
Is there a reason why you guys kept the stock steering linkage setup?
@obssolutions1466
Жыл бұрын
It works well for our intents and purposes. Swing steering is a great upgrade that we may look at in the future, but for now, we're good with it.
@bearfoot25
10 ай бұрын
That Stock steering is plenty strong enough unless you are really going to thrash it hard in some rocks. Ive got a 6 inch lift on mine and all i did was flip the tie rods to the top of the knuckle to get better geometry.
👏🏻👏🏻😂😁👍🏻
How much would a work over like this cost in total?
@obssolutions1466
3 ай бұрын
All of our shop work is quoted via phone conversation with our shop manager. Send us an email at services@obssolutions.net with your info to start that process.
Can you link to the headlights? I bought some clears off amazon (I know..) and they don't color match, seriously annoying.
@obssolutions1466
Жыл бұрын
Contact CP Addict
@C5chief2003
Жыл бұрын
@@obssolutions1466 Score, thanks! And I love everything about the Bronco, keep doing awesome things!
The steering wheel just ruins it
Looks like you forgot to install half the lift kit
@iansteward4708
Жыл бұрын
Na they got it all.
that front axle is odd
@trashman1694
Жыл бұрын
A lot of people hate the ford twin traction beam d44 stuff but if you want to go fast in the desert it works amazing. If you're just going to drive through mud/rock climb stuff better to just SAS swap it
hOW HAS THE REAR SPARE HELD UP. i AM NOT SURE THE STOCK HOLDER WILL HILD UP OFFF ROAD. i HAVE A 4"CUT & TURNED LONG CHROMOLY RADIUS ARMS BIG STAINLESS HEIM JOINT MOUNTS RESR FRSME TO FRAME REAR TOWER A LITTL FOWRWARD RUNNING dEAVERS A 4LINK IS NOT AS GREAT WITH THE WHEELBASE ON A bRONCO AND i WOULD NEED TO TUB IN THE BACK AND LOOSE INTERIOR SPACE TOO ON KING SHOCKS LOTS OF WHEEL TRAVEL WARN WINCH AND A NEWER FRONT END THAN THE bULLNOSE. a BUILT DRIVETRAIN AND INT BALANCED ENGINE GEARS & LOCKERS LIGHTS AND HID UPGRADE IS NICEgOOD STEREO SOUND VERY GOOD NOT HUGE WATTS BULD BY rms
The rear quarter and the spare tire mount won't last a good off road trip. I have an 1989 a bought new distroyed over 20 years and am planning on rebuilding.
@obssolutions1466
10 ай бұрын
The rear bumper has a kick out tube that the spare sets on to help carry the weight. So far, no problems.