OBS Chevy Gets 20 Year Update In 10 Minutes! Texas Speed Shop Truck!
Автокөліктер мен көлік құралдары
We compacted all the Shop Truck build footage into one time lapse clip! This covers a lot of work and time that have gone into this truck to get it to the point it is at now! Looking forward I can see a lot of shredding in this trucks future! Thanks for stopping by the Texas Speed Channel! If you enjoyed the video please like, subscribe, and share with your friends!
As always....
Sit back, Enjoy, and let us know what you think in the comments!
Check Us Out And Follow Us On....
www.texas-speed.com/
/ texasspeed
/ texasspeedandperformance
TexasSpeed?lang=en
Snapchat - texas-speed
TikTok - @Texas_Speed
Пікірлер: 173
That is a RAD truck. LT swaps are definitely going to be the next big thing.
@jacknelson9440
3 жыл бұрын
Gotta stock up on l83s while they're still cheap
@anthonybonnelle786
3 жыл бұрын
They've been a big thing a for years
@amigostowingllc7446
3 жыл бұрын
What is a lt swap
@jacobengen5339
2 жыл бұрын
@@amigostowingllc7446 LT is the next gen of LS I’m pretty sure
That blue is the biz! ❤
I wish I had the money to do half of that to my truck
@DL-dj9mn
3 жыл бұрын
Wow bro you are an inspiration don’t give up. I have more hope than I have money it’s just some time a big let down when I see videos like this one knowing I can’t do anything like that
@thomasontiveros
3 жыл бұрын
@Jeremy Garza keep it up bro. youre doing great
@shaneriley9244
Жыл бұрын
Same boss same.
@raulalcazar4325
Жыл бұрын
I have the same truck same motor just missing the money to put it all together as well smh we’ll get it done one day bud just gotta work harder !
@shawnc757
Жыл бұрын
Same here bud. In due time.
Really like this truck! Not overdone and great stance. Can't wait to see future mods.
Absolutely beautiful build guys. Very very clean OBS C1500. 👍🏻👍🏻
That’s how I want my 95 to look when it’s done. That stance is perfect! I’ll be happy with an LM7 in mine soon enough.
Nice setup. I see you're going through drum brake tribulations. Little Shop MFG makes nice rear disc brakes for these things. The Wilwood D154 caliper is the one you want. You can get crazy race pads for those calipers, or ho-hum street ones. Since it's a 11.6" disc, it'll fit inside a 15" beadlock. I have the same setup on mine, and it transformed the feel of the brakes. Plus, I ditched the ABS and got a 1" Wilwood master with a bias valve. More room under the hood for a pair of 58's. A full floating axle would be a game changer, but I like the light weight of the QA1 torque arm and the 10 bolt diff as a fun street truck.
Very very clean and tastefully built truck. 👍👍
I’d love to know what it costs to do a total overhaul like this.. I’ve been wanting to do it to my 92 for years.
Man I love this truck. Dream truck.
Everything I wish I could do to my obs yall just did it in 10 minutes on this video
So clean, so perfect
I like everything about this truck 🔥
you guys do such great work and show many companies what QUALITY and TEAMWORK really looks like, cheers bros!!!
@gerardolopez5875
3 жыл бұрын
@@TexasSpeedPerformance @ its this a customer truck?
Mannn i love this fully detailed video 🔥🔥🇲🇽🤙🏾
I dig it. I got a 2door Tahoe, 2wd for you guys to work on next. Lol
79👍's up guys thanks again for taking us all along with you for the great show 😊
@bigredracer7848
3 жыл бұрын
@@TexasSpeedPerformance your very welcome ☺️
Very clean truck! Nice job! Too nice for a work truck, but you guys are ballers.
Damn that's a beautiful truck!!
i wish my truck was that nice
Well done good sir
I've been holding out for a LY6/4L80 combo from a 2500 Express Van for my next swap.
Nice build
If I had the dough, I would have y'all build me an OBS like that. MAAAAAAAN
@WhiteGravey
2 жыл бұрын
or you can just learn how to work on stuff and take pride in what you can build instead of buy. a blind man with a hammer can work on these trucks.
Bad ass obs mamalona!!
I want an obs now
Really nice work. Is that where they shot Back to the Future. It looks just like it.
These swaps are gonna catch quick alright....get ready for the eye poking coming soon to your local Facebook market pages....👀✌😂
LOVE THIS OBS! Love clean builds like this. These look soo much better without "donk" style wheels. Simple and classy.
@jordanbonner6701
3 жыл бұрын
whats ''donk''style wheels huh
@radomark408
3 жыл бұрын
@@jordanbonner6701 big rims rubber band tires. No offense if that's your style.. Everybody has a preference.
Man wish you guy would’ve done a video on the harness it’s really need out here in the KZread streets
@J2A61
3 жыл бұрын
Texas Speed & Performance I mean a meaningful how to video...... informative step by step, stand alone ect... there is none on KZread for genV....
Wanted to find out what the rims and tires size and drop for the original. Also the size and drop for after you guys worked on it.
Let’s go
Sick build. Love to see this one done on a build up. Not a time lapse. Whose suspension is that
Curious. Why did you guys relocate the battery? Space? Weight distribution? Thinking about doing this on my NBS stepside as weight is very unevenly distributed. Thanks! Cool video!
That's nasty and I love it she's mint wish I had the money to do that to my 94
this is nice ! i wonder what kind of mpg these trucks could get swapping in one of those 4 cylinder turbo lt engines with the 10 speed for daily driving awsome work
@NightshiftCustom
3 жыл бұрын
they get good mpg stock so would be alot better with the LS swap!!
Wow 🤤
Would really appreciate it god bless everyone 🙌🏻🙌🏻
@Texas Speed, what did you do with the old engine?
I know this is a off the subject question, but what head unit did u put in this truck? I like the looks of it
The most inport bart was showing wireing harness mods... pls post video on it
Texas Speed & Performance is there a way to get a list of all the parts you guys used for the swap? I’m planning on doing a swap on my 93 obs.
@eazystreet1343
3 жыл бұрын
👀
Si quema cuh😈🥵👍🏻
I’ve GOT to know the exhaust setup please :3 Headers, midpipes, mufflers, I’m so particular with sound and this is heaven
Que chulada de troka
What are y’all going to do with the old engine and wire harness
I have a L83/6L80 in my 14 silverado what cam do you recommend for a daily na build
Would love to know the suspension parts used
What wiring harness did you guys use want to put a new motor and trans in my 94
Very nice. Any interest in upgrading my '92?
How did you get the stock drive shaft to work with the 6l80?
Did you have to change the oil pan?
Can y’all post a parts list as well as a pin out for the harness used in this truck?
@williamsb6748
3 жыл бұрын
I was wonder the same but I watch all the videos and make my list 😆
Some dyno numbers would be nice
How you manage to shift the 6l80e?(manually)
Would like to see performance mods so I can do the same mods on my l83 :)
@texasspeed what did you paint frame with??
my question is what did yall do for gauges
So you don’t need to delete the afm or vvt to get these to run well when swapping?
What was that big thing in the back with the cables behind the diff?
Nice truck. I'm interested on a 454 for my 98 GMC c1500. How can I go about your praise. Thanx
Did you guys run the same radiator it had
How did you guys fit in a double din?
The intake you took off what truck was it from ??
What accessory drive ?
Hey @TexasSpeed&Performance if I want to do this to my truck there, how much would it cost.
Is this truck leveled
What’s the radio name looks clean
Do you guys have any engineers working for y’all? I’m currently in school and wondering if ya offer any internships.
First project should be a VVT cam dialed in perfectly, headers and exhaust with a ported LT4 blower. Now that the truck is running you should swap in a 10 speed auto 2600 stall or Tremec 6060 and 3.42 or 3.73 gears. That blue on the truck is gorgeous by the way. Maybe a 1/2" spacer on the wheels so they don't sit in quite so bad.
@chesspiece81
3 жыл бұрын
@@TexasSpeedPerformance please do it 🙏
@chesspiece81
3 жыл бұрын
@Little Timmy I've got some other things I'm working on but I don't record anything.
I got a 2018 5.3 and 8l80. I want to put in a obs like more info on how to delete the electronic steering and how to use stock power steering
@chikisorozco4297
3 жыл бұрын
I hardly see replies from texas speed
How much for the wheels and tires?
Okay this is a weird question but I'm sure everybody knows the answer to but I'm new to the mechanic side of automotive hobby I'm a painter if I buy a turnkey motor from Texas performance speed is my car then not legal to register is it only able to be used on Racetrack?
What rear end suspension kit did they use?
What ac mount is that?
Why no cam or boost tho?
Now it's time for an lt4 blower and a cam swap
Is it for sale?
I have a 98 how did you over come to tie in the direct injection??
How much to swap 5.7 to LS3 in 1995 chevy c1500 if someone has the engine and harness
was that the factory engin harness yall was moding ???????????????????
What’s the Exhaust setup???????
I want a diesel swap done on my 3500 obs.
What was the total cost
how much would you want for it ??
would somebody please tell me what OBS stands for???
APPROVED=✅ 🦅 🤟 ☝ 😎 👍 👌 🤘 ...................😷
What do y’all charge to do that to a 1994 c1500 stepside.
What exhaust is that
How much does somthing like this cost
So the 6l80 magically disconnected from the L83?
Could you post the steps of the wiring for computer please
HOW MUCH SOMWTHING LIKE THIS MIGHT COST BUT FOR A 4WD.... I GOT A 1995 Z71.... NO SUSPENCION
I love the shop truck
How much would this costs? I have a 92 step side Mark/// with 153k on the clock. Truck still runs great but needs a paint job now. I don't know what it was about the paint/clearcoat from those days. Mine was very well cared for, but it still happened with the peeling..
@nonameisthename138
3 жыл бұрын
@@TexasSpeedPerformance That sucks..🤦♂️🤷♂️
@SH-fr2xm
9 ай бұрын
EPA made car manufacturers around those years change up their painting process or something along those lines. Took them a while to figure it all out
My dream job! Too bad I'm only qualified To work on JUNK!
How much does that cost?
I love this truck but I really wish ya would’ve put a 6 speed manual in it. In the process of doing the same swap but with a 6 speed lol
@danielalvarez6193
3 жыл бұрын
Please do!!! It would be so helpful. There isn’t much content on these motors with a manual besides forums but even at that there’s a lot of digging around that you have to do. 🤦🏻♂️
@NightshiftCustom
3 жыл бұрын
@@danielalvarez6193 theres lots of info on manual trans on a LS its nothing new at all
@Dr_Xyzt
3 жыл бұрын
If TSP does a manual swap, I'll drive to Austin and race them around COTA.
Not sure why I never to see a faster video of everything I have watched 🤦♂️
Can we get a parts list?