They tuck fine on my bagged obs!!!🤷🏽‍♂️

Years ago I made one work by just shorting the axle tubes . Unless you absolutely love the wheels don’t advise . Shit ton of work and a few trashed cut parts that wouldn’t fit . But it still rolls around NJ to this day somewhere up there

Im going 22s with low profile im taking a gamble wish me luck!!!!what tire is the skinniest i can get????

How can you end it without a full body shot with the wheels! 😂

I’m planning on a set of 20 x 8 set of those exact wheels on my 03 S10

@365hotfire

5 ай бұрын

What’s the name of those wheels?

@CarportCustoms

5 ай бұрын

US Mags Bullet in gunmetal

@365hotfire

5 ай бұрын

@@CarportCustoms thank you

@briankissel7661

5 ай бұрын

But an ‘03 S10 is worth less than the wheel set you’re considering.

open eyes vide 👏

22x10.5” will tuck. Check out my videos of my obs.

So that fitment would work fine bagged on a regular shortbox. Gotcha

@CarportCustoms

Жыл бұрын

Yea with a lil work

i got the same wheels but in 10.5 inch i believe but i only paid 1685

I'm wanting to run the torque thrust 2s 22x9 22x11 265 30 up front 295 30 in the back 4 7 drop will it clear or need to be trimmed an rolled a lot? And am I going to run into problems wanting to drive it a lot? It's also a step side.

@CarportCustoms

Ай бұрын

We had to trim the lips in the rear and front on these. So I’m sure you will have to do the same

If bagged what size u recommend for no axle shortning but its body dropped 1993 chevrolet suburban lays frame but 8 dont know what rims to get

@CarportCustoms

Жыл бұрын

just need to make sure the offset and backspacing is right

DAMN THERE NICE TOO 😍

Nice 👍👍🇲🇽🇲🇽

It used 2 have 22s and they fit perfectly and layed frame but i cant remember the dimensions of tire or wheel size

@CarportCustoms

Жыл бұрын

our tire height will lay frame. its the offset and width of the wheels that are the problem

I have 15" stock steelis, and now it rubbed the back airbag and popped it twice, in the same month i dont know wats wrong tires are 275/50/15 so they are pretty thick tires.any suggestions??

@trev119

10 ай бұрын

Man that looks so freaking ugly idk why anyone would want that garbage on any vehicle much less a truck.

So use a regular bud I Sean so many step sides not Abel to lay frame

@CarportCustoms

Жыл бұрын

You can lay out a stepside just as ez. the width of both beds at the wheels are the same. but if your wheels are to tall you will have to raise the fenders on the stepside

What size are the rear tires on those? 295?

@CarportCustoms

6 ай бұрын

295/30 on the rear

Iv always been confused why they call this a OBS I have a 83 C10 and Iv never understood the " old body style" saying. Can someone educate me on this

@djkingpinlive

9 ай бұрын

Sure. The 88-98 trucks were an updated to a whole different platform from the c-10 you have. Your truck was the last c-10. Then, in 99, when Chevy updated the sheet metal again, everyone in the truck game started calling them “new body style” or NBS. So anything before 99 was called an “old body style” or OBS. When they updated them again in 2007, they started calling those “new new body style”, or NNBS. Which is sorta silly haha But the OBS name stuck.

@djkingpinlive

9 ай бұрын

The 88-98 trucks really started the truck customizing craze, so those style trucks where the “starting point” for the whole truck game.

The airbag sits pretty close to were you weld yours in the rear on the brown obs truk u build on ur vids i watched everyone trying to figure out my issue please help

@CarportCustoms

11 ай бұрын

Seems to me the wheels and tires are too wide. Send me a pic

@puffintrukin4900

11 ай бұрын

Ok were could i send u a pik would gladly love ur help and wisdom

@CarportCustoms

11 ай бұрын

Look us up on Facebook

I have the same shirt i work for Performance Contractors Inc.

Would that be the same clearance as a fleet side im looking at ordering the same wheels for my obs 4/8 drop

@CarportCustoms

Жыл бұрын

yes

@freshbutplain1144

Жыл бұрын

Thanks for the information

Shorten differential

C notched?

@CarportCustoms

Жыл бұрын

Under bed cnotch

295/30 or 295/25 which will look better?

@el_famoso_randy3648

4 ай бұрын

And what tire size are the front?

@el_famoso_randy3648

4 ай бұрын

Thinking about getting 245/30 in the front

What's the tire size on the rear?

@CarportCustoms

10 ай бұрын

295/30

@briankissel7661

5 ай бұрын

Who cares?

@cody_capps

5 ай бұрын

@@briankissel7661 maybe someone running a 22x11 on the rear of a lowered obs? Just a guess.

What “old body style” is that.

As the wheel goes up it goes in so it would clear.

@CarportCustoms

7 ай бұрын

No sir no negative camber here

Card carrying member of the Amish lowrider community

@CarportCustoms

5 ай бұрын

Shoot I started the Amish Low Low Club

Lmao dude said "its on a static drop 4/6"🤣 far from static my guy

@CarportCustoms

Жыл бұрын

Any drop not done with hydros or air is a static drop.

First question should be why do I have a stepside?

@CarportCustoms

5 ай бұрын

Because they are the sexiest

@briankissel7661

5 ай бұрын

So you can step on the sides, duh!

@CarportCustoms

5 ай бұрын

right lol

I seriously don't understand KZread, i hate trucks that are low like that. And no i don't go out of my way to hate on them, thats your choice to like them and im not gonna interfere. I will admit it looks nice but i prefer functionality over form. I havent even searched rims or tires or even suspension so im at a loss

IMO lowering trucks is one of the stupidest things ever.

@CarportCustoms

Жыл бұрын

Well that’s your opinion, glade we do what the customer wants at Carport Customs.

Freakin clown car wheels. Anything over 18" is out of proportion on that truck.

@CarportCustoms

Жыл бұрын

We always down to clown

@bandit3442

10 ай бұрын

Thats just boring

Ruin a good truck

@CarportCustoms

10 ай бұрын

Please explain how it is ruined

@briankissel7661

5 ай бұрын

@@CarportCustoms because it can no longer be used as a truck.

No more rim than tire means you aint doing truck things just get the fucking Cadillac