I have an ODB11 on the way and was a bit unsure about long coding. You just took the worry out of that. Thanks m8!

@zigmatronik

7 жыл бұрын

No problem :) Did you get the pro version ?

@jesperscheel-bech998

7 жыл бұрын

Yes, I got the Pro code so I can long code

@zigmatronik

7 жыл бұрын

Good. What are are you going to code with it. If you dont mind me asking you.

@jesperscheel-bech998

7 жыл бұрын

Not at all :-) So far I will be coding the following for my wifes VW Golf Mk7: Auto Rain Closing Disable Door Open/Ignition Tone Short Alarm honk on Arm Disable Seatbelt Warning Needle Sweep Refuel Quantity DRLs stay on with turn signals Four (Five) Brake Lights I was hoping to active start/stop memory, but I haven't been able to find any such coding. But I'm compiling a list for my VW Passat B8.. :-)

@zigmatronik

7 жыл бұрын

Cool. Are you using the provided pre-set code or manual coding ?

Stoked to get this for my RS4 and B6 A4

@zigmatronik

6 жыл бұрын

Awesome. is the RS4 B6 or B7 ?

@my_RS4

6 жыл бұрын

ZigmaTronik B7 RS4

Very educational video and you're easy to understand. Could you make a video testing live data for the engine on different groups measuring blocks etc? Or lead me in the right direction ?

@zigmatronik

6 жыл бұрын

Will do when I have the time. Thanks for the suggestion.

hey where do you find the codes and what/where everything should be set too??? i was hoping to figure this out as mine will be here tomorrow

I also have b6, I would love to see some hidden features...

skoda. the fourth one is a skoda. mine has a 1.8 tsi audi A4 engine in it :))

Awesome video, made my decision much easier to purchase Just out of curiosity, where did you find what numbers to change each code setting to? Is there a online resource that has all of the available mods, with the respected code changes?

@zigmatronik

7 жыл бұрын

here you go www.ross-tech.com/vag-com/cars/audiB6.html

@a.w.thompson4001

3 жыл бұрын

Works for both B6 and B7.

Video was very helpful. How did you know what numbers to change? Tryna do the windows by remote on Audi A6/4F

@zigmatronik

4 жыл бұрын

Some of them are slightly different compare to others. So as far as I know the B6/B7 use bits coding and the B8 and up use Long coding ( bytes )

Hey thanks for your wonderful video I’m having trouble with some LED taillights will this Device help rectifying the issue I’m having it’s not working with reverse lights blinkers or brake light I have an Audi A4 2008 Quattro the smaller lights which are the driving brake lights are working fine it’s the other modules on both sides that are working at all and I’m getting the warning codes on the dash as if they’re not even being recognized and the blinker blinks really fast could you could you please provide the code and instructions if you have them I would greatly appreciate it

@zigmatronik

6 жыл бұрын

Sorry for getting back to you so late. Since the taillight's are led with low wattage draw the computer freaks out. Sound like you need some load resistors or canbus complaint bulbs.

Hello. I have A4 B6 and my OBD just arrived. I have problem with adaptive lights and I am not sure about my code. Can you tell me what is your code in coding (headlight regulation)? Mine is 00020 and I am not sure if this is right code in there. I am not able to do output test...

Do you think this is just as good as VCDS? If money is not an option for you, which would you get? I am trying to decide between the two. Are there more functionalities with OBDEleven? Does OBDElven list part numbers of defective parts like VCDS does?. Can you use OBDEleven with unlimited cars/VINs unlike some VCDS tools? Thanks.

@zigmatronik

6 жыл бұрын

So far I thing that obdeleven is %100 worth the money. It will scan thought every module and will let you know if there is any problems. This product is meant for beginner's and enthusiast that are on a budget. Also as far as the amount of cars you can use it on wise I dont know if there is a limit. ( so far I have scanned and programmed 7 different cars and it has not given me any issues. ) So in conclusion it depends on you. Are you a beginner or enthusiast ?

Can you do a detailed review on the "cool" mods? Thanks :D

@zigmatronik

4 жыл бұрын

I would but that exact B7 the engine blew on it :/ Might be able to do something with the B6 i am driving now. Will see. Thanks for the comment :)

Where do you find a list of all the codes and what you can/ they do, especially for your specific car???

@zigmatronik

4 жыл бұрын

Look up model of your car in my case its ( B6/B7 a4 ) So I googled B6 A4 Rosstech VCDS codes

Great video! I just want to ask if you can enter EPB service mode using the obd11 in order to change the braking pads. I will appreciate your response.

@zigmatronik

6 жыл бұрын

Depends of the car you have. which one do you have ?

@michaelyounes579

6 жыл бұрын

Audi A6 2006

@zigmatronik

6 жыл бұрын

OBDEleven can do Basic settings and adaptations. I am not to familiar with C6 A6. But here is a video I found that can help you kzread.info/dash/bejne/rHqOrMxsaanAY9Y.html OBD eleven does have all the setting that vcds went through in the video ^. Let me know how it goes . Thanks.

@michaelyounes579

6 жыл бұрын

Thank you so much for the fast response and willing to help people out. The video you referred to is useful. Btw I have checked online and I found out that the obd11 does enable/disable electronic parking brake. I will purchase this sucker :D as soon as possible!

@zigmatronik

6 жыл бұрын

Glad I could some what help you out :)

Can you program a new key using this and also reset airbag light or would that be done using the VCDS? Btw Thanks for the vid man.

@zigmatronik

6 жыл бұрын

I don't think you can program a key with obdeleven. But I'm pretty sure you can reset the airbag light through the diagnosis.

@devigumpina

6 жыл бұрын

+ZigmaTronik I get epc and check engine light on when I put my key in. They go off when I start car. Can this tool help in reading the codes, I have 2013 Audi Q5. Please advise.

@zigmatronik

6 жыл бұрын

The tool will scan every module that your car has. You said that the light turns off when you turn on the car ? Does it in anyway effect the cars performance ?

@df.hutton7570

5 жыл бұрын

Not sure about Immobilizer...but Lock/Unlock can definitely be done!!!

Do you know how to activate the external sim for Audi Q7 2018 Canadian model? NB: external SIM card slot is in the glove compartment; it’s active on US models but not on Canadian.

@zigmatronik

5 жыл бұрын

I think you have to set your car to EU or US for that feature. I would do EU for the tac to read in km/h.

Thanks for the video. For some reason a lot of the control units aren't connecting. 01,02,03, and 15 work but not 46. Is there a trick to get it working? I tried turning the ignition to "On" and even starting the car.

@zigmatronik

5 жыл бұрын

Module 46 is under the footwell. Chances are it's dying because overtime water gets in it. Take the carpeting out dry it up and reconnect it.

Hello, Good Video! Do you also know how to disable the door chime when the door is open?

@zigmatronik

7 жыл бұрын

Glenn Uittenhove Sorry I dont know the code for it. I looked for a while and couldn't find it. If you know the code for it please let me know.

@zigmatronik

7 жыл бұрын

I found the code for door chime. I will put up a video soon with some other cool tricks.

@carlosrobertocastilloduart650

7 жыл бұрын

ZigmaTronik Thanks for your videos! Theyre really helpful

@zigmatronik

7 жыл бұрын

no problem

@zigmatronik

7 жыл бұрын

no problem. Glad I can help :)

Hi. Do you know if there is a way to code the car to have something similar to CH/ LH function for an B7 with Bi-xenon, DRL but no light sensor?

@zigmatronik

9 ай бұрын

yes you can use the same way to program with out the light sensor. It will just turn off DRL as a function.

Hi, my history shows a change on the B7 (Access start system interface) long code of 032C0C to 032C1C .... I didn’t do this change. Do you know what it’s for ?

@zigmatronik

4 жыл бұрын

No idea.

I would like to close windows and roof with a remote control in A4 B8 2011 format using OBDeleven. You will help

@zigmatronik

6 жыл бұрын

I have not coded any b8 a4 before but here is what I found. Looks like its very similar to the b7 but its long coding. [46 - Cent. Conv.] [Coding - 07] -> [Long Coding Helper] Byte 2 Bit 2 - Set to 1 Module 46 Coding Long Coding Byte 2 set bite 2 to 1. Let me know if that helps. If anything there is apps on OBDEleven that has presets ( that you have to use credits for ) for coding for b8 a4 ( its only 10 credits ).

I like this. What devices do I need for this?

@zigmatronik

3 жыл бұрын

Android is better for this but you can use iOS these days as well. Also the OBDeleven device. Thats all. I recommend if you are using an android device to get the pro version of the device.

I tried doing the ROW headlight codes and it worked perfectly on my B7 Cabrio but when I start the car I get all sorts of codes that my tailight bulbs are out 🙁 if I change it back back to USA all the errors go away and they work perfectly. Any idea why?

@zigmatronik

3 жыл бұрын

So you did Central electronics rest of the world coding on. Try coating the cluster to rest of the world as well. Let me know how it goes.

Can I use this to turn off my daylights off? Thank you for that euro headlight code thats what i have been looking for.

@zigmatronik

7 жыл бұрын

I found something I will try it this weekend. Here is what I found if you want to try it your self. Coding ?xxxx: Chassis 0 = Limousine (PR-K8B) 1 = Avant (PR-K8D) 2 = Cabriolet (PR-K8K) x?xxx: Driving Light Switch 0 = Rain/Light Sensor (G397) not installed (PR-8K0/8K1/9C6/8K4) 1 = Rain/Light Sensor (G397) installed (PR-8K3/8K7/9C7/8K9) xx?xx: Trailer Hitch 0 = Trailer Hitch not installed (PR-1D0) 1 = Trailer Hitch installed (PR-1D2) xxx?x: Headlights 0 = Halogen Headlights w/o Daytime Running Lights (PR-8Q0/8Q1+8K0/8K7) 1 = Halogen Headlights with Daytime Running Lights (PR-8Q0/8Q1+8K1/8K3/9C6/9C7) 2 = Bi-Xenon Headlights with Daytime Running Lights (PR-8Q3/8Q5+8K9/8K4) 3 = Bi-Xenon Headlights w/o Daytime Running Lights (PR-8Q3/8Q5+8K0/8K7) 4 = Bi-Xenon Headlights with Daytime Running/Tail/License Plate Lights (PR-8Q3/8Q5+8K1/8K3) xxxx?: Country 1 = Rest of World/Nordic Countries/Denmark/Croatia/Baltic Countries with Bi-Xenon 2 = Nordic Countries/Denmark/Croatia/Baltic Countries without Bi-Xenon 3 = USA/Canada with Bi-Xenon 4 = Canada without Bi-Xenon 5 = Special Vehicles

@zigmatronik

7 жыл бұрын

It worked !!! Here is a video I made. kzread.info/dash/bejne/qpl6sqSskZO0kbQ.html enjoy .

@emannyueru4179

7 жыл бұрын

holy crap thank you very much! your a life saver.

@zigmatronik

7 жыл бұрын

Glad I can help.

Im having my ABS module rebuilt on my 2001 VW Passat Can I use this to recode the ABS module?

@chancecampbell8361

4 жыл бұрын

Every find out if this could do that?

@zigmatronik

4 жыл бұрын

It cant recode the abs module but it can diagnose the issue. See if your wheel speed sensors are good or not.

Is this is obd eleven pro version or just the regular one?

@zigmatronik

6 жыл бұрын

Pro version.

Does this device have the ability to reprogram an immobilizer (key fob)? I've been unsuccessful reprogramming my fob the manual way.

@zigmatronik

6 жыл бұрын

I will check that out of you when I get the chance.

@XxXxOUTKASTxXxX

6 жыл бұрын

ZigmaTronik I appreciate it! I've already disabled the seat belt chime and programmed the windows option and single lock/unlock on my fob that works. Your videos are very helpful too.

Nice! But why would you use fog lights on the "countryside road"? Blinding passing cars and yourself.

@zigmatronik

6 жыл бұрын

There are restrictions in north america for the amount headlight bulbs that can be on at once. Europe does not have that restriction. All I did was put the car in to Euro mode so I can have fog lights on while the high beam is on. North American Law dictates that the maximum amount of bulbs that can be on at once is 4 hints the fog light turns off when high beam is on. I would understand if this was the B6 since it has its own independent high beam bulb. But the B7 is bi xenon and the light output on the B7 is bad in my opinion. Plus I wont be blinding anyone ( Fog lights are aimed properly ). I just need to turn off the high beam when there is on coming traffic. Thank you for your comment. Also sorry for responding so late. Just noticed your comment.

Do you know how to code it to make the fog lights come on while the day time running lights are on? And also a needle sweep?

@zigmatronik

5 жыл бұрын

Sorry but the only b7's that can do fog light for DRL is 2005 models ( because only the B6 had the foglight as DRL ) and the Needle sweep starts form gen B8.

@bflaves123

5 жыл бұрын

@@zigmatronik I actually have a 2005 b7

@zigmatronik

5 жыл бұрын

@@bflaves123 Well in that case all you have to do is set it to Canada in Central electronics ( it should work. I read up on it a while ago on audizine )

@bflaves123

5 жыл бұрын

@@zigmatronik Thanks! I'll see if that works

I have a 2017 A3. Any reason why Module 46 doesn't show up in the scan? Also, it doesn't recognize it if I add it manually.

@zigmatronik

6 жыл бұрын

That is because you are comparing the coding for a B7 a4 to a 8v a3. There is about 12 years of development changes between your car and mine. Also your generation of a3 only has been out for 3 years. People are still tinkering with it. I found this thread online to help you out. forums.vwvortex.com/showthread.php?6898009-Audi-A3-S3-8V-VCDS-VAG-COM-Modification-list

@ThatGuyDogboy

6 жыл бұрын

ZigmaTronik thank you

By any chance do you have any way to recode a battery on a 2005.5 Audi A4. I replaced a battery with factory one but Audi wants 260.00 to code it. Any idea how to do it with odb eleven. I can’t find anything online.

@zigmatronik

6 жыл бұрын

I dont think that B6 or B7 a4's are battery sensitive. What kind of code are you getting ? The reason I say that ^ is because the factory battery rating is 800 cold cranking amps. When my battery died on my car I went to a junk yard and got a battery out of a 2004 bmw 745li which is rated for 900 cold cranking amps. The thing barely fits in the battery location. I have never had a code for having a different battery. I think audi might be pulling your leg.

@DanCastle518

6 жыл бұрын

ZigmaTronik very possible. I have some codes for implausible signal intermittent etc. I assume it may be a short but just replaced battery so figured I try and do what they say.

@zigmatronik

6 жыл бұрын

Thats weird. What module shows the fault ?

Do you know if you can use this to bypass the speedlimiter

@zigmatronik

6 жыл бұрын

No it can't bypass the speed limitor

The first thing u did , with the windows , i can do that with my b7 without using obdeleven

@rcl300018

5 жыл бұрын

Same here (Australian model)

@zigmatronik

5 жыл бұрын

I think the European models shipped with that feature enabled.

What is this sound coming up when windows are going up. I have the same sound in my car. Thank you

@zigmatronik

3 жыл бұрын

Driver side window regulator is going bad

the window thing is a standard feature anyway, well mine does it anyway

@zigmatronik

3 жыл бұрын

It was standard for everything outside of North America.

Is the a code to retract side view mirrors when parked?

@zigmatronik

4 жыл бұрын

not sure because my car didnt have folding mirrors

from where can i buy ?

Hello good afternoon !!! Could you help me change two things? 1. Acoustic sound when opening or closing the car. 2. Turn on the fog light if I turn right or if I turn left. Thank you so much

@zigmatronik

2 жыл бұрын

What year is your car / model

@mariotech27

2 жыл бұрын

@@zigmatronik Audi a4 b7

Is this compatible with older audi a4 2.0t models like 2005

@zigmatronik

3 жыл бұрын

Yes all the way with 1997 like the b5 a4 and up.

why do you add 64 to code for windows? Can you break down where you get the numbers?

@zigmatronik

7 жыл бұрын

There is a very good site for coding Vw Audi's called www.ross-tech.com/vag-com/cars/audiB6.html State Bit Dec. Function ON 0 1 windows up with remote ON 1 2 windows down with remote ON 2 4 windows up with key in lock ON 3 8 windows down with key in lock ON 4 16 sunroof close with remote OFF 5 32 sunroof open with remote (does not appear to work) ON 6 64 sunroof close with key in lock OFF 7 128 sunroof open with key in lock (does not appear to work) " ON 6 64 sunroof close with key in lock " By holding lock and or unlock button you are activating code 64 witch is Windows via remote. Feel free to ask any other questions .

@jakubmajewski3831

6 жыл бұрын

I'm sorry but on the site I see that under 6 and 64 is sunroof close with key in lock not "By holding lock and or unlock button you are activating code 64 witch is Windows via remote."

Hy there Cou you show me how to code original Towbar treiler modul at sistem THIS IS PART OF TREILER COMP. NR 8E0907383C Thanks.

how do you determine how many bits to add or remove from the present code?

@zigmatronik

4 жыл бұрын

trial and testing. Basically add the bits and test if it worked. If not then putting it back to the original value

@elijahkeith5766

4 жыл бұрын

@@zigmatronik so just add random numbers until something different happens? or did you know that 64 bits could be added to control the windows?

@zigmatronik

4 жыл бұрын

@@elijahkeith5766 yes basically back and forward. So basically here is the list of things that is listed for Module 9 which is central electronics . OFF 0 1 Great Britain- alarm system (only with bit 4) OFF 1 2 flash on when arming/unarming alarm system ON 2 4 selective locking 1 door/all doors ON 3 8 activate alarm system OFF 4 16 rear unlocking block via speed OFF 5 32 locking via speed OFF 6 64 comfort functions with remote (adapt in ch 62!!) OFF 7 128 right side steering OFF 8 256 avant (glass break sensors in rear side-and rear windows (if error: safe-LED constantly lit )) ON 9 512 1x flash when lock with remote ON 10 1024 horn sounds when lock with remote ON 11 2048 door/window-logic ( ignition off: No open door el. windows works 10 min ) OFF 12 4096 normal/????-alarm system ON 13 8192 No SAFE-function USA only OFF 14 16384 insulate-glass PR-nr 4KR/4KV Add and or subtract

@elijahkeith5766

4 жыл бұрын

ZigmaTronik thank you

got a 06 audi a4 2.0t comfort control has stopped working they wanted $1000 to replacegot one with same numbers plug and play. windows etc. works now. but only have one key fob and doesnt work now tried reprogramming but didn't work.

@zigmatronik

6 жыл бұрын

I had that happen to my brothers car. I am guessing keyless entry does not work ether ? What I did was go to the junk yard and get the comfort modal . Its located under the driver foot well. Like show here www.capav.com/Audi/Misc/ConvModule_800.jpg What happens alot is that the module gets water damage over time ( because of winter/rain season) When you have the regular mats. (In my opinion stupid location to have the module. Just make sure that when you get the module you also get the keyfob for the donor car ( just the button side.) so you dont have to reprogram the keyfob ( dont need the key size because you will slap it on to your own key. ) One other thing. Before you do all that ^ take out your comfort module to see if there is any water damage / corrosion. Let me know how it goes.

@df.hutton7570

5 жыл бұрын

Programmed my FOB Remote last night...can definitely be done!!!

any codes to make it light up headlights when i unlock it

@zigmatronik

6 жыл бұрын

I dont think you can have the lowbeam turn on when unlocked. I will dig through the codes to see if I can find anything.

@zigmatronik

5 жыл бұрын

No unfortunately I don't have the b7 anymore. Engine failed 2 months later :( 2.0 FSI engines are the worst. You would have a better reliability with a b5 s4... ( and that has 2 shit ko3 turbos on them that fails)

How do I decode the fog light error. Recently change them to led. Audi b7 iso obd11 pro

@evaldaskowka

4 жыл бұрын

buy resistors

@zigmatronik

4 жыл бұрын

Yeap those LED's are not consuming enough watts so the computer trips out thinking they are dead.

It's possible to mod the Bluetooth input to use the Bluetooth for music not only phone calls?

@zigmatronik

3 жыл бұрын

Germans are trolls its only mono Bluetooth

Would this work on a 2009 Audi A4 B7 Cabrio!?? Take my money if so.. I swapped over to a European ballast so I could drive the clear no Amber cap turn signal cover lens housing and my system is a freaking out.. I've not seen anybody else call this out as a fix have you ever heard of anything like that!?

@zigmatronik

2 жыл бұрын

Yes because you can make the car think that its in Germany...

Is there one for iphone??

@zigmatronik

5 жыл бұрын

They just announced gen 2 OBDEleven and it will support iOS

So obd11 and all codong thing is mostly useful for newer cars :(

@zigmatronik

4 жыл бұрын

from 97 and up. Also more features to play with car from 2009+

@ygalion

4 жыл бұрын

@@zigmatronik That was old comment, but yeah, newer cars has more rich options to do with this device, but anyway for data reading this device is better than any chinese clone

Is that headlight test work for b6 ?

@zigmatronik

6 жыл бұрын

It does if you have the HID version of it with the leveling.

@wafi3187

6 жыл бұрын

ZigmaTronik I don’t know I have or not

How did you change the speed odometer colour and does it show the digital speed

@zigmatronik

3 жыл бұрын

Color display is from factory. And no it doesn't read digital speed unfortunately

@firasalramo7514

3 жыл бұрын

@@zigmatronik thanks

@cristiancontreras7892

2 жыл бұрын

Go to "Car > Gauges > Vehicle Speed. It reads the true speed straight from the computer. I found out my speedometer actually off by 5mph. If it reads 70mph, I'm actually going 65mph based off the computer

Do you know why the window open and close with key wouldn’t be working with b7 a4 2.0t? My original code was 11120 and I added the 64 and code was a success but it didn’t work. Do you know why?

@zigmatronik

8 ай бұрын

depends on many things. Where is the car from ? EU NA Rest of the world ? Have you tried my settings code Module 46 Factory code 11820 Window Remote Control code 11884 let me know.

@adrielgonzalez4746

8 ай бұрын

@@zigmatronik it’s from the us

@adrielgonzalez4746

8 ай бұрын

@@zigmatronik and yes I have

@adrielgonzalez4746

8 ай бұрын

@@zigmatronik oops my bad I meant to put I used 11884 to begin with didn’t realize I messed up my number but it didn’t work so I’m not sure why.

@zigmatronik

8 ай бұрын

@@adrielgonzalez4746 Try replacing the battery in your key. Also keep in mind you do have to hold the button.

Is there a limit on how many cars you can scan?

@zigmatronik

5 жыл бұрын

as meany as you want. I my self have scanned and programmed 19 cars so far.

@mraccord92

5 жыл бұрын

@@zigmatronik was wondering if this had a VIN limit based on license like vcds

How easy is it to enable VIM?

@zigmatronik

6 жыл бұрын

Not sure I did not deal with B8+ a4's before.

@nero9643

6 жыл бұрын

Very easy iv done main yesterday

Hey thanks for your video .i have audi a6 c7 2013 in belgium. please you can help me .hoe can find codes for this car? thank you end good luck

@zigmatronik

2 жыл бұрын

There is a Audizine community for C7 a6. There is alot of coding that is possible with the C7 on that page. Hope that helps :) >> www.audizine.com/forum/showthread.php/566240-C7-A6-A7-amp-S6-S-amp-VAG-COM-list-and-help

Do you know how to properly program a new key fob?

@zigmatronik

3 жыл бұрын

You need vagtacho for that

@daleward3077

3 жыл бұрын

@@zigmatronik vagtaco? Iv read people doing it with obd11 and can get in the key fob systems. Just wast sure if you've done it with obd11

@zigmatronik

3 жыл бұрын

@@daleward3077 yes but you need to find out what your security code is for the immobilizer

@daleward3077

3 жыл бұрын

@@zigmatronik hmm are you familiar with how?

@zigmatronik

3 жыл бұрын

@@daleward3077 yes pretty familiar all you need to do is just look up vagtacho immobilizer on KZread

Can it add n enable dis ?

@zigmatronik

4 жыл бұрын

Not sure in your case but I have removed DIS once just to test it out so I think so.

Care to explain how you knew what codes were what?

@zigmatronik

2 жыл бұрын

If you look up VCDS coding you can find a detailed list of codes that is possible for you car and what module it is under. For me I looked up B6/B7 audi a4 (2002-2008) coding VCDS.

How did you know the codes?

@zigmatronik

Жыл бұрын

If you look up VCDS for your audi or vw all to cods will come up on RossTech website

What is needed to do this

@zigmatronik

6 жыл бұрын

OBDEleven and Android phone

@franslangefors6711

3 жыл бұрын

@@zigmatronik dont u need an obd port/contact to Connect your phone?

@zigmatronik

3 жыл бұрын

@@franslangefors6711 obdeleven is the device Every car has a obd port for diagnostics. And at this point pretty much everybody and their mother has a phone.

@franslangefors6711

3 жыл бұрын

@@zigmatronik but Isnt there a contact u have to buy and plug in the obd port to Connect the phone?

@zigmatronik

3 жыл бұрын

@@franslangefors6711 yes the device is called Obdeleven...

Well the Coding function's just not supported on the B6..

@zigmatronik

4 жыл бұрын

Some of the coding is not supported.

Mine needs the ProPlan for coding 😐

@zigmatronik

2 жыл бұрын

Its a key you buy one time

Hi . U cant read all codes for a cars audi a 4 b6/b7 :)

@zigmatronik

4 жыл бұрын

why not ? it scans all the modules. :)

Should just have the camera on auto focus!!!!!

@zigmatronik

4 жыл бұрын

In low light the 18-55mm Nikon lens sucks at auto focus.

This does not work on b6 as they have short coding and b7 is long coding. So if you have b6 don't waste your time watching

@ussrassassin6112

5 жыл бұрын

Want to talk about I have a B6 A4 and I did the same mods. The fact that is both B6 and B7 use identical Electronics of course slight variations between the years. They're both are under 8E chassis code. The difference between B6 and B7 is a full exterior design change and slight interior design change. You ever wonder why B6 has the same interior as a B7... also the last thing is the B8 is considered as 8K and the B9 is considered as 8F...

Never disable Seat belt warning, and never use Beep stoppers. SEAT BELT IS THERE FOR A REASON, to save your life in case of an accident. Did people not learn that? I don't care if it beeps, put your seat belt on. Is it that hard? Like you are not doing a fucking marathon.

@zigmatronik

2 жыл бұрын

I am not telling people to do it for when you are driving. More for when you are waiting and idling. You know when you are parked and not moving... If people dont have common sense in the first place they should not get a drivers license. BTW funny thing that the German variant of the cars dont have the seatbelt chime enabled for a reason. Almost all citizens are law-abiding...

What's the name of the obd app you have on your phone? And what blue device do you have to Connect to your car and the obd app? Thanks

@zigmatronik

7 жыл бұрын

OBD Eleven

@zigmatronik

7 жыл бұрын

You have to buy the dongle obdeleven.com/en/ It cost me around 75 Cad Make sure you get the Pro version.