NucBox G3 Mini PC from GMKtec With Intel N100 Processor Opening and SSD M 2 upgrade to 2TB
Ғылым және технология
My recommendation. I am blown away by this Mini Computer!
NucBox G3 Mini PC from GMKtec With Intel N100 Processor Opening and SSD M.2 upgrade to 2TB
More detailed on: pcmasterx.com/index.php/blog/...
0:02 Introduction
0:09 Let's see what's inside that mighty little box.
0:24 Removing the housing cover
0:34 Dismantling DDR4 ram memory
0:54 Dismantling SSD M.2
1:07 Unscrewing the 4 screws that hold the motherboard.
1:34 Motherboard holder
2:03 Disconnect the antennas from the wireless card
2:13 Peel off the tape that holds the motherboard
2:46 Spread the plastic a little to pull out the motherboard
3:18 Untwisted sundresses holding the Fan
4:02 Now let's close the NUCBOX G3
6:10 Small upgrade 2TB M.2 SSD
6:50 THE END
Intel 12th Alder Lake-N series N100, 7nm, 6 MB Cache, TDP 6W
Intel UHD Graphics (Up to 750MHz)
DDR4 3200 MT/s, SO-DIMM*1, max 32GB
M.2 NVMe PCIe 3.0 M.2 2280, max 2TB
M.2 sata 2242, max 2TB
USB3.2（Gen1*1 5Gbps/S）*4
HDMI (4K@60Hz)
HDMI*2 4096 x 2160@60Hz
Headphone jack 1*3.5 mm
Giga LAN (RJ45)*1 2.5G 2500M
DC IN（5.5/2.5mm）, 12V/3A
Supports Window 10 and 11, Linux BT5.2 / WiFi 6 2
Website --{ www.pcmasterx.com }--
Audio
Outpost X by Neon.Deflector
neondeflector.bandcamp.com
Promoted by Royalty Free Planet: royaltyfreeplanet.com
Creative Commons Attribution 3.0
bit.ly/RFP_CClicense
![GMKtec NucBox G2 REVIEW [Intel N100 Mini PC]](/img/d.gif)
Пікірлер: 42
Thanks for the video. Got me to the CPU to check thermal paste.
@PCMasterX
5 ай бұрын
Awesome. That's great to hear.
@PCMasterX
Ай бұрын
@@bad1080 paste ...
Thank you for this "deep dive" into the NucBox! Wasn't sure about the process, so I waited for someone trying it first... :) Are you running Win11, if so, how to transfer the OS to the new SSD?
@PCMasterX
5 ай бұрын
I would install New Win 11 on the New disk. You can download the drivers from the manufacturer's website, copy them to a usb (so that you have the drivers ready because win does not have a LAN and Wi-Fi driver in it)... or Another option You could create an image of the disk, then restore it to New But for you need an m.2 to usb adapter and a computer with enough space to copy the ssd...
@weinbergfahrer4048
5 ай бұрын
@@PCMasterX Thanks for your help!
@oliverszk
19 күн бұрын
@@weinbergfahrer4048 Don’t just do a clean reinstall and get the drivers from the official website. The drivers from the manufacturers could be infected, especially if your PC is as cheap as mine. It only cost me less than 75€.
Nice video. My barebones G3 arrived today. It's missing a screw in the 2280 M.2 slot 😕 Update: I was mistaken. Found the screw in a bag of hardware for the vesa mount, for some reason. The screw for the 2242 slot is on the motherboard.
@PCMasterX
4 ай бұрын
Very sad ... My model was with an m.2 ssd so I got a screw but I also got a screw on the m.2 at 2242 and if that ssd wasn't there ... with the new m.2 ssd you get one or even two screws...
Hello! That video is usefull! Do you think it is possible to replace wifi board with Google Coral PCiE module?
@PCMasterX
4 ай бұрын
I don't have the wireless card to try it out...but if it's an m.2 slot it would probably work...
Is the fan 5v or 12v? Also do you void warranty if you disassemble is like that for maybe repasting it? because you are removing that tape that holds the motherboard its easy to see it has been opened.
@PCMasterX
4 ай бұрын
Yes, but that's why I know that the fan is DC 5V ...
Im looking at getting a barebone and installing my own ram and ssd, do i have to use a particular brand when installing ram or can i throw a g.skill module in
@PCMasterX
2 ай бұрын
I didn't try it with that brand of memory, but I tried it with other memories and it works. It is important that the memory is DDR4 3200Mhz... and if the memory has a cooler, will it physically fit inside?
Using mine with unraid as a NAS drive. Anyone know if I could use the m.2 slot the Wi-Fi card is in for an m.2 2230?
Can you upgrade the intel processor to i5 or i7?
@PCMasterX
4 ай бұрын
On that mini pc, the processor is soldered...
According to intel information on the N100, the accepted memories are: DDR4 3200 MT/s DDR5 4800 MT/s LPDDR5 4800 MT/s With max memory of 16 GB. Is this information still valid with your motherboard? Can I use the DDR5 4800 MT/s ?
@PCMasterX
4 ай бұрын
This mini pc model is a variant with DDR4 3200 and works only with DDR4 memory.
Does anyone have Bluetooth gamepad Problems in batocera 38, when WiFi is turned on? After connecting my gmktec with WiFi, my Bluetooth gamepad has latency Problems. (Tried for 3 different gamepads, and for all the Same Problem) I have Input delays and Sometimes the Buttons dont Work at all. My gmktec is connected in the 2,4 and 5 GHz frequency wifi. I switched to 5 ghz-only, but unfortunatelly nothing changed at all. Any ideas? Thanks!
@ItsReallyGeo
4 ай бұрын
can you replicate it with an ethernet connection?
I bought one and unfortunately does not have the option to activate to start auto on power failure.
@PCMasterX
4 ай бұрын
Of course it can be set in bios ... Chipset option -> PCH-IO Configuration -> Wake on Power Automatic -> set to -> S0 State ...
@badercaadrian3743
4 ай бұрын
@@PCMasterX thanks for the info it works now!
@gotheat-en6nw
3 ай бұрын
@@PCMasterXHow to enter bios?
@PCMasterX
3 ай бұрын
@@gotheat-en6nw On the (Delete) button...
I swapped out my 256gm for a 2T ram chip and now I’m stuck in the “bios setup utility” page and it won’t actually start my computer. Help?
@PCMasterX
19 күн бұрын
You don't have an operating system on your new ssd, you need to install windows or linux. You need to create a USB with Windows or Linux, so that you can use it to install the operating system on the new drive.
@thwhitrabbit
19 күн бұрын
How do I get any OS onto a USB without paying for some windows package (unless that’s illegal to ask) the original PC came with windows 11 on it
Anyone know if this G3 comes with a intel chipset wifi 6 card or Realtek chipset? Conflicting reports so I am just curious which is it.
@PCMasterX
3 ай бұрын
My G3 came with Realtek WI-FI 6 …
@hawaiiangeekz6986
3 ай бұрын
@PCMasterX thanks for replying. I ordered a G3 which arrives in a few days. I'll probably buy a intel wifi 6 m 2 card if it has a Realtek. Appreciate your reply.
@hawaiiangeekz6986
3 ай бұрын
@PCMasterX Does it really matter which antenna wire is connected to the wifi card? I took a picture of the original wifi card before i removed it, the black antenna wire was connected to AUX & the gray wire connected to. MAIN. I've read conflicting reports that it doesnt matter which antenna wire is attached to MAIN or AUX. I'm just curious. Wifi works with new intel wifi 6e card but lol it shows a ethernet connection when I'm not using ethernet. I'm using wifi only. I don't have a cat cable connected to my G3 mini pc. Strange huh
I wanted to install Openmediavault in this G3, however I receive these USB errors at boot gen 23 13:34:20 openmediavault kernel: ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) gen 23 13:34:20 openmediavault kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20220331/dswload2-162) gen 23 13:34:20 openmediavault kernel: ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) gen 23 13:45:34 openmediavault kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20220331/dswload2-162) gen 23 13:45:34 openmediavault kernel: ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) gen 23 13:45:34 openmediavault kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20220331/dswload2-162) gen 23 13:45:34 openmediavault kernel: ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) gen 23 13:53:26 openmediavault kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20220331/dswload2-162) gen 23 13:53:26 openmediavault kernel: ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) gen 23 13:53:26 openmediavault kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20220331/dswload2-162) gen 23 13:53:26 openmediavault kernel: ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) G3 support replied me that they only support Windows 11 but it seems a Bios issue. Anyone is having these USB issues with G3 ?
@PCMasterX
5 ай бұрын
Open Media Vault 6.5 works on G3 now tested. turn off the secure bot in the bios and create an installation usb with ventoy ...
@meneguzzo68
5 ай бұрын
@@PCMasterX Thank you , exactly what secure bot setting did you disable ?
@PCMasterX
5 ай бұрын
@@meneguzzo68 In the bios section, security (Attempt Secure Boot to disable) ... after that save and restart ... if you want to use win 11, you have to turn it on again ...
@meneguzzo68
5 ай бұрын
@@PCMasterXThank you it was already disabled. I think my USB ports are broken in this case. I continue to receive this error and I can't use external USB drives. gen 26 07:12:56 openmediavault kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS01], AE_NOT_FOUND (20220331/dswload2-162) gen 26 07:12:56 openmediavault kernel: ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220) gen 26 07:12:56 openmediavault kernel: ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.TXHC.RHUB.SS02], AE_NOT_FOUND (20220331/dswload2-162) gen 26 07:12:56 openmediavault kernel: ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20220331/psobject-220)
@PCMasterX
5 ай бұрын
@@meneguzzo68 Try with another usb stick...