Amazing teardown!

@PBKreviews

3 жыл бұрын

Thanks!

This is satisfying!

This is just what I needed as my phone's battery started building up gas, I can say, you can detach the battery without much adhesive removal (or any in this case) but it is a longer process than what was show on the video. I also didn't fully dissassemble the phone, just enough so I can get the battery out of the way.

@PBKreviews

Жыл бұрын

Glad it helped. Yeah I sped up portions of the video or cut out portions which take long to reduce the length of video and since most people skip through it etc. :)

Question: I have to replace merely the glass,is it possible or do I have to replace all the LEDs and so on? Asking cause all the replacements seem to be just the glass without any LEDs or wiring... (LEDs and wiring are fine, it's the glass that decided to explode without any plausible reason to do so).

I loved your great work. 🇪🇬🇪🇬🇪🇬❤️

@PBKreviews

2 жыл бұрын

Thanks!

Very good work!

@PBKreviews

2 жыл бұрын

Thanks!

Buen video👍

@PBKreviews

3 жыл бұрын

Thank you

Coolll!!

This vid should have more views

@PBKreviews

3 жыл бұрын

Thanks!

Nice

new sub ❤️

@PBKreviews

3 жыл бұрын

Thanks!

You video is so amzing

@PBKreviews

3 жыл бұрын

Thanks!

Where other OEM's can't incl 3.5mm jack plus massive battery & sell it for $1-2k. This Phone includes all parts even had space for Small Fan to fit on top of it a massive 5050mah battery too! Also Glass Sandwiched rather than plastic back. But when it comes to teardown & repairablility its too complex & congested built.

@PBKreviews

3 жыл бұрын

Yea, I guess depends all on each manufacturers engineering and so forth. But ya it also makes it more complex to teardown and repair.

Thank you sir

@PBKreviews

10 ай бұрын

You're welcome

1:23 Sooo...The phone has *VOICE COMMANDS.* Nice.

@PBKreviews

3 жыл бұрын

lol :)

How would you rate its waterproofness? Thats the main thing that worries me because of the 'open airflow'.

@PBKreviews

3 жыл бұрын

The area where the fan openings are is not open to the internals of the phone. Its a heat sink which is hollow on the inside and that hollow area is where the openings take air through from either side and there is adhesive all around the back plate and around the areas of the fan etc which keep the heat sink locked down basically so nothing from outside gets in. Hope I was able to explain it.

@moonlalune8003

3 жыл бұрын

@@PBKreviews I want to comment on this. Just now my phone is acting up, it shows the the logo but the screen is greenish and white light popping and then it shuts off. What happened was, some moisture got in the phone. My phone is new btw

@moonlalune8003

3 жыл бұрын

Is there any hope for my phone? I mean, I can return it to warranty yes but just incase this happens again, what is causing it? I mean why is the screen becoming greenish?

@PBKreviews

3 жыл бұрын

@@moonlalune8003 hi, well water damage is not covered under warranty. So if any time water does get inside the phone, it can damage the parts.

My phones charging port overheated or something and the charging port half melted along with half the connector part of the usb cable is this covered under warranty aka can I get my charging port fixed or replaced for free or no hope for this issue.. I was lucky to disconnect my cable before it turned into a fire but not enough that it melted half my charging port

@PBKreviews

2 жыл бұрын

Ya should be covered by the manufacturer unless you used a charger that was not meant for the phone etc.

Tengo un redmagic 6 pro descompuesto me pueden ayudar a repararlo???

Doesn't dust get into this phone? I wish there was a easy way to clean it... Or is it designed where there's minimal chance of dust getting in and blocking the fan from spinning?

@PBKreviews

2 жыл бұрын

I'm sure a little would get in and build up over time so would require maintenance over time.

hi, may i know is the backplate red magic 6 and pro the same, fit and precision? please reply

@braydenhulsey8421

Жыл бұрын

Yes, I'm 99% certain they are the same. I gotta replace the battery on mine and this job looks like hell. wish me luck.

@theguitarboy

Жыл бұрын

@@braydenhulsey8421 hi, recently i replace the backplate, and wow its fit 100%. GL to you

@braydenhulsey8421

Жыл бұрын

@@theguitarboy By any chance, where did you get the adhesive that you used to glue the backplate back on?

@theguitarboy

Жыл бұрын

@@braydenhulsey8421 i use the recent adhesive from the original backplate using, try using spray alcohol adhesive remover

SMH, with the FINGERPRINTS though!! And what's up with the flying plastic piece 🤣!! Looked possessed!!

@PBKreviews

3 жыл бұрын

lol I know right? probably it's seated in tightly so without the screws in place it gets squeezed out on its own.

@pereira2224

2 жыл бұрын

@@PBKreviews hello, would you like to know if using the external cooler with peltier chip will create moisture inside the phone since it has 2 air intakes on the side?

@PBKreviews

2 жыл бұрын

@@pereira2224 hi, im not sure.

Yup, many phone engineers will definitely mess up something while changing that phone battery

@PBKreviews

3 жыл бұрын

Yup not the easiest phone to take apart.

Do some gaming n performance test too bro

@PBKreviews

2 жыл бұрын

Ya I will need to do it on future gaming phones. I'm not a gamer myself, atleast on phones so I have never really played games on phones so I'm not very familiar with running those type of tests. I would first need to know how to play one of the games 😂

@bumbeelegends7018

2 жыл бұрын

@@PBKreviews haha its k bro but i wanna sse Playing intense games 🤣

@PBKreviews

2 жыл бұрын

@@bumbeelegends7018 😀👍

Bhi agr red magic 6 bulwau saudi se to kya dikkat face karna pad Sakta?

In terms of changing the battery for a new one, how would I do that, or do you have a video for that already?

@PBKreviews

3 жыл бұрын

What do you mean? its clearly shown in the video how to do it :)

@kennethsolis5075

3 жыл бұрын

@@PBKreviews so, literally I have to take all that out just to take the battery out too, damn, alright. But I still can't find where they sell a battery compatible with this phone

@PBKreviews

3 жыл бұрын

@@kennethsolis5075 Yea, you wouldn't have to remove the motherboard but you would need to disconnect all those cables covering the battery. Also ya it might be a while before replacement batteries start showing up online for this model phone.

@kennethsolis5075

3 жыл бұрын

@@PBKreviews alrighty thanks!

why did you not clean the black fingerprints when you reassembled it??!!!

@PBKreviews

3 жыл бұрын

would not come off, would require some special chemical probably to clean the copper film. Not sure what residue was on the persons fingers when they handled that film.

Can you do a durability test?

@PBKreviews

3 жыл бұрын

Hi, I don't have the phone with me anymore but usually I don't damage the phones since I sell them locally or elsewhere to recoup costs for future phone videos. Once I can justify the costs, I will start doing durability videos more often.

Where did u get the option for that color? I only had silver for pro and black for basic version.

@slushie3061

3 жыл бұрын

Silver and black for the pro and Aurora and black for the basic one

@Aryzon13

3 жыл бұрын

I assume it's not out yet. It wasn't even announced outside of Asian markets, and I believe even there it's still not available to purchase. Let's hope it won't take another several months before this version gets a global release.

@joncasa9773

3 жыл бұрын

@@Aryzon13 Cyber neon is available in asia, 12gb/256 rom. Though only it's in China Rom.

@PBKreviews

3 жыл бұрын

different regions or countries have different color options.

@gerardorodriguez2634

3 жыл бұрын

I got the silver and got to say it still looks stylish. The colored ones would of been nice though

That thing is a nightmare to take apart!

@AwesomeBlackDude

3 жыл бұрын

He'll pull out the back plate, and there you go, there's Corona 19 fingerprints, yuck! 🤣 😬

@PBKreviews

3 жыл бұрын

yea definitely not an easy task.

@PBKreviews

3 жыл бұрын

lol yup, not sure whats up with their quality control at the factory but I've seen similar things from these brands before just nothing this bad. As for the rest of the phone, it was clean.

How to change power button and power cable flex for redmagic 6? Can show some video for that? My redmagic 6 power button got probem

@PBKreviews

3 жыл бұрын

I don't have the phone with me anymore But from what I remember, once you took the phone apart, the flex cable with button clickers are held in the slot on the side frame with adhesive, you would need to peel it off to remove and the buttons should be able to be pushed into the frame once the flex is removed.

@user-kf9ym9cc6f

3 жыл бұрын

@@PBKreviewsok. Thank

If you change the screen, will you get 165hz? And 360HZ touch sampling?

@PBKreviews

2 жыл бұрын

As long as it's an original screen, then you should be able to get the original specs the device comes with working with no issues. But if the screen is a different brand and aftermarket, there is a chance it might not be the same quality and refresh rate etc.

Bro can you do A detailed video for people without knowledge of how to remove the back cover and install a replacement? It's needed since I haven't seen it on the internet 😢

@PBKreviews

9 ай бұрын

Not every back cover is the same, but most generally just have adhesive which needs to be heated up to loosen up and make easier to pry off. Maybe in the future if I have time I will make a dedicated video on back cover replacements, but here is a link for applying new adhesive for screens which is the same for back covers: kzread.info/dash/bejne/hmidy7KOebCdXbw.html

@randomgamer6385

9 ай бұрын

@@PBKreviews I really appreciate your time for answering me, I saw the video at the link but the lid of the Red Magic has a cable connected

The top speaker is so small?! So how can its stereo sound be really balanced as Nubia has claimed?

@PBKreviews

3 жыл бұрын

Hi, keep in mind the bottom speaker assembly is not the entire speaker housing, the housing is larger to allow room for noise to bounce and sound louder but the speaker is about the same size (inside the bottom speaker housing) as the top earpiece speaker.

Damn never seen that much thermal paste on a phone

@PBKreviews

3 жыл бұрын

lol ya, they used a lot.

U r fast

@PBKreviews

3 жыл бұрын

👍

Where did you order that

@PBKreviews

3 жыл бұрын

The phone? had it shipped to me internationally.

Bên mình có linh kiện moto rung điện red magic 6 không

@PBKreviews

Жыл бұрын

Hi, sorry no I don't.

poco x3 pro teardown please sd 860 on budget phone

How did u get it in that color 🧐

@PBKreviews

3 жыл бұрын

Different regions or countires have different color variations. This was an asian market global version.

I have the 6 pro...really bad network reception when compared to a Samsung side by side. Problem is I like the red magic phone and don't want to use the Samsung....sigh.

@PBKreviews

Жыл бұрын

Yep, I'm using a Vivo X90 Pro +, love the phone but I have to settle with no 5G and other connection issues at times since the network bands are not fully supported for this phone in my area.

can you replace its charging port?

@PBKreviews

Жыл бұрын

Yes it's on a replaceable flex cable.

My red magic wont charge even though it says its charging. Should I get it repaired?

@PBKreviews

Жыл бұрын

Probably. Might be a bad battery, not sure.

Redmagic 6 vs iphone 12 pro max, do a speed test and touch response, optimization

Where is the gyro sensore? Please

@PBKreviews

2 жыл бұрын

Hi, I'm not sure where it is located on the board.

@dhari7630

2 жыл бұрын

@@PBKreviews thanks friend

@PBKreviews

2 жыл бұрын

@@dhari7630 you're welcome

Hello sir My mobile hang and stuck while using and then restart Can you help me ?

@PBKreviews

Жыл бұрын

You might need to backup your data and do a factory data reset (which would erase all your data). If problem still persists, then you might have an overheating processor, meaning there is either liquid damage or the thermal compound transferring heat has worn out and you would need to replace the thermal paste or pad.

@aneesrajpootgaming737

Жыл бұрын

@@PBKreviews yes I update software and again reinstall software but phone is still not work properly

@aneesrajpootgaming737

Жыл бұрын

@@PBKreviewscan you help me for repair....because I don't know where its parts aviable

Why didn't you clean the fingerprint?

@PBKreviews

3 жыл бұрын

doesn't come off, I tried its embedded into the copper/graphite sheet and would need a certain chemical probably to clean it off which I don't have. Basically like someone spray paint on a surface which requires special chemical to get it off. Not sure what the person's fingers who handled it was covered in prior to touching that copper film.

@-Visible-to-anyone-on-YouTube-

3 жыл бұрын

​@@PBKreviews thank you for your answer

I thought the back panel had to have some metal on there too? Even mentioned on their spec sheet. Why are phone designers so unbelievably dull to build thermally constrained gaming phones with glass..... WHERE DID METAL UNIBODIES GO?? WHY

@PBKreviews

3 жыл бұрын

The metal they refer to is the heatsink probably. The all metal body are hard to work with due to the antennas since signal wont get through and they have to design plastic parts in between the metal housing which then weaken the integrity etc. It's possible but limiting as well.

@Caius1930

3 жыл бұрын

@@PBKreviews metal unibody phone with plastic or glass bits are just fine in terms of signal and extremely sturdy. Have you ever had a music red magic in hand before the 5s? It is truly imbecilic how phones moved out of metal to glass. Metal actually feels plenty more premium too. And again... makes for an amazing heatsink increasing lifespan durability and performance

@rachmatzulfiqar

3 жыл бұрын

@@Caius1930 it's not "imbecilic" move, more like, shady trick, you see, people are klutz, and company took advantages of that, they probably profiting off of back panel replacement more than their phone sales.

@Caius1930

3 жыл бұрын

@@rachmatzulfiqar Fair point, I suppose. But there are many who are now releasing plastic back panels; even samsung. They could very well release metal unibody phones. At least the red magic 6 pro has its processor thermal pasted to the half-aluminium back panel

Do you have Teardown on Rog 5

@PBKreviews

3 жыл бұрын

Hi, no I skipped that since there are a few teardowns of it already.

Didn’t realize the red magic 6 came in a rainbow color 🧐🧐

@vinxanityhq7122

3 жыл бұрын

Thats the pulse version i think

@Typicalhuebo

3 жыл бұрын

@@vinxanityhq7122 good to know because I contacted Nubia to see what other colors they had but it was a vague response

@PBKreviews

3 жыл бұрын

I think it's called Cyber Neon

Bro the price

@PBKreviews

3 жыл бұрын

Price of what?

@i.Nemesis_999

3 жыл бұрын

@@PBKreviews price of phone 12/256 version

WOW I AM FINALLY FIRST!

@eeturautavirta493

3 жыл бұрын

You may be thinking of Einstein's use of the phrase "For us believing physicists, the distinction between past, present and future is only a stubbornly persistent illusion." What he means is that all of space time - from the big bang to however things "end" - exists fully and completely all at once. Things don't "come into being" in the future or recede into the past - that's just an illusion. All of it exists right now, has since the beginning of space time, and never goes away. We just "travel" through it, and it is only our experience that makes it seem as if there's a difference between past and future, and hence an experience of "time." Think of the entirety of spacetime as being a giant loaf of bread - at one crust slice is the start of spacetime, and the other crust slice is the end of spacetime. But the entire loaf exists all at once and came out of the oven fully baked - it's not changing at all. Imagine a tiny ant starting at the beginning crust and eating it's way through in a straight line from one end to the other. It can't back up and it can't change it's pace. It can only move steadily forward and with each bite it can only get sensory input from the part of the loaf it's sensory organs are touching. To the ant, it seems that each moment is unique, and while it may remember the moments from behind it, it hasn't yet experienced the moments to come. It seems there's a difference in the past and future, but the loaf is already there on both ends. Now what makes it weirder is that the ant itself is baked into the loaf from start to finish so in a sense it's merely "occupying" a new version of itself from one moment to the next. This also isn't quite right, since it's more accurate to say that the ant is a collection of all the separate moments the ant experiences. It's not an individual creature making it's way from one end to the other - it's the entire "history" of the creature from start to finish. Conceptually difficult to grasp with our limited minds, and this has serious repercussions for the concept of free will, but those are different subjects for different discussions.

@PBKreviews

3 жыл бұрын

Nice!

@eeturautavirta493

3 жыл бұрын

@@PBKreviews You may be thinking of Einstein's use of the phrase "For us believing physicists, the distinction between past, present and future is only a stubbornly persistent illusion." What he means is that all of space time - from the big bang to however things "end" - exists fully and completely all at once. Things don't "come into being" in the future or recede into the past - that's just an illusion. All of it exists right now, has since the beginning of space time, and never goes away. We just "travel" through it, and it is only our experience that makes it seem as if there's a difference between past and future, and hence an experience of "time."

Where are the Fan's

@PBKreviews

2 жыл бұрын

You can see the fan @1:25 in the video by the pink side of the frame.

red magic 6 does not really shout QUALITY to me. Hence its lower price compared to Rog Phone 5, I don't think Rog Phone 3 or 5 would ever have such poor assembly - where is the quality control?

@linkssz1699

3 жыл бұрын

The rog phone 5 isn't any better, it failed the bend test.

@PBKreviews

3 жыл бұрын

Its a great looking phone, and has great features. However there is room for improvement and hopefully they will improve on it.

for what?

@PBKreviews

3 жыл бұрын

to show how to take it apart for repairs when people want to fix their phones and also build quality and ease of repair-ability for people who want to purchase the phone.

*First unlike*

Redmagic 6 vs iphone 12 pro max, do speed test and touch response, optimization

Redmagic 6 vs iphone 12 pro max, do speed test and touch response, optimization

Redmagic 6 vs iphone 12 pro max, do speed test and touch response, optimization

@masa5300

3 жыл бұрын

The iPhone operating system sucks. It's not just about hardware but software. Stop buying iOS devices

@mrlmao9211

3 жыл бұрын

@@masa5300 I'm using red magic 6