NSV LED Light bar for the Toyota Tundra Install Steps
14-21 Tundra NSV Hood-Mount Light Bar: www.headlightr...
In this video, Chris will be doing a full install of the Toyota Tundra Hood Grille Knight Rider NSV LED Light Bar!
In this video, Chris shows you how to install the NSV LED light bar on the 2014-2020 Toyota Tundra. The NSV LED Light Bar for the hood of the 2014 - 2020 Toyota Tundra is a multi-function system that replaces the grille in the hood bump of your Tundra and gives you a couple different lighting features.
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
5 Functions: (no strobe light, as of 3/1/2018)
1. Lock and unlock function: scanning/swipe effect.
2. Accent Lights: Daytime running mode for road use and increased visibility.
3. Full light bar function.
4. Scanning/Swipe (Knight Rider Style) function.
5. Disable DRL Function
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Other NSV Knight Rider Light Bar Videos:
💡NSV Hood Light Bar Install On Toyota Tundra STEP 1: • DELETE - NSV Hood Ligh...
💡NSV Hood Light Bar Install On Toyota Tundra STEP 2: • DELETE - NSV Hood Ligh...
💡NSV Hood Light Bar Install On Toyota Tundra STEP 3: • DELETE - NSV Hood Ligh...
💡How To De-Pin the NSV Harness: • DELETE - How To De-Pin...
If you have ever thought that it was hard to see at night, your truck is missing some style, or you are just bored with the traditional standard look then this light bar is for you! Make sure to check them out on our website, give us a call (218-755-5200), or send us an email (sales@headlightrevolution.com)!
All Lighting Upgrades For Your Tundra: www.headlightr...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Table Of Contents
00:00 - Introduction
00:41 - Make sure you have the correct Instructions!
01:09 - Disconnect Battery
01:23 - Hood Vent Removal
02:15 - Light Bar Installed in Hood Vent
06:04 - Running the Wire Harness (Inside the Truck)
09:14 - Running the Wire Harness (In the Hood)
10:22 - Pinning the 12-pin Connector
12:20 - Installing Bar on the Truck
13:25 - Connecting Harness to the Battery
14:36 - Connection the Bar to Headlights
16:41 - OEM-LED HEADLIGHTS ONLY
17:10 - Driver Side panel Wiring
19:40 - Center Console Teardown
20:12 - Switch Panel Set Up
23:24 - Switch Panel Wiring
25:18 - Reconnect the Battery
25:31 - Output / Results
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Fitment guaranteed! If it doesn’t work, we will solve the problem for you. We strive to give an excellent customer service experience. Our dedication to delivering on that promise is backed by a no-hassle return policy. We’ll provide a full refund on products returned within 30 days, no questions asked.
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Other videos that we recommend watching:
💡 Lighting Color Explained: • HID Color Temperature ...
💡 Are LED Bulbs Brighter than Halogen? • 100W Halogen VS LED Bu...
💡 Are LED Bulbs Brighter than HID? • HID vs LED - Which is ...
💡 LED Bulbs Brightness Shootout - which bulb is the brightest? • Best and Brightest? We...
💡 Which HID Kit Color is the brightest? • Which HID Color is the...
💡 The TRUTH about LED Bulbs! • The Truth about LED bu...
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
For the best LED automotive lighting selection in the world, check us out here: headlightrevol...
If you have any questions about any of our products, email us at Sales@HeadlightRevolution or give us a call at (218) 755-5200!
/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/-*/
Find us on social media!
TikTok: / headlight_revolution
Facebook: / headlightrevolution
Instagram: / headlightrevolution
Pinterest: / headlightrevolution
Twitter: / headlightrevolu
LinkedIn: / headlight-revolution
We Do Lighting Better Because We Test!
Пікірлер: 653
Just got mine! Install was super easy and this light bar really does look like it came factory installed. Looks VERY cool and it is SUPER bright! Yes it is expensive but it is totally worth it once you can afford it (I waited six months for a Black Friday sale.) PAY ATTENTION to your wiring! Different trims might have different wire configurations on original connectors so you may have to do some repinning. I suggest contacting the NSV rep before installing the bar to make sure your wiring will work properly. I had a few electrical issues but it was totally Toyota's fault and NSV offers a solution. It's just better to have everything configured before you put everything together.
it is expensive..but it is high quality and it’s plug and play..I bought mine as soon as purchased my 2018 platinum..The only tough part of it was feeding it through the firewall... but I’ve noticed with feedback from customers who have bought it in the past, this company incorporates that into the new videos ..thanks guys . And I always get compliments on the look that the light bar gives me truck
@HeadlightRevolution
4 жыл бұрын
I’m so glad you love it! That firewall part is tricky for sure, I’ve done a handful of these installs and that’s still the hard part for me too. -Chris W
@jimbotag7236
Жыл бұрын
I have the same Platinum DC 2018. Any unusual steps in the wiring that you needed help on that differ from this video?? Thanks
I did this install today on my 2019 Tundra TRD Pro and I felt the hardest part was running the 6 pin wire harness thru the firewall. (I decided to send 3 wires at a time to make it easier)
I don’t know why I’m watching this, I don’t even own a Tundra.
@HeadlightRevolution
4 жыл бұрын
... Not yet! 😉
@TMoua79
4 жыл бұрын
Jigga Funk I’m in the same boat
@magicdeknight
4 жыл бұрын
One day you will
@jyg4883
4 жыл бұрын
Same here. Just love the look. One day for sure and one step at a time.
@bryanpaz7456
4 жыл бұрын
I dont have a tundra either but I've been wanting once since they redid the body style, love the beefy and bulky look of this truck
You did an excellent job explaining the process and the lights look great!
@HeadlightRevolution
4 жыл бұрын
Awesome, Thank you for the support! That means a lot. -Chris W
@JLeeChron
4 жыл бұрын
Yes great job on it, there are a lot of side points to use for other things
Nice quality lights, but I would not spend $1K on a light bar even if I had the money, drop the price to under $500 I would consider it.
@HeadlightRevolution
4 жыл бұрын
to each their own!
@JLeeChron
4 жыл бұрын
No doubt, way to expensive, but nice product!
@buddybuck
4 жыл бұрын
It's absolutely worth it!! I just had mine installed in my Army Green Tundra Crewmax. It's insanely awesome!! Thanks Headlight Revolution! You guys were amazing to work with. I'll be adding the new pictures this week: www.tundras.com/threads/my-new-2020-tundra-trd-pro-army-green-woooof-2-0.55315/
@jorgealvarez1558
4 жыл бұрын
1k lol, does this light bar give you a discount at the gas pump 😂😂
@buddybuck
4 жыл бұрын
Jorge Alvarez haha I wish! ✊🏽
Very well made video! I was thinking about selling my current 2014 Tundra TRD DC (with a ton of mods, Kings, etc) for a 2021 TRD Pro CrewMax for more interior room. If I do I'll be buying this. Those that complain about the price need to wake up! Great price for all this!
@v1antbo
3 жыл бұрын
LOL
@herbyverstink
3 жыл бұрын
so much room..could put a dance floor in there
I'm just starting my build on my Tundra while still trying to not break the bank, and when I saw this I thought I hit the jackpot, but I cannot lie, it's quite the cost. But more so reasonably priced due to quality and plug and play, definitely will be putting on my truck. (Not for another year or so), hoping that I remember.
@HeadlightRevolution
4 ай бұрын
We have some huge sales during the summer/Black Friday!
@iithelegend8068
4 ай бұрын
@@HeadlightRevolution Cant wait!
Can’t wait for you guys to come out for one for the 2020, picking up my tundra tomorrow, pricey light bar however just from your video alone, everything looks absolute quality, the video alone was done very very well and you went through every step, ignore all the haters who say it’s too expensive, if you want to get a $100 light bar and slap it in there, that’s all you, if you want a light bar that’ll look fully oem with custom switches and a high quality product, this seems to be the way to go, will definitely purchase one as soon as it comes out
@HeadlightRevolution
4 жыл бұрын
You couldn't of said that any better! NSV is working on a version that will work on the 2020, as soon as it's ready, we'll have it!
@PeterGriswald
19 күн бұрын
moron
Amazing light. The price is a little harsh, but i guess since it installs so easily and it does look factory, it makes sense. Great installation video. I find it funny that some people mess up on this installation when everything is labeled with numbers. Read people and take your time installing a $1,000 light bar.
@HeadlightRevolution
2 жыл бұрын
Agreed! It's almost as fool proof as it gets! Definitely worth the price though!
Would love to install on my tundra but it's crazy expensive.
@HeadlightRevolution
4 жыл бұрын
I feel you, but people find a way to afford the things that are important to them! Good luck!
@sailorkid94
4 жыл бұрын
Headlight Revolution god damn 😂 I guess people in Africa are starving because food isn’t important to them, or housing isn’t important to homeless families.
@kromekicks
4 жыл бұрын
How much is this?
@510kon
4 жыл бұрын
Joe Jr here you go. store.ijdmtoy.com/products/led-lightbar-kit-35-965?variant=19878770999399&Google%20Shopping&gclid=EAIaIQobChMIwdvF0t7O6gIVLh6tBh3RdgO9EAQYASABEgKW5_D_BwE
@gerard4441
3 жыл бұрын
sailorkid94 ooofffff lmao
Love the video you were outstanding and clear and explained everything great
@HeadlightRevolution
4 жыл бұрын
Glad you liked it😃 Thanks for watching!🙏
Completed my install today, fishing the wires wasn't nearly as easy as you made it look but I got it done, fit and finish is impeccable and wiring harnesses are OEM quality, video is far more comprehensive than the booklet. I decided to use the 3 in 1 switch instead of the replacement panel, it was more inconspicuous and less ostentatious, more simple cleaner look. Very very impressed with the quality of this product NOTE: The 3-in-1 also requires the red and blue wires to be clipped to the cigarette lighter harness, the booklet doesn't mention this specifically
Thanks for making this video. It was a big help with installing the NSV LIGHTBAR
I love mine, the single best mod ever on my Tundra next to the remote powered tonneau cover.
@joeyandzoeyspittyadventure8449
3 жыл бұрын
now the remote powered cover sounds like a huge waste of money and just spending quadruple the price to be lazy lol
@RobertAWolf
3 жыл бұрын
@@joeyandzoeyspittyadventure8449 Lazy for what? You must still have hand crank windows. Besides it's my money and it was well spent.
"All you really need for this assembly is a 10mm socket" I was hoping for a *"now where the fuck did it go..."*
Geeezzz, it does look great i admit, mostly just on, not sliding left to right, but what this hood scoop air opening came down to be used for. They really suppose to be covered on road, they not suppose to release inspection sticker if not for obvious reasons.... It is really nice sleek spot for offroad trucks light, instead of ugly retrofit box on roof, i'll give it that
@HeadlightRevolution
4 жыл бұрын
Thanks for watching!
Came hear just to get a reply from the company about how people afford things that are important to them. Im a tundra owner, they are crap off road. Majority of these trucks will never leave pavement. Lights are offroad use only. If a thousand dollar off road light is important to anyone with a "off road" vehicle with 2 open diffs. Save that money for a lsd, or a starter, or tires,or air bags, or a bed cover, or a new driveshaft, or seat covers, or a decent sound system, or better brakes.
@HeadlightRevolution
4 жыл бұрын
To each their own!
This is absolutely a must have if I owned a2019/ 2020 Tundra! Only thing....too much trouble in the installation process! I would pay you to have it done! Since if I had already spend a $1000 why not spend another few$$hundred buck to avoid all that headache!
@HeadlightRevolution
4 жыл бұрын
That’s very true! It’s a very involved install but as long as you do it one step at a time you’ll be okay.
Just received mine today from you guys thanks
Bad ass light and the fitment is outstanding but $1000!😲
@HeadlightRevolution
3 жыл бұрын
It all comes down the the quality and warranty.
This install is crazy....after paying $1k for the light bar ...it should come with free install. Imagin messing something up during install...now your out $1k and the extra cost to repair any mistakes. I love the light bar I just wish the price and the install become more buyed friendly. Hopefully they have a sale soon.
@HeadlightRevolution
4 жыл бұрын
Totatlly understandable, $1k is a tough price to swallow! Keep an eye out on some sales, this is something that we typically include in our sales!
@ramoncalderon8449
4 жыл бұрын
@@HeadlightRevolution thanks 4 the response! I will be on the look out for the sale!
Going through and reading all the reviews about the price of this thing. Yes in my opinion it’s way over priced. I guarantee if another company came out with a product like this, the company who makes this light bar would cut their prices. I think most people who own a Tundra, including myself have no problem with having the money to purchase one of these, it’s just the principal of not wanting to bend over and taking in the hole (Dry with no Vaseline). Shit, on my last Tundra I purchased a new front grille with a full light bar that was custom made for my truck for $750. The only way I’d pay a $1000 bucks is if the install came with it and a sexy woman sitting on my face.
@HeadlightRevolution
4 жыл бұрын
No denying that it's not a cheap light bar. But honestly, I think it's priced correctly. It's the only light bar on the market that is OEM quality and fitment. Once everything is installed, it looks like it came from the factory. If you're looking for more budget friendly options, we do have a few options from Diode Dynamics! headlightrevolution.com/vehicles/toyota-tundra/toyota-tundra-2014-2017/off-road-lighting-mounts-and-grilles/ Thanks for watching!
@Harleyrk99
2 жыл бұрын
Hell I own a 2017 Tundra and I couldn't afford this light bar. But dam it is good look'n.
I bought mine at a discount during July 4th week... Came out to around $850 or so... I have gotten compliments on It also. This light bar isn't for the "average Joe".
@HeadlightRevolution
4 жыл бұрын
It really is a cool piece of equipment, I’m glad you got to take advantage of the sale!
Awesome work dude wish Toyota did it from the factory
@HeadlightRevolution
3 жыл бұрын
Ya, that would of been cool!!!
I used lamin x amber film to cover the accent section for drl marker lights. Works well but cuts down about 20 percent of light. Wished nsv would make a amber drl in the future.
for pin #3 on the 12 pin harness, why not pre-install a dummy pin #3 to keep people from screwing it up?
@HeadlightRevolution
3 жыл бұрын
I am not sure on that, this is a harness and product made by the company NSV Lighting, you will have to check with them if you are wondering why they designed something in a certain way! Have a great day!
I agree it’s pricey but the quality, fit, finish is superb. I’ve wanted one for 6+ months. Head light Revolution had a 15% discount for July 4th. Couldn’t resist any longer !
@HeadlightRevolution
4 жыл бұрын
there you go! How did you like it once you installed it?
2 questions: 1) why do you need to connect to the headlight motor? 2) why did you cut the blue wire if you have factory LED headlights??
@HeadlightRevolution
4 жыл бұрын
These questions may be better directed to NSV, The company that makes the light bar kit. We followed the latest instructions from them when making this video and everything turned out great!
Watched most of this video then checked the price😮
@stevensmith5784
4 жыл бұрын
Yup lol I was like well nvm.
Thought about it, looked at the price, moved on.
@HeadlightRevolution
4 жыл бұрын
It’s not for everyone, Diode Dynamics makes a few good light bar kits for the front of these trucks that are more affordable though.
2021 version?
@l8nytr
3 жыл бұрын
following!
We don't have anything like this here in the UK. But I like the idea, except the 'kitt' lights. As spots / driving lights great
@HeadlightRevolution
4 жыл бұрын
It’s a pretty neat product that makes good use of the space that’s for sure. Also, We ship to the UK!
Please make available for 2020+ Platinum (those auxiliaries are different which I assume is why it’s not yet available) in AMBER and I’ll buy it yesterday. Seriously though, please!
Great video. Can this lightbar work by connecting it to a trigger controller? I want to avoid going through the firewall.
@HeadlightRevolution
2 жыл бұрын
I'm sure you could!
Where are you located to install on my truck
Great video. I have ordered this. I have a 2019 tundra TRD pro. Question: 1). Do I need to cut the blue wire on mine? I’m not sure if my headlights are considered LEDs. 2). My switch power panel looks different from the panel you showed in this video with the “security” - will this model fit my truck?
@HeadlightRevolution
2 жыл бұрын
For assistance with this product please reach out to our CS team! 218-755-5200 Sales@HeadlightRevolution.com
You just earned yourself another subscriber
@HeadlightRevolution
2 жыл бұрын
🙌
Crazy expensive I bought a 300 dollars single row 38 inch and put it there, I only pay 1000+ for suspension or tires not a single light bar lol
@HeadlightRevolution
4 жыл бұрын
You’re paying for the additional features and plug and play integration with this kit, Along with the bar itself which fits perfectly in the opening. It is spendy and not for everyone, I’m glad you found a good option for you!
It states that this will fit a 2020 in the title and I loved it, but when I went to the link it says it won't fit my Tundra cause of a new switch panel. Make this work....
@HeadlightRevolution
4 жыл бұрын
The 2020's have a slightly different switch panel design, and that's the only difference. NSV is currently working on a set up that will allow this bar to fit the 2020s!
...if installation was included, yes, in a heartbeat. Looks awesome though
@HeadlightRevolution
3 жыл бұрын
Haha, thanks for the comment.
This would be a great mod for my 2017 tundra .. just a little to expensive for me .. great instructional video !!
@HeadlightRevolution
4 жыл бұрын
Thanks for watching!
NICE!!! can't wait to put that LED on my 2019 TRD!!
@HeadlightRevolution
4 жыл бұрын
You’re going to love it!
@alexanderorozco685
3 жыл бұрын
@@HeadlightRevolution where l get this??
I just installed this 100% correctly, light bar works perfect ! However , my taillights and license plate lights are not working as they should at night. Only the blinker and brake lights work in the back. Front side marker bulbs are off as well, when they are suppose to stay on as well at night. Any ideas what could be the problem ? Thanks
@vvsstudios
2 жыл бұрын
Did you ever figure out the problem ?
@Jaimeleon20
2 жыл бұрын
@@vvsstudios yes, took it to Toyota Service Department and they said one of my connections needed a Ground. The fuses were popping without it, which caused all the problems. But it’s been fixed for a while now👍🏻 light bar is great.
My tundra has 6inch lift kit. will these bar blind the oncoming traffic? is there any way to adjust it ?
The night rider vibe goes with the truck since Toyota hasn't updated Tundra since 1980.
@HeadlightRevolution
4 жыл бұрын
Ha, That is so true.
Great video, probably gonna get the bar, however, what kind of tires are those?
I have 2021, and if you can plug is up without removing the front panel and light you have baby hands! Maybe the 2020 is larger?
Love this guys haircut.
@HeadlightRevolution
3 жыл бұрын
Oh yeah?😄
So just installed the light bar, but the main light bar isn't turning on. The swipe effect and drl is working. What could be the problem?
@HeadlightRevolution
3 жыл бұрын
Give us a call or shoot us an email if you're still having trouble. Phone: 218-755-5200 Email: Sales@headlightrevolution.com
When does the chinese knock off come out for 199 bucks???
@HeadlightRevolution
4 жыл бұрын
Surprisingly haven't seen one yet. Our experience though is that the Chinese knock-off is cheaper because it's cheaper... Doesn't fit as well, not as bright, not as reliable... you'd make a mistake buying any knock off of a product this high tech.
@g2theb584
4 жыл бұрын
@@HeadlightRevolution love your channel but most of the comments in regards to this product is the same. You have a very valuable NPS to capture the VOC and are attempting to defend the cost point. Rethink this.
@HeadlightRevolution
4 жыл бұрын
Gary, thanks for the feedback. I guess I just don't know what else there is to say. We aren't planning on making a cheaper version, and nobody else has either. There aren't any other options so there really isn't a discussion to be had. We don't make this one either nor do we set the price. It just is what it is and people will either buy it or they won't. Apologies if the comment came off as rude because that wasn't the goal. There are simply no other options to talk about.
@g2theb584
4 жыл бұрын
@@HeadlightRevolution in no way did I take anything as rude but as healthy debate. I understand there is no competitor to compete against the product. Which creates that market price to the public. Same exact thing happened with Rigid Industries. Super expensive as they had a niche and then cheaper options became available. Just the ebb and flow of supply and demand. If NVR came down in price they would sell MUCH more but keeping it high by the mfr only hurts themselves. Once again, Great product but, people are not seeing the value as I've mentioned. 500 bucks they would have a greater value to customer. Customer knows that the margin on this product over actual cost to manufacture is ludicrous.
@outlawstar9947
4 жыл бұрын
Is there one with a warmer tint and higher color rendering index?
I got a 2017 tundra .where can I buy 1 that fit my tundra look nice and thanks for the way you explain everything.
@HeadlightRevolution
2 жыл бұрын
Link in the description! 💪
If I see a 20% Black Friday or something similar I’ll definitely consider it. A clip on red Perspex cover would be awesome too!
@HeadlightRevolution
4 жыл бұрын
Make sure to subscribe to the channel, If we have any deals going on we'll usually post them here first!
@Fatenah1973
4 жыл бұрын
They are having a 20% off right now!
That looks amazing 👏
@HeadlightRevolution
2 жыл бұрын
It is!
So I hooked mines up today and it's blowing the fuse for the rear lights is it because I didn't cut the blue wire I have a 2018 tundra with factory LED lights help please
@HeadlightRevolution
3 жыл бұрын
We can help, shoot us an email and we can go ever everything that you will need to do in detail. Sales@headlightrevolution.com
Very nice but very pricey and a lot of work 😦😓 great video by the way!!! 👌🏻 👍🏻
What I would like to know is how well does this light bar hold up. Does the extra weight of the light bar cause any issues? Toyota likes to use an awful lot of plastic in the 2019 Tundra and I'm a bit concerned that after the hood gets slammed a time or two or I take the truck off road and the truck takes some hard bumps that the extra weight attached to this plastic part that honestly wasn't designed to have this light bar attached to it might come off and possibly damage the "hood bulge" or worse. Has anyone had one of these light bars installed on their truck for any length of time and can attest to their durability? Does it remain looking and acting like an OEM piece or does the extra weight of the light bar cause any damage to the plastic "hood bulge"? I like the look of the light bar and maybe it might come in handy. I don't care much for the $1,000.00 price tag though. I'm considering it but I would like honest answers to my questions first though. Anybody got one of these?
When or are you working on a version that will work with 2020+ models??? Thanks
@HeadlightRevolution
2 жыл бұрын
We have that available now! Make sure to include the 3-in-1 switch! www.headlightrevolution.com/NSV-Hood-Mount-LED-Lightbar-System-Toyota-Tundra-14-20_2
I have the NSV knight rider bar. I installed new LED headlights: now when I turn the truck off & lock it the light doesn't go back and forth. I didn't touch anything on the lightbar and to note every thing else works correctly. Any ideas why?
was a piece of cake except the grommet i have a 21 an all the brake lines run right on top of it other than that just like video
@HeadlightRevolution
2 жыл бұрын
Glad the install went smoothly for you!
Excellent video! I saw on another video from HR that these NSV lightbars can do a very quick flashing mode. I just bought and installed these but I didn’t see how you can enter the quick flashing mode where all the lights flash quickly. How do you get that functionality?
@HeadlightRevolution
2 жыл бұрын
This feature was removed, kind of a safety issue! 😅
If I put Morimotos front led head lights can I put this bar in my 2020.?
Please tell the community here , how many $1000.00 lights have you sold. I'm sure it may be worth it 😉
@HeadlightRevolution
4 жыл бұрын
We currently have 150 units in stock and go through that many every few months. It's a very popular light bar.
@Outdoor-Adventures
4 жыл бұрын
Headlight Revolution great light and idea, but you will sell more if the light is more affordable to an average Joe with a tundra, tundra is a very popular truck, we are not talking about putting a light bar on a Lamborghini. IMO
@baldeepsingh8042
4 жыл бұрын
Mr robot XX much smarter business tactic, it’s common sense, sell it at a better price and youll sell more making more money slowly over more sales, and then also creating a new customer that will come back again, this is honestly a total rip off, $1000 for this lmao, a joke.
Excellent installation! Excellent light bar. Im getting a 2021 limited in about 3 weeks. Im wondering if they bothered making the needed changes to fit the last year Tundra before the redesign, and if so, can I drive to Atlanta and have you do the install? The trip will be much quicker than installing it myself.
@HeadlightRevolution
2 жыл бұрын
We dont do installs in house, sorry!
@lloydedmonds8775
2 жыл бұрын
HaHaa great question! Just bought a ‘21 1794 Edition and would love an installation also lol
Great Video! You made it look easy!
@HeadlightRevolution
2 жыл бұрын
Thanks Lloyd!
@lloydedmonds8775
2 жыл бұрын
@@HeadlightRevolution I’m in VIrginia; wanna do mine 🤗
@HeadlightRevolution
2 жыл бұрын
We are in Georgia, a bit of a drive!
@lloydedmonds8775
2 жыл бұрын
@@HeadlightRevolution lol Not at all if your looking for a nice vacation in Virginia Beach 🤗
As a public service you ought to note what is hopefully obvious, the light bar section should only be used off road. Seeing the brightness in your video it appears that section would just about vaporize the retinas of an oncoming driver on the road. Already have seen people mounting super bright light bars up in their truck grills and using them on the highway in normal traffic. Waaay too bright for on road use. Thanks
@HeadlightRevolution
4 жыл бұрын
yes!
@tallll70
4 жыл бұрын
exactly, only 4 head light bulbs are allowed...10 years ago i had bumper bar pointing down on road consisting of 6 skinny driving lights, i did install light bulb cap shield to all of them, it certainly blind way less, but they were just too small parabolas for the light output...it can't ever be used on road if there is little consideration left in user
Does this one work for tundra 2021
So awesome! But will it work with my 2020 platinum tundra?? It is loaded with tech and all the buttons are used up under the infotainment area...
@HeadlightRevolution
3 жыл бұрын
I am sorry to say that this will not work with that 2020 model Tundra, but NSV is working on a lightbar for that vehicle as well! They will have that available sometime late this year, and we will keep you posted when that is ready to order!
@andrewbirisan
3 жыл бұрын
So awesome. Thank you for the reply.
@HeadlightRevolution
3 жыл бұрын
Not a problem, let us know if you have any other questions!
@highpro1394
3 жыл бұрын
Sweet. I have been wondering the same thing. I want that light bar but I too have a 2020 tundra platinum. Cant wait to see what they come up with so it will work with my truck!
Is there a way to turn off the “drl” on the light bar? It looks a bit silly and with the headlights already being bright on their own, the extra lights on the light bar might be a bit extensive.
What kind of wheels do you guys have on this truck. Love them.
@HeadlightRevolution
4 жыл бұрын
This was a sharp looking truck, We loved having it in here! Unfortunately I don't have the wheel info, It belonged to a customer.
Is there any way you make one with one switch on and off not with all the other thing cause I have a switch panels and want one button on and off
@HeadlightRevolution
3 жыл бұрын
There is nun unfortunately.
Is there one for a 2011 Tundra? Or a way to have a Knight Rider application for a 2011 Tundra?
@Gary-ib8dz
3 жыл бұрын
I also have 2011 and would like one.
Love this! Knight Rider 3000
@HeadlightRevolution
4 жыл бұрын
It’s one of our favorite products here!
@ebinrock
4 жыл бұрын
Actually, the TV movie "Knight Rider 2000" (1991) depicted a Knight Industries 4000 car. So you'll need a higher model number!
Do you have for tundra 2021! Off road
I love it but the price is prohibitive....does HR give military discounts to us Vets??
@HeadlightRevolution
2 жыл бұрын
We do, reach out to our customer service team to inquire about this! Sales@headlightrevolution.com
Next thing you know and youll get charge with impersonating a police officer lol
@HeadlightRevolution
4 жыл бұрын
Definitely for off road use only!
This light looks clean when installed inside the hood, but at the end of the day, is still only a light bar, a light bar you can only turn it on when you’re off road, I would pay $500 but not 1k, is way too expensive for the average driver on the roads.
@HeadlightRevolution
4 жыл бұрын
It's geared more towards people very serious about off-roading. To each their own though!
That light is very cool.
@HeadlightRevolution
4 жыл бұрын
It’s so fun to drive with, Our shop Tundra had it installed and I borrowed it for a few evenings. -Chris W
If I replace my halogen headlight bulbs with gtr 2,0 H4 leds, would I still need to cut that blue wire?
@Ryno041
2 жыл бұрын
I also pose this question. If the factory bulbs have been replaced with led's, does the blue wire get cut or remain intact?
@HeadlightRevolution
2 жыл бұрын
🧡
Need help! Followed this to the T. Have a 2016 and upgraded the headlights to the new OEM 2019 lights. Light bar works but now I get the hyper flash on my left turn signal and won’t even turn on. Also, my fog lights won’t turn on now. Thoughts?
@HeadlightRevolution
2 жыл бұрын
Hit our CS team with a call or email and we can get to the bottom of this with you! 218-755-5200 sales@headlightrevolution.com
i wonder if this can be installed in a Tacoma....?
@HeadlightRevolution
Жыл бұрын
It cannot, this is specific to the Tundras!
I love that light bar but I don’t like flashlight just need light bar only u another the same that light without flash light?
@HeadlightRevolution
4 жыл бұрын
Not at the moment no.
I have a 2020 Tundra TRD Sport. My stock panel has 3 USB ports along with the 12 volt plug, etc. Those 3 USB ports are exactly where the lightbar switches would be. Would I have to lose one of my USB ports? Is there a new panel available? Also (I'm just wondering), why does the blue wire on the turn signal plug need to be cut?
@HeadlightRevolution
4 жыл бұрын
Unfortunately that light bar is not out for the 2020 Tundra, but when it is you will not have to lose those USB plug ins when installing the light bar!
Do I have to cut that blue wire on my 2017 tundra? I upgraded from Halogen headlights to LED headlights, and used that harness wiring to upgrade my headlights.
@HeadlightRevolution
2 жыл бұрын
Reach out to our CS team for help troubleshooting! 218-755-5200 Sales@HeadlightRevolution.com
I totally love it, so reminds me of knight rider lol, but the toyota truck version lmao
@HeadlightRevolution
4 жыл бұрын
Right?!
Wow this is cool AF!
@HeadlightRevolution
4 жыл бұрын
Glad you like it!
Hello HeadLight Revolution ! Do you have please this gear for 2020 TUNDRA TRDPRO ? Thanks a lot. 👍🏽
His thumbs looks like toes. 😝
@HeadlightRevolution
4 жыл бұрын
Oh man lol
@williamwharton1068
4 жыл бұрын
Came here to say the same.
@emv8000
4 жыл бұрын
Handyman toes perhaps😁
$998.00 ,say what????
@HeadlightRevolution
4 жыл бұрын
I feel you, but people find a way to afford the things that are important to them! Good luck!
@whattodonext312
4 жыл бұрын
@@HeadlightRevolution Are these made in the USA?
@KeithSudano
4 жыл бұрын
@@HeadlightRevolution Or overspend for things they don't need.
@jeremythompson0306
4 жыл бұрын
John Balazs No there China made
@MyHandle201
3 жыл бұрын
@@HeadlightRevolution Rip OFF. It isn't even made in USA
Will this work for a 2012 tundra Rockwarrior the whole assembly? What’s the price?
@HeadlightRevolution
7 ай бұрын
Only for 14+ Tundra models.
Anything for the older tundras? I have a 2012.
@HeadlightRevolution
Жыл бұрын
Nothing like this but we do have options! Check out our website!
What lighting can I put on my 2002 tundra
@HeadlightRevolution
Ай бұрын
We have a ton of options! Enter your year/make/model here: www.headlightrevolution.com/
Hope this isn’t a dumb question...but is this light bar street legal? As in can I drive down a normal street or the highway with this light bar on?
@HeadlightRevolution
4 жыл бұрын
In most jurisdictions you cannot drive with a lightbar like this on the highway. They are really designed for off-road use only.
Will this work for a 2007
@HeadlightRevolution
Жыл бұрын
It will not.
Price point too high cmon guys
Hello I just bought the Jeep Grant Cheeroke 2020, the head light is yellow too dim. Is the anyway I can change the bulbs to HID lights bulb?
@HeadlightRevolution
4 жыл бұрын
I do not recommend an LED or HID kit for Headlight use, as they are not DOT Compliant and are not Legal for Street-Use. If you wish to upgrade your Headlights, I would suggest looking into a Brighter or more White-Colored Halogen bulb setup like Philips or Osram, which are DOT-Compliant. If your vehicle is Strictly Off-Road use only, or along the lines of a Privately used Farm truck, then you may upgrade the Headlights, as they are not being used on Public roads/areas. If you have any Questions for me, please email us directly and we'd be happy to help out where we can. Sales@HeadlightRevolution.com
Do they have a cheaper model that is one solid lit light bar? I don't need the DRL or the scanning lights. A single switch will do and without all those T-harnesses
@HeadlightRevolution
4 жыл бұрын
I wish they did, We do get asked about that every now and then. As of right now they don’t!
I wonder if Toyota will ever make a 1 ton or bigger truck to compete with its competitors?
@HeadlightRevolution
4 жыл бұрын
That’s a good question.
Considering this light for my 2019 Tundra. I've looked through the comments to see if anyone else asked about the "street legal" question. Meaning, has anyone had any problems running with the light bar on, while driving on city streets? Are people flashing lights back at you for "high beaming" annoyance? Just curious if anyone has experienced any of this. Thanks in advance for any feedback.
@HeadlightRevolution
2 жыл бұрын
This is not street legal, it is an off-road use only light bar minus the DRL feature.
@XxsoonerbornxX
Жыл бұрын
Yeah, it's not legal.
Running boards, remote start, and tonneau cover, all for the price of these lights. As George Bush senior used to say "Not gonna do it. Wouldn't be prudent."
@HeadlightRevolution
4 жыл бұрын
Why not do all of them? The truck is worth it!
@tpj1959
4 жыл бұрын
Headlight Revolution I probably will. I like what I see.
@ebinrock
4 жыл бұрын
(1) You just reminded me of Dana Carvey! (2) Why can't cars & trucks just have light bars instead of two separate headlights? Or brake/taillights for that matter?