North Bayou F80 Single Monitor Arm Installation
Тәжірибелік нұсқаулар және стиль
North Bayou F80 Monitor Arm Installation Guide
F80 Single Monitor Arm Bracket
Screen Size: 17 - 30 inch
Load Capacity: 2 - 9 kg
VESA: 75x75 - 100x100mm
Upright: 260mm
Rotation: 360°
Tilt: +85° to -30°
Swivel: 90°
After attaching the monitor, to adjust monitor arm to correct height
Press and hold down on monitor arm while adjusting tension with allen wrench.
When tension is balanced, move the monitors to your preferred position
Create your perfect workstation set-up today:
inxussolutions.com
www.lazada.sg/shop/inxus
shopee.sg/inxus
Find Us:
/ inxussolutions
/ inxussolutions
Пікірлер: 118
This is like the most perfect video I’ve ever seen on KZread . Exactly what I needed and exactly the right length and simplicity . Seriously thank you so much !
@andreaesguerra3680
Жыл бұрын
Legit.. 💯🙌🏼
@shurentheltaylor1151
Жыл бұрын
Simple and straight to the point! I’m one of the most non mechanically inclined people in the world!!! But I just put this together!! Feel kinda bad ass right now 😂😂😂
@wecloud4343
Жыл бұрын
Perfect one
@gary7vn
9 ай бұрын
Yeah, no 60 second intro, or stories about their trip to Spain in 1978. Good stuff.
Hey, I just purchased one of these and I can hardly wait until it arrives! 🙌👍
Very thankful for this video. Im too dumb to read the installation guide and this vid helped me to install it properly. 😊
Thank you! Its always easier to follow video instructions 🌞
Thanks! We all really appreciate it. Cheers
Such an easy tutorial to follow thanks 🙏🏼
0:49 can't find this to adjust
@Oliver-fy6xy
3 ай бұрын
Press the arm down to reveal
thanks for the guide had the same exact monitor aswell
Just what I needed. Thanks for the video.
Thanks, really useful video
Thank you so much!! Sadly the instructions that come in the box are useless. Thanks for this. Quick question though, how do you adjust the height and fix it one position without it springing up. I need to lower it slightly
Thanks for this, I thought I might have to hold the monitor and screw it in at the same time xd
Thank you so much. Tried for two days to figure out how to swivel the part you attach to the monitor to the correct up position. Wasn't until I saw you turn it with ease did I realize was turning the wrong thing. Wasn't quite as easy for me, but I did it!!!
@HoiYee97
Жыл бұрын
How to swivel it ?
This is the most perfect video!!
1000% Positive Video!
How to use 360 its so hard to rotate
Question: with the Grommet installation, can i pass my cables thtought that hole, without drilling a different hole, cause my desk is attached to my wall.
Thanks, I'm having a hard time how to do it properly
I have a question. Can you mount this arm upside down?
What is the size of the grommet installation rod and screw?
I am fighting with the height adjustment 😂
All screen have those 4 hole behind ?
this good for drawing tablets?
I don’t have holes on the back of my monitor?
Instructions in the box are trash. Video is perfect
can this apply on the lg 32 ultra monitor ?
Does anyone know where can I buy the VESA Adapter Plate
It's a fine monitor arm especially for the price but it's quite shaky compared to the legendary rebranded Ergotron LX from Amazon.
What's the clamp lenght?
Does anyone know what is the type of the 4 screws that I should use to mount the top half of the arm to te panel if I have a zowie xl2540k? Because i have the screws that were mounted in the monitor at first, plus the longer and smaller screws with the little black plastic height adjusters that were in the f80 arm box. and don't know which one are the right ones
@Mochichino15
Жыл бұрын
Use the one from your monitor
Mine doesnt asjust and I dont want to return it. I have use 53 seconds screw and it does nothing so now my monitors are off... OMG its always one thing
Nice, the instruction paper totally sucks especially adjusting the height
Sucks that there is no way to tighten the 360 rotation. My only real criticism.
did you drill the holes on your back monitor or it's a fixed holes?
@gwenstefani1920
10 ай бұрын
Its fixed. Those monitors are called Vesa monitors, they are for this mount, but if you have this mount and your monitor is not vesa, u can buy a bracket for it. Like me cause i bought it without knowing my monitor is not vesa 💀 so im waiting for the bracket to be delivered
@williamtoledo8331
10 ай бұрын
@@gwenstefani1920 thank you for the response, i got mine now and i'm lucky that my monitor is vesa. hoping that your bracket will be in good condition and delivered immediately!!!
Why mine not come down like that I can make lose to come down
Mine came with a gas leak and it doesn’t hold the monitor up
do you drill holes in your table?
@Quasarii
2 ай бұрын
yes, you can do either drill a hole or clip it if one is unavailable
We cant find the tesion balance
What's the song?
I installed an 18-inch portable screen on this, but at the minimum tension, the arm springs up strongly. What can I do?
@derbybOyzZ
2 ай бұрын
Add a gold bar to the back of your monitor to increase the weight.
That lower cable management at 1:06 is so stiff on my monitor arm that my cable just doesn't get pushed inside it
@laffeyretrofit
3 ай бұрын
same, it so annoying
0:21 mine does not fit. It's missing something...
1:02 is the hardest part. It’s hard to unlock the screws 😭
Unfortunately your product cant handle my 30 inch monitor
i cant do 1:00 my screws are too tight😢
My monitor doesnt go down at all Edit: how do I make it stay there
@asher3527
8 ай бұрын
help me please my monitor won’t go up or down 😭😭
@shinyu7079
Ай бұрын
found a fix?
I have 3 left over screw wtf
Why does my arm dont go down its stiff
@jyo534
6 ай бұрын
same issue here
I cannot do minutes 0.34 😢
HOW DID YOU DO 0:33?!?!?! IT IS SO HARD TO TILT THAT WAY
@duduza1
10 ай бұрын
I MANAGED TO DO IT ONCE BUT I AIN'T GOT THE STRENGTH TO DO SO ANYMORE
@muratpinkman9679
3 ай бұрын
did yoy find ?
1:00 why cant mine do that, i tried to loosen it but its so hard
@TimTinhTran
2 жыл бұрын
MIne too >_
@makovibes4590
2 жыл бұрын
SAME
@CS-et4fs
2 жыл бұрын
Have u figure it out? I dont want to risk putting force on it
@TimTinhTran
2 жыл бұрын
@@CS-et4fs i forced mine, and it's fine. They just tightened it too much.
@CS-et4fs
2 жыл бұрын
@@TimTinhTran i seeeeee. Gonna try it now
So should i make a hole on my table just to install this thing? Serious question, anybody? 😅
@itslcchs
9 ай бұрын
No, you can mount it by the edge too
@chester9718
9 ай бұрын
@@itslcchswhy people pierce a hole then ? I’m lost 😢
@-pp-
7 ай бұрын
@@chester9718there is two type of holding c clamp (which is not making hole) and grommet (making holes) most of arms comes with two methods
You have to do a hole to your desk ? ☹️
@GauravSingh86
10 ай бұрын
The Hole Mount is just one extra way to mount it. Go with regular clamp mount otherwise.
@just_OsaMa23
2 ай бұрын
It's also stuped... U can just mount it over 5cm or less diameter hole Bro if IKEA desks hole is 8cm how the f do these companies do less than 5???????????
How to rotate the plate like 0:35 ?
@muratpinkman9679
3 ай бұрын
did you find brother ?
@faizulazim17
3 ай бұрын
@@muratpinkman9679 yeah i just rotate it as hard as i could and it work😅
@afiqahsamsuri4425
2 ай бұрын
Mine cannot, looks like it was locked somewhere. Help me
@faizulazim17
2 ай бұрын
@@afiqahsamsuri4425 mine was so tightt but i just rotate it as hard as i could like in the video😓
so if i dont have a hole in my desk im screwed?
@gamesturbator
Жыл бұрын
No, but you can screw the hole if it pleases you. 😝😝 There's 2 ways to do it. You can mount it from the edge, though many "gaming" desks don't give a lot of room there. Or you can drill a hole (not ideal for many) through the desk and mount it from the top (using the long screw with a grommet) The company is not great with English, as evidenced by their replies on Amazon. For instance, the instructions call the vertical angle of the arm "swivel", a term which means side to side rotation, not an up and down angle. It also shows a hex screw in the diagram of the side of the arm joint, supposedly to adjust tension, but in reality it's a machine pressed metal rivet, NOT a hex screw. That scew is inside the _top_ unlike what is shown in the diagram.
@cypher0124
Жыл бұрын
@@gamesturbator yeah i just would have appreciated a part of the video of this is what it looks like with no desk holes. I got mine set up on the edge of the desk with clamp only.
*Flight Pilot flashbacks*
can't move my plate like that 0:34 anyone can help?
@Leandco
2 жыл бұрын
Same
@draxible5902
2 жыл бұрын
Help pls how
@raffysamillano
Жыл бұрын
it can be rotated, just need some pressure
@ninthseeker2541
Жыл бұрын
@@raffysamillano Yep
@raghadsm
Жыл бұрын
@@raffysamillano Thank you so much ❤️
Hi, for grommet installation, my table is just 15mm thick, will that be enough? 🥹
I can't loosen it like 0:50, it comes already at position 0:44, which makes it hard to even see the screw. Not to mention it's not budging at all.
@JoshbigD
2 жыл бұрын
ey man i have the same problem by any chance have u fixed it and how?
@stealth1384
2 жыл бұрын
@@JoshbigD yes, there was a plastic cover on there, it took some force to remove it. After I removed the plastic cover, I installed my monitor on the stand and I was able to push that arm to go down. It will go back up so hold it down and it should expose the screw in which you will loosen with the Allen wrench provided.
@stealth1384
2 жыл бұрын
@@JoshbigD at 0:45 you can see the person pushing that arm down, after you push it down the screw will be exposed. How ever you have to install your monitor on the arm first or the arm won’t go down.
@co_obs
2 жыл бұрын
@@stealth1384 thanks that helped
@saintcIare
Жыл бұрын
@@stealth1384 hi what do you mean by plastic cover and where can you see it?
Pag magaan monitor mo kahit sobrang higpit tumataas pa din siya, Ayaw bumaba, Kulang nalang basagin ko to sa sobrang inis
It's stuped... U can just mount it over 5cm or less diameter hole Bro if IKEA desks hole is 8cm how the f do these companies do less than 5???????????
Do Not buy😡😡😡
Wait I had to make a hole?